Using PowerMac machine description Total memory = 512MB; using 1024kB for hash table (at cff00000) Linux version 2.6.21-1.3194.fc7 (kojibuilder@ppc1.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 Wed May 23 22:12:25 EDT 2007 Found initrd at 0xc1a00000:0xc1d41000 Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 Mapped at 0xfdfc0000 Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000 Processor NAP mode on idle enabled. PowerMac motherboard: iBook G4 via-pmu: Server Mode is disabled PMU driver v2 initialized for Core99, firmware: 0c Entering add_active_range(0, 0, 131072) 0 entries of 256 used Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 nvram: Checking bank 0... nvram: gen0=838, gen1=839 nvram: Active bank is: 1 nvram: OF partition at 0x410 nvram: XP partition at 0x1020 nvram: NR partition at 0x1120 Top of RAM: 0x20000000, Total RAM: 0x20000000 Memory hole size: 0MB Zone PFN ranges: DMA 0 -> 131072 Normal 131072 -> 131072 HighMem 131072 -> 131072 early_node_map[1] active PFN ranges 0: 0 -> 131072 On node 0 totalpages: 131072 DMA zone: 1024 pages used for memmap DMA zone: 0 pages reserved DMA zone: 130048 pages, LIFO batch:31 Normal zone: 0 pages used for memmap HighMem zone: 0 pages used for memmap Built 1 zonelists. Total pages: 130048 Kernel command line: ro root=LABEL=/ mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs mpic: ISU size: 64, shift: 6, mask: 3f mpic: Initializing for 64 sources PID hash table entries: 2048 (order: 11, 8192 bytes) GMT Delta read from XPRAM: 0 minutes, DST: off time_init: decrementer frequency = 18.432000 MHz time_init: processor frequency = 1066.666664 MHz Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) High memory: 0k Memory: 510336k/524288k available (3884k kernel code, 13432k reserved, 144k data, 338k bss, 208k init) Calibrating delay loop... 36.73 BogoMIPS (lpj=18368) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" NET: Registered protocol family 16 KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 channel 0 bus channel 1 bus KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 channel 0 bus PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c channel 1 bus channel 2 bus PCI: Probing PCI hardware PCI: Cannot allocate resource region 0 of device 0001:10:18.0 PCI: Cannot allocate resource region 0 of device 0001:10:19.0 Apple USB OHCI 0001:10:18.0 disabled by firmware Apple USB OHCI 0001:10:19.0 disabled by firmware mpc52xx-bestcomm: could not locate DMA controller DMA: MPC52xx BestComm init FAILED !!! Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3332k freed Thermal assist unit not available Registering PowerMac CPU frequency driver Low: 533 Mhz, High: 1066 Mhz, Boot: 533 Mhz audit: initializing netlink socket (disabled) audit(2212125635.954:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Enabling device 0000:00:10.0 (0006 -> 0007) radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55 radeonfb: Retrieved PLL infos from Open Firmware radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz radeonfb: PLL min 12000 max 35000 i2c_adapter i2c-2: unable to read EDID block. i2c_adapter i2c-2: unable to read EDID block. i2c_adapter i2c-2: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. radeonfb: Monitor 1 type LCD found radeonfb: EDID probed radeonfb: Monitor 2 type no found radeonfb: Using Firmware dividers 0x000600ad from PPLL 0 radeonfb: Dynamic Clock Power Management enabled Console: switching to colour frame buffer device 128x48 radeonfb: Backlight initialized (radeonbl0) radeonfb (0000:00:10.0): ATI Radeon \c Generic RTC Driver v1.07 Macintosh non-volatile memory driver v1.1 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected Apple UniNorth 2 chipset agpgart: configuring for size idx: 8 agpgart: AGP aperture is 32M @ 0x0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Serial: MPC52xx PSC UART driver RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize MacIO PCI driver attached to Intrepid chipset input: Macintosh mouse button emulation as /class/input/input0 apm_emu: APM Emulation 0.5 initialized. adb: starting probe task... Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI: Enabling device 0002:20:0d.0 (0000 -> 0002) adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f ADB keyboard at 2, handler 1 Detected ADB keyboard, type ANSI. input: ADB keyboard as /class/input/input1 input: ADB Powerbook buttons as /class/input/input2 ADB mouse at 3, handler set to 4 (trackpad) input: ADB mouse as /class/input/input3 adb: finished probe task... ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39 Probing IDE interface ide0... hda: FUJITSU MHT2030AT, ATA DISK drive hda: Enabling Ultra DMA 5 ide0 at 0xe102a000-0xe102a007,0xe102a160 on irq 39 ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24 Probing IDE interface ide1... hdc: QSI CD-ROM TCR-241, ATAPI CD/DVD-ROM drive hdc: Enabling MultiWord DMA 2 ide1 at 0xe1014000-0xe1014007,0xe1014160 on irq 24 hda: max request size: 512KiB hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: [mac] hda1 hda2 hda3 hda4 hda5 usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice PowerMac i2c bus pmu 2 registered PowerMac i2c bus pmu 1 registered PowerMac i2c bus mac-io 0 registered PowerMac i2c bus uni-n 1 registered PowerMac i2c bus uni-n 0 registered TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 input: PMU as /class/input/input4 Registered led device: pmu-front-led drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 208k init USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver Apple USB OHCI 0001:10:18.0 disabled by firmware Apple USB OHCI 0001:10:19.0 disabled by firmware PCI: Enabling device 0001:10:1a.0 (0000 -> 0002) ohci_hcd 0001:10:1a.0: OHCI Host Controller ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1 ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Enabling device 0001:10:1b.0 (0000 -> 0002) ohci_hcd 0001:10:1b.0: OHCI Host Controller ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected PCI: Enabling device 0001:10:1b.1 (0000 -> 0002) ohci_hcd 0001:10:1b.1: OHCI Host Controller ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 3 ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Enabling device 0001:10:1b.2 (0004 -> 0006) ehci_hcd 0001:10:1b.2: EHCI Host Controller ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 4 ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000 ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(2212125645.452:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats security: 60 classes, 65638 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev hda3, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(2212125646.462:3): policy loaded auid=4294967295 sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) PHY ID: 4061e4, addr: 0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:c2:6b:04 eth0: Found BCM5221 PHY PCI: Enabling device 0002:20:0e.0 (0000 -> 0002) fw_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.10 fw_core: created new fw device fw0 (0 config rom retries) pmac_zilog: 0.6 (Benjamin Herrenschmidt ) ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port hdc: ATAPI 24X CD-ROM drive, 512kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 input: PowerMac Beep as /class/input/input5 loop: loaded (max 8 devices) lp: driver loaded but no devices found device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on hda3, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (4096 buckets, 32768 max) NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ADDRCONF(NETDEV_UP): eth0: link is not ready SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SCSI subsystem initialized ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation bcm43xx driver eth0: Link is up at 100 Mbps, full-duplex. eth0: Link is up at 100 Mbps, full-duplex. eth0: Pause is disabled eth0: no IPv6 routers present