Mail version 8.1 6/6/93. Type ? for help. "/var/spool/mail/root": 4 messages 4 unread >U 1 root@localhost.local Mon May 29 01:56 30/1128 "SMART error (OfflineUncorrectableSector) detected on host: szand" U 2 root@localhost.local Mon May 29 01:56 30/1131 "SMART error (CurrentPendingSector) detected on host: szandor" U 3 root@localhost.local Mon May 29 03:01 39/1440 "LogWatch for szandor" U 4 root@localhost.local Mon May 29 04:02 39/1440 "LogWatch for szandor" & 1 Message 1: From root@localhost.localdomain Mon May 29 01:56:35 2006 Date: Mon, 29 May 2006 01:56:11 +0300 From: root To: root@localhost.localdomain Subject: SMART error (OfflineUncorrectableSector) detected on host: szandor This email was generated by the smartd daemon running on: host name: szandor DNS domain: [Unknown] NIS domain: (none) The following warning/error was logged by the smartd daemon: Device: /dev/hda, 1 Offline uncorrectable sectors For details see host's SYSLOG (default: /var/log/messages). You can also use the smartctl utility for further investigation. No additional email messages about this problem will be sent. & 2 Message 2: From root@localhost.localdomain Mon May 29 01:56:35 2006 Date: Mon, 29 May 2006 01:56:11 +0300 From: root To: root@localhost.localdomain Subject: SMART error (CurrentPendingSector) detected on host: szandor This email was generated by the smartd daemon running on: host name: szandor DNS domain: [Unknown] NIS domain: (none) The following warning/error was logged by the smartd daemon: Device: /dev/hda, 1 Currently unreadable (pending) sectors For details see host's SYSLOG (default: /var/log/messages). You can also use the smartctl utility for further investigation. No additional email messages about this problem will be sent. & 3 Message 3: From root@localhost.localdomain Mon May 29 03:01:40 2006 Date: Mon, 29 May 2006 03:01:39 +0300 From: root To: root@localhost.localdomain Subject: LogWatch for szandor ################### LogWatch 7.1 (11/12/05) #################### Processing Initiated: Mon May 29 03:01:39 2006 Date Range Processed: yesterday ( 2006-May-28 ) Period is day. Detail Level of Output: 0 Type of Output: unformatted Logfiles for Host: szandor ################################################################## --------------------- Disk Space Begin ------------------------ Filesystem Size Used Avail Use% Mounted on /dev/hda2 8.6G 3.6G 4.7G 44% / ---------------------- Disk Space End ------------------------- ###################### LogWatch End ######################### /var/log/messages __________________________________________________ May 29 01:56:10 szandor kernel: SELinux: initialized (dev autofs, type autofs), uses genfs_contexts May 29 01:56:10 szandor smartd[1513]: smartd version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen May 29 01:56:10 szandor smartd[1513]: Home page is http://smartmontools.sourceforge.net/ May 29 01:56:10 szandor smartd[1513]: Opened configuration file /etc/smartd.conf May 29 01:56:10 szandor smartd[1513]: Configuration file /etc/smartd.conf parsed. May 29 01:56:10 szandor smartd[1513]: Device: /dev/hda, opened May 29 01:56:10 szandor smartd[1513]: Device: /dev/hda, found in smartd database. May 29 01:56:10 szandor smartd[1513]: Device: /dev/hda, is SMART capable. Adding to "monitor" list. May 29 01:56:10 szandor smartd[1513]: Monitoring 1 ATA and 0 SCSI devices May 29 01:56:11 szandor smartd[1513]: Device: /dev/hda, 1 Currently unreadable (pending) sectors May 29 01:56:11 szandor smartd[1513]: Sending warning via mail to root ... May 29 01:56:11 szandor smartd[1513]: Warning via mail to root: successful May 29 01:56:11 szandor smartd[1513]: Device: /dev/hda, 1 Offline uncorrectable sectors May 29 01:56:11 szandor smartd[1513]: Sending warning via mail to root ... May 29 01:56:11 szandor smartd[1513]: Warning via mail to root: successful May 29 01:56:11 szandor smartd[1521]: smartd has fork()ed into background mode. New PID=1521. May 29 01:56:11 szandor hpiod: 0.9.8 accepting connections at 50000... May 29 01:56:13 szandor kernel: ppdev: user-space parallel port driver May 29 01:56:14 szandor hpiod: ParDevice::nibble_read failed: Input/output error May 29 01:56:34 szandor gpm[1632]: *** info [startup.c(95)]: May 29 01:56:34 szandor gpm[1632]: Started gpm successfully. Entered daemon mode. _______________________________ -only configuration source at position 0 May 29 02:27:08 szandor gconfd (nuambenzina-3562): Resolved address "xml:readwrite:/home/nuambenzina/.gconf" to a writable configuration source at position 1 May 29 02:27:08 szandor gconfd (nuambenzina-3562): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read- only configuration source at position 2 May 29 02:56:12 szandor smartd[1521]: Device: /dev/hda, 1 Currently unreadable (pending) sectors May 29 02:56:12 szandor smartd[1521]: Device: /dev/hda, 1 Offline uncorrectable sectors May 29 03:26:11 szandor smartd[1521]: Device: /dev/hda, 1 Currently unreadable (pending) sectors May 29 03:26:11 szandor smartd[1521]: Device: /dev/hda, 1 Offline uncorrectable sectors May 29 03:56:11 szandor smartd[1521]: Device: /dev/hda, 1 Currently unreadable (pending) sectors May 29 03:56:11 szandor smartd[1521]: Device: /dev/hda, 1 Offline uncorrectable sectors Use smartctl -h to get a usage summary [root@szandor ~]# smartctl -h smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Usage: smartctl [options] device ============================================ SHOW INFORMATION OPTIONS ===== -h, --help, --usage Display this help and exit -V, --version, --copyright, --license Print license, copyright, and version information and exit -i, --info Show identity information for device -a, --all Show all SMART information for device ================================== SMARTCTL RUN-TIME BEHAVIOR OPTIONS ===== -q TYPE, --quietmode=TYPE (ATA) Set smartctl quiet mode to one of: errorsonly, silent -d TYPE, --device=TYPE Specify device type to one of: ata, scsi, marvell, 3ware,N -T TYPE, --tolerance=TYPE (ATA) Tolerance: normal, conservative, permissive, verypermissive -b TYPE, --badsum=TYPE (ATA) Set action on bad checksum to one of: warn, exit, ignore -r TYPE, --report=TYPE Report transactions (see man page) ============================== DEVICE FEATURE ENABLE/DISABLE COMMANDS ===== -s VALUE, --smart=VALUE Enable/disable SMART on device (on/off) -o VALUE, --offlineauto=VALUE (ATA) Enable/disable automatic offline testing on device (on/off) -S VALUE, --saveauto=VALUE (ATA) Enable/disable Attribute autosave on device (on/off) ======================================= READ AND DISPLAY DATA OPTIONS ===== -H, --health Show device SMART health status -c, --capabilities (ATA) Show device SMART capabilities -A, --attributes Show device SMART vendor-specific Attributes and values -l TYPE, --log=TYPE Show device log. TYPE: error, selftest, selective, directory -v N,OPTION , --vendorattribute=N,OPTION (ATA) Set display OPTION for vendor Attribute N (see man page) -F TYPE, --firmwarebug=TYPE (ATA) Use firmware bug workaround: none, samsung, samsung2 -P TYPE, --presets=TYPE (ATA) Drive-specific presets: use, ignore, show, showall ============================================ DEVICE SELF-TEST OPTIONS ===== -t TEST, --test=TEST Run test. TEST is: offline short long conveyance select,M-N pending,N afterselect,on afterselect,off -C, --captive Do test in captive mode (along with -t) -X, --abort Abort any non-captive test on device =================================================== SMARTCTL EXAMPLES ===== smartctl -a /dev/hda (Prints all SMART information) smartctl --smart=on --offlineauto=on --saveauto=on /dev/hda (Enables SMART on first disk) smartctl -t long /dev/hda (Executes extended disk self-test) smartctl --attributes --log=selftest --quietmode=errorsonly /dev/hda (Prints Self-Test & Attribute errors) smartctl -a --device=3ware,2 /dev/sda (Prints all SMART info for 3rd ATA disk on 3ware RAID controller) [root@szandor ~]# smartctl -a /dev/hda smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: ST3120026A Serial Number: 5JT2J6E8 Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon May 29 04:23:47 2006 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 25) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 063 056 006 Pre-fail Always - 25009039 3 Spin_Up_Time 0x0003 099 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 525 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 8972137004 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 10341 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 2037 194 Temperature_Celsius 0x0022 039 053 000 Old_age Always - 39 195 Hardware_ECC_Recovered 0x001a 063 056 000 Old_age Always - 25009039 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x003e 200 162 000 Old_age Always - 326 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 294 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 294 occurred at disk power-on lifetime: 10281 hours (428 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 f5 c3 30 e0 Error: UNC at LBA = 0x0030c3f5 = 3195893 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 d8 08 ef c3 30 e0 00 00:06:37.394 READ DMA c8 d8 01 00 00 00 e0 00 00:06:37.393 READ DMA c8 d8 01 00 00 00 e0 00 00:06:37.381 READ DMA c8 d8 08 df c3 30 e0 00 00:06:37.369 READ DMA c8 d8 01 00 00 00 e0 00 00:06:33.383 READ DMA Error 293 occurred at disk power-on lifetime: 10281 hours (428 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 f5 c3 30 e0 Error: UNC at LBA = 0x0030c3f5 = 3195893 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 d8 38 df c3 30 e0 00 00:06:28.553 READ DMA c8 d8 01 00 00 00 e0 00 00:06:28.544 READ DMA c8 d8 01 00 00 00 e0 00 00:06:28.524 READ DMA c8 d8 20 46 d5 49 e0 00 00:06:28.524 READ DMA c8 d8 01 00 00 00 e0 00 00:06:33.383 READ DMA Error 292 occurred at disk power-on lifetime: 10281 hours (428 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 f5 c3 30 e0 Error: UNC at LBA = 0x0030c3f5 = 3195893 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 d8 08 ef c3 30 e0 00 00:06:28.553 READ DMA c8 d8 08 67 d7 30 e0 00 00:06:28.544 READ DMA c8 d8 08 a7 80 30 e0 00 00:06:28.524 READ DMA c8 d8 08 e7 c3 30 e0 00 00:06:28.524 READ DMA c8 d8 08 ef e4 2f e0 00 00:06:28.510 READ DMA Error 291 occurred at disk power-on lifetime: 9698 hours (404 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 bf cb 3e e1 Error: ICRC, ABRT 1 sectors at LBA = 0x013ecbbf = 20892607 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 b8 cb 3e e1 00 00:01:12.690 READ DMA c8 03 08 d8 31 20 e1 00 00:01:12.676 READ DMA c8 03 08 d0 31 20 e1 00 00:01:12.737 READ DMA c8 03 08 d8 33 1e e1 00 00:01:12.736 READ DMA c8 03 08 d0 33 1e e1 00 00:01:12.730 READ DMA Error 290 occurred at disk power-on lifetime: 9698 hours (404 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 97 f8 fc e0 Error: ICRC, ABRT at LBA = 0x00fcf897 = 16578711 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 97 f8 fc e0 00 00:10:13.365 READ DMA EXT 25 00 00 97 f8 fc e0 00 00:10:13.361 READ DMA EXT 10 00 3f 00 00 00 e0 00 00:10:13.349 RECALIBRATE [OBS-4] 25 00 00 97 f8 fc e0 00 00:10:13.344 READ DMA EXT 25 00 00 97 f8 fc e0 00 00:10:13.337 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 90% 8755 - # 2 Short offline Completed without error 00% 6380 - # 3 Short offline Aborted by host 70% 6380 - # 4 Short offline Completed without error 00% 3275 - # 5 Short offline Completed without error 00% 3037 - # 6 Short offline Completed without error 00% 2817 - # 7 Short offline Completed without error 00% 2785 - # 8 Extended offline Interrupted (host reset) 60% 2785 - # 9 Short offline Completed without error 00% 2785 - #10 Short offline Completed without error 00% 2740 - #11 Short offline Completed without error 00% 1778 - #12 Short offline Completed without error 00% 1769 - #13 Extended offline Interrupted (host reset) 90% 859 - #14 Short offline Completed without error 00% 859 - #15 Short offline Completed without error 00% 859 - #16 Short offline Completed without error 00% 769 - #17 Short offline Completed without error 00% 769 - #18 Short offline Completed without error 00% 202 - #19 Short offline Completed without error 00% 51 - #20 Short offline Aborted by host 50% 51 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. [root@szandor ~]# smartctl -h smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Usage: smartctl [options] device ============================================ SHOW INFORMATION OPTIONS ===== -h, --help, --usage Display this help and exit -V, --version, --copyright, --license Print license, copyright, and version information and exit -i, --info Show identity information for device -a, --all Show all SMART information for device ================================== SMARTCTL RUN-TIME BEHAVIOR OPTIONS ===== -q TYPE, --quietmode=TYPE (ATA) Set smartctl quiet mode to one of: errorsonly, silent -d TYPE, --device=TYPE Specify device type to one of: ata, scsi, marvell, 3ware,N -T TYPE, --tolerance=TYPE (ATA) Tolerance: normal, conservative, permissive, verypermissive -b TYPE, --badsum=TYPE (ATA) Set action on bad checksum to one of: warn, exit, ignore -r TYPE, --report=TYPE Report transactions (see man page) ============================== DEVICE FEATURE ENABLE/DISABLE COMMANDS ===== -s VALUE, --smart=VALUE Enable/disable SMART on device (on/off) -o VALUE, --offlineauto=VALUE (ATA) Enable/disable automatic offline testing on device (on/off) -S VALUE, --saveauto=VALUE (ATA) Enable/disable Attribute autosave on device (on/off) ======================================= READ AND DISPLAY DATA OPTIONS ===== -H, --health Show device SMART health status -c, --capabilities (ATA) Show device SMART capabilities -A, --attributes Show device SMART vendor-specific Attributes and values -l TYPE, --log=TYPE Show device log. TYPE: error, selftest, selective, directory -v N,OPTION , --vendorattribute=N,OPTION (ATA) Set display OPTION for vendor Attribute N (see man page) -F TYPE, --firmwarebug=TYPE (ATA) Use firmware bug workaround: none, samsung, samsung2 -P TYPE, --presets=TYPE (ATA) Drive-specific presets: use, ignore, show, showall ============================================ DEVICE SELF-TEST OPTIONS ===== -t TEST, --test=TEST Run test. TEST is: offline short long conveyance select,M-N pending,N afterselect,on afterselect,off -C, --captive Do test in captive mode (along with -t) -X, --abort Abort any non-captive test on device =================================================== SMARTCTL EXAMPLES ===== smartctl -a /dev/hda (Prints all SMART information) smartctl --smart=on --offlineauto=on --saveauto=on /dev/hda (Enables SMART on first disk) smartctl -t long /dev/hda (Executes extended disk self-test) smartctl --attributes --log=selftest --quietmode=errorsonly /dev/hda (Prints Self-Test & Attribute errors) smartctl -a --device=3ware,2 /dev/sda (Prints all SMART info for 3rd ATA disk on 3ware RAID controller) [root@szandor ~]# smartctl -H /dev/hda smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED [root@szandor ~]# smartctl -t /dev/hda smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ =======> INVALID ARGUMENT TO -t: /dev/hda =======> VALID ARGUMENTS ARE: offline, short, long, conveyance, select,M-N, pending,N, afterselect,on, afterselect,off <======= Use smartctl -h to get a usage summary [root@szandor ~]# smartctl -t long /dev/hda smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 85 minutes for test to complete. Test will complete after Mon May 29 05:53:04 2006 Use smartctl -X to abort test. [root@szandor ~]#