Jump to Flash
Head : Amazon Version 1.0.0
DRAM:  16 MB

 Head : relocate_code start
Head: relocate code finish.
   Image Name:   u-boot image
   Image Type:   MIPS Linux Firmware (lzma compressed)
   Data Size:    38635 Bytes = 37.7 kB
   Load Address: 80100000
   Entry Point:  80100000
Disabling all the interrupts
   Uncompressing UBoot Image ... 
   Uncompression completed successfully with destLen 116328.
 Head: Jumping to u-boot in the ram at 0x80100000
Infineon Amazon 
U-Boot 2.0.18-M416 (Oct 30 2006 - 18:36:01)
In env_init : env_ptr = 0xb33f7000
Recovery process also failed.
For enviornment CRC32 is NOT OK
Board: AMAZON Yangtse Version, Chip V1.3, CPU Speed 235 MHz
DRAM:  16 MB

 relocate_code start
 relocate code finish

Entering flash_init()
flash_get_size
 type is 0000007f
 type is 000000f9
unknown flash id 0x7fflash get offsets fail
## Unknown FLASH on Bank 0 - Size = 0x00000000
Flash:  0 kB
env_relocate[224] malloced ENV at 80abf408
Using default environment


Initialize devices...
In:    serial
Out:   serial
Err:   serial
Net:   AMAZON Switch

Type "run flash_nfs" to mount root filesystem over NFS

Press enter key to stop autoboot:  0 
## Booting image at b33f4fff ...
Bad Magic Number
AMAZON #