Linux version 2.6.19-gentoo-r5 (root@darkside) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #17 Fri Jun 1 16:35:29 EDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable) BIOS-e820: 000000003f7d0000 - 000000003f7de000 (ACPI data) BIOS-e820: 000000003f7de000 - 000000003f800000 (ACPI NVS) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 119MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 260048) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 260048 early_node_map[1] active PFN ranges 0: 0 -> 260048 On node 0 totalpages: 260048 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 239 pages used for memmap HighMem zone: 30433 pages, LIFO batch:7 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 ACPIAM ) @ 0x000f8870 ACPI: RSDT (v001 A M I OEMRSDT 0x10000527 MSFT 0x00000097) @ 0x3f7d0000 ACPI: FADT (v002 A M I OEMFACP 0x10000527 MSFT 0x00000097) @ 0x3f7d0200 ACPI: MADT (v001 A M I OEMAPIC 0x10000527 MSFT 0x00000097) @ 0x3f7d0390 ACPI: MCFG (v001 A M I OEMMCFG 0x10000527 MSFT 0x00000097) @ 0x3f7d03f0 ACPI: OEMB (v001 A M I AMI_OEM 0x10000527 MSFT 0x00000097) @ 0x3f7de040 ACPI: MCFG (v001 A M I OEMMCFG 0x10000527 MSFT 0x00000097) @ 0x3f7d4b60 ACPI: SSDT (v001 AMI0 CPU1PM 0x00000001 INTL 0x02002026) @ 0x3f7d4ba0 ACPI: DSDT (v001 255EI 255EI008 0x00000008 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3f800000:a0800000) Detected 1733.478 MHz processor. Built 1 zonelists. Total pages: 258017 Kernel command line: root=/dev/sda3 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1024036k/1040192k available (3448k kernel code, 15592k reserved, 1701k data, 240k init, 122688k highmem) virtual kernel memory layout: fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0686000 - 0xc06c2000 ( 240 kB) .data : 0xc045e25b - 0xc0607950 (1701 kB) .text : 0xc0100000 - 0xc045e25b (3448 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3468.16 BogoMIPS (lpj=1734083) Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 tbxface-0107 [01] load_tables : ACPI Tables successfully acquired Parsing all Control Methods: Table [DSDT](id 0006) - 614 Objects with 62 Devices 169 Methods 19 Regions Parsing all Control Methods: Table [SSDT](id 0004) - 12 Objects with 0 Devices 4 Methods 0 Regions ACPI Namespace successfully loaded at root c0728690 evxfevnt-0089 [02] enable : Transition to ACPI mode successful ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered ACPI: 2 duplicate MCFG table ignored. PCI: Using MMCONFIG Setting up standard PCI resources pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty pci_get_subsys() called while pci_devices is still empty evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:.............................................................................................. Initialized 18/19 Regions 13/13 Fields 28/28 Buffers 35/37 Packages (635 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods: Executed 0 _INI methods requiring 0 _STA executions (examined 66 objects) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) [ACPI Debug] String: [0x0D] "BAT_STA Start" Boot video device is 0000:00:02.0 PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#02) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 18 (level, low) -> IRQ 16 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[ffcff000-ffcff7ff] Max Packet=[2048] IR/IT contexts=[4/8] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bus 2, cardbus bridge: 0000:01:03.0 IO window: 0000c000-0000c0ff IO window: 0000c400-0000c4ff PREFETCH window: 42000000-43ffffff MEM window: 44000000-45ffffff PCI: Bridge: 0000:00:1e.0 IO window: c000-dfff MEM window: ff400000-ffcfffff PREFETCH window: bdf00000-bfefffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 17 (level, low) -> IRQ 17 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14a apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.27 [Flags: R/W DEBUG]. io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). ACPI: AC Adapter [AC0] (off-line) [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x03] "BIF" ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (52 C) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d4925900719] floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 19 (level, low) -> IRQ 18 eth0: RTL8169sb/8110sb at 0xf8836c00, 00:03:0d:3a:00:c6, IRQ 18 netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0: I/O resource 0x1F0-0x1F7 not free. ide0: ports already in use, skipping probe Probing IDE interface ide1... hdc: PHILIPS CD-RW/DVD-ROM SCB5265, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 3ware Storage Controller device driver for Linux v1.26.02.001. ahci 0000:00:1f.2: version 2.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 ahci: probe of 0000:00:1f.2 failed with error -12 ata_piix 0000:00:1f.2: version 2.00ac6 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 ata: 0x170 IDE port busy ata: conflict with ide1 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14 ata2: DUMMY scsi0 : ata_piix ata1.00: ATA-7, max UDMA/100, 78242976 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: applying bridge limits ata1.00: configured for UDMA/100 scsi1 : ata_piix scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0402H UC20 PQ: 0 ANSI: 5 SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 Fusion MPT base driver 3.04.02 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.02 ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffe3fc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e480 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000e800 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000e880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usb 3-2: new low speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. input: DELL DELL USB Keyboard as /class/input/input0 input: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.1-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver i8042.c: Detected active multiplexing controller, rev 1.0. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver i2c-core: driver [dev_driver] registered ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18 i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt i2c_adapter i2c-0: adapter [SMBus I801 adapter at 0400] registered i2c-dev: adapter [SMBus I801 adapter at 0400] registered as minor 0 i2c-core: driver [ds1337] registered i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x68 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=d0, DAT0=0e, DAT1=00 input: AT Translated Set 2 keyboard as /class/input/input1 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=d0, DAT0=0e, DAT1=00 i2c-core: driver [ds1374] registered i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x68 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=d0, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=d0, DAT0=0e, DAT1=00 i2c-core: driver [eeprom] registered i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x50 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=a0, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=a0, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=a0, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=a0, DAT0=0e, DAT1=00 i2c_adapter i2c-0: client [eeprom] registered with bus id 0-0050 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x51 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=a2, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=a2, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x52 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=a4, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=a4, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=a4, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=a4, DAT0=0e, DAT1=00 i2c_adapter i2c-0: client [eeprom] registered with bus id 0-0052 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x53 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=a6, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=a6, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x54 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=a8, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=a8, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x55 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=aa, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=aa, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x56 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=ac, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=ac, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x57 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=ae, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=ae, DAT0=0e, DAT1=00 i2c-core: driver [max6875] registered i2c-core: driver [pca9539] registered i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x74 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=e8, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=e8, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x75 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=ea, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=ea, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x76 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=ec, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=ec, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x77 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=ee, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=ee, DAT0=0e, DAT1=00 i2c-core: driver [pcf8574] registered i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x20 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=40, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=40, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x21 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=42, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=42, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x22 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=44, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=44, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x23 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=46, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=46, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x24 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=48, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=48, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x25 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=4a, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=4a, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x26 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=4c, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=4c, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x27 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=4e, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=4e, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x38 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=70, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=70, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x39 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=72, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=72, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x3a i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=74, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=74, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x3b i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=76, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=76, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x3c i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=78, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=78, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x3d i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=7a, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=7a, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x3e i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=7c, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=7c, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x3f i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=7e, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=7e, DAT0=0e, DAT1=00 i2c-core: driver [pcf8591] registered i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x48 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=90, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=90, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x49 i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=92, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=92, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x4a i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=94, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=94, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x4b i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=96, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=96, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x4c i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=98, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=98, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x4d i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=9a, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=9a, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x4e i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=9c, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=9c, DAT0=0e, DAT1=00 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x4f i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=9e, DAT0=0e, DAT1=00 i801_smbus 0000:00:1f.3: Error: no response! i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=9e, DAT0=0e, DAT1=00 device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com Intel 810 + AC97 Audio, version 1.01, 08:46:47 Apr 6 2007 Advanced Linux Sound Architecture Driver Version 1.0.13 (Tue Nov 28 14:07:24 2006 UTC). ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA device list: #0: HDA Intel at 0xffe38000 irq 20 oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' acpi_processor-0740 [00] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination acpi_processor-0740 [00] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination Using IPI Shortcut mode ACPI: (supports S0 S3 S4 S5) Time: tsc clocksource has been installed. Time: acpi_pm clocksource has been installed. Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a input: SynPS/2 Synaptics TouchPad as /class/input/input2 ReiserFS: sda3: found reiserfs format "3.6" with standard journal ReiserFS: sda3: using ordered data mode ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda3: checking transaction log (sda3) ReiserFS: sda3: journal-1153: found in header: first_unflushed_offset 2057, last_flushed_trans_id 276230 ReiserFS: sda3: journal-1206: Starting replay from offset 1186403111143433, trans_id 8 ReiserFS: sda3: journal-1299: Setting newest_mount_id to 159 ReiserFS: sda3: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 240k freed Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 intelfb: intelfb_init intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets intelfb: Version 0.9.4 intelfb: intelfb_pci_register ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20 intelfb: fb aperture: 0xd0000000/0x10000000, MMIO region: 0xffe80000/0x80000 intelfb: 00:02.0: Intel(R) 915GM, aperture size 256MB, stolen memory 7932kB intelfb: fb: 0xd0000000(+ 0x0)/0x7bf000 (0xf8b00000) intelfb: MMIO: 0xffe80000/0x80000 (0xfc300000) intelfb: ring buffer: 0xd3001000/0x10000 (0xfbb01000) intelfb: HW cursor: 0x0/0x0 (0x00000000) (offset 0x0) (phys 0x0) intelfb: options: vram = 4, accel = 1, hwcursor = 0, fixed = 0, noinit = 0 intelfb: options: mode = "" intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching. intelfb: Video mode must be programmed at boot time. intelfb: cleanup ieee80211_crypt: exports duplicate symbol ieee80211_crypt_deinit_entries (owned by kernel) ieee80211: disagrees about version of symbol ieee80211_get_crypto_ops ieee80211: Unknown symbol ieee80211_get_crypto_ops ieee80211: disagrees about version of symbol ieee80211_crypt_deinit_entries ieee80211: Unknown symbol ieee80211_crypt_deinit_entries ieee80211: disagrees about version of symbol ieee80211_crypt_delayed_deinit ieee80211: Unknown symbol ieee80211_crypt_delayed_deinit ieee80211: disagrees about version of symbol ieee80211_crypt_quiescing ieee80211: Unknown symbol ieee80211_crypt_quiescing ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.4kdmprq ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:01:07.0[A] -> GSI 19 (level, low) -> IRQ 18 ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels) ieee80211_crypt: exports duplicate symbol ieee80211_crypt_deinit_entries (owned by kernel) ieee80211: disagrees about version of symbol ieee80211_get_crypto_ops ieee80211: Unknown symbol ieee80211_get_crypto_ops ieee80211: disagrees about version of symbol ieee80211_crypt_deinit_entries ieee80211: Unknown symbol ieee80211_crypt_deinit_entries ieee80211: disagrees about version of symbol ieee80211_crypt_delayed_deinit ieee80211: Unknown symbol ieee80211_crypt_delayed_deinit ieee80211: disagrees about version of symbol ieee80211_crypt_quiescing ieee80211: Unknown symbol ieee80211_crypt_quiescing [drm] Initialized drm 1.0.1 20051102 [drm] Initialized i915 1.5.0 20060119 on minor 0 Adding 996020k swap on /dev/sda2. Priority:-1 extents:1 across:996020k r8169: eth0: link up usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1 [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" [ACPI Debug] String: [0x0D] "BAT_STA Start" usb 3-2: USB disconnect, address 2 usb 3-2: new low speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice input: DELL DELL USB Keyboard as /class/input/input4 input: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.1-2 hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling... usb 2-1: USB disconnect, address 2 usb 2-1: new low speed USB device using uhci_hcd and address 3 usb 2-1: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input5 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1 usb 3-1: new low speed USB device using uhci_hcd and address 4 usb 3-1: configuration #1 chosen from 1 choice