protocols = pop3
ssl_cert_file = /etc/ssl/dovecot/server.pem
ssl_key_file = /etc/ssl/dovecot/server.key
   # Hierarchy separator to use. You should use the same separator for all
   # namespaces or some clients get confused. '/' is usually a good one.
   # The default however depends on the underlying mail storage format.
   #separator =
   # Prefix required to access this namespace. This needs to be different for
   # all namespaces. For example "Public/".
   #prefix =
   # Physical location of the mailbox. This is in same format as
   # mail_location, which is also the default for it.
   #location =
   # There can be only one INBOX, and this setting defines which namespace
   # has it.
   #inbox = yes
   # If namespace is hidden, it's not advertised to clients via NAMESPACE
   # extension or shown in LIST replies. This is mostly useful when converting
   # from another server with different namespaces which you want to depricate
   # but still keep working. For example you can create hidden namespaces with
   # prefixes "~/mail/", "~%u/mail/" and "mail/".
   #hidden = yes
protocol imap {
  # Login executable location.
  #login_executable = /usr/libexec/dovecot/imap-login
  # IMAP executable location. Changing this allows you to execute other
  # binaries before the imap process is executed.
  #
  # This would write rawlogs into ~/dovecot.rawlog/ directory:
  #   mail_executable = /usr/libexec/dovecot/rawlog /usr/libexec/dovecot/imap
  #
  # This would attach gdb into the imap process and write backtraces into
  # /tmp/gdbhelper.* files:
  #   mail_executable = /usr/libexec/dovecot/gdbhelper /usr/libexec/dovecot/imap
  #
  #mail_executable = /usr/libexec/dovecot/imap
  # Maximum IMAP command line length in bytes. Some clients generate very long
  # command lines with huge mailboxes, so you may need to raise this if you get
  # "Too long argument" or "IMAP command line too large" errors often.
  #imap_max_line_length = 65536
  # Support for dynamically loadable plugins. mail_plugins is a space separated
  # list of plugins to load.
  #mail_plugins =
  #mail_plugin_dir = /usr/lib/dovecot/imap
  # Send IMAP capabilities in greeting message. This makes it unnecessary for
  # clients to request it with CAPABILITY command, so it saves one round-trip.
  # Many clients however don't understand it and ask the CAPABILITY anyway.
  #login_greeting_capability = no
  # Override the IMAP CAPABILITY response.
  #imap_capability =
  # Workarounds for various client bugs:
  #   delay-newmail:
  #     Send EXISTS/RECENT new mail notifications only when replying to NOOP
  #     and CHECK commands. Some clients ignore them otherwise, for example OSX
  #     Mail (<v2.1). Outlook Express breaks more badly though, without this it
  #     may show user "Message no longer in server" errors. Note that OE6 still
  #     breaks even with this workaround if synchronization is set to
  #     "Headers Only".
  #   outlook-idle:
  #     Outlook and Outlook Express never abort IDLE command, so if no mail
  #     arrives in half a hour, Dovecot closes the connection. This is still
  #     fine, except Outlook doesn't connect back so you don't see if new mail
  #     arrives.
  #   netscape-eoh:
  #     Netscape 4.x breaks if message headers don't end with the empty "end of
  #     headers" line. Normally all messages have this, but setting this
  #     workaround makes sure that Netscape never breaks by adding the line if
  #     it doesn't exist. This is done only for FETCH BODY[HEADER.FIELDS..]
  #     commands. Note that RFC says this shouldn't be done.
  #   tb-extra-mailbox-sep:
  #     With mbox storage a mailbox can contain either mails or submailboxes,
  #     but not both. Thunderbird separates these two by forcing server to
  #     accept '/' suffix in mailbox names in subscriptions list.
  # The list is space-separated.
  #imap_client_workarounds = outlook-idle
}

protocol pop3 {
  # Login executable location.
  #login_executable = /usr/libexec/dovecot/pop3-login
  # POP3 executable location. See IMAP's mail_executable above for examples
  # how this could be changed.
  #mail_executable = /usr/libexec/dovecot/pop3
  # Don't try to set mails non-recent or seen with POP3 sessions. This is
  # mostly intended to reduce disk I/O. With maildir it doesn't move files
  # from new/ to cur/, with mbox it doesn't write Status-header.
  #pop3_no_flag_updates = no
  # Support LAST command which exists in old POP3 specs, but has been removed
  # from new ones. Some clients still wish to use this though. Enabling this
  # makes RSET command clear all \Seen flags from messages.
  #pop3_enable_last = no
  # If mail has X-UIDL header, use it as the mail's UIDL.
  #pop3_reuse_xuidl = no
  # Keep the mailbox locked for the entire POP3 session.
  #pop3_lock_session = no
  # POP3 UIDL (unique mail identifier) format to use. You can use following
  # variables:
  #
  #  %v - Mailbox's IMAP UIDVALIDITY
  #  %u - Mail's IMAP UID
  #  %m - MD5 sum of the mailbox headers in hex (mbox only)
  #  %f - filename (maildir only)
  #
  # If you want UIDL compatibility with other POP3 servers, use:
  #  UW's ipop3d         : %08Xv%08Xu
  #  Courier version 0   : %f
  #  Courier version 1   : %u
  #  Courier version 2   : %v-%u
  #  Cyrus (<= 2.1.3)    : %u
  #  Cyrus (>= 2.1.4)    : %v.%u
  #  Older Dovecots      : %v.%u
  #  tpop3d              : %Mf
  #
  # Note that Outlook 2003 seems to have problems with %v.%u format which was
  # Dovecot's default, so if you're building a new server it would be a good
  # idea to change this. %08Xu%08Xv should be pretty fail-safe.
  #
  # NOTE: Nowadays this is required to be set explicitly, since the old
  # default was bad but it couldn't be changed without breaking existing
  # installations. %08Xu%08Xv will be the new default, so use it for new
  # installations.
  #
  pop3_uidl_format = %08Xu%08Xv
  # POP3 logout format string:
  #  %t - number of TOP commands
  #  %p - number of bytes sent to client as a result of TOP command
  #  %r - number of RETR commands
  #  %b - number of bytes sent to client as a result of RETR command
  #  %d - number of deleted messages
  #  %m - number of messages (before deletion)
  #  %s - mailbox size in bytes (before deletion)
  #pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s
  # Support for dynamically loadable plugins. mail_plugins is a space separated
  # list of plugins to load.
  #mail_plugins =
  #mail_plugin_dir = /usr/lib/dovecot/pop3
  # Workarounds for various client bugs:
  #   outlook-no-nuls:
  #     Outlook and Outlook Express hang if mails contain NUL characters.
  #     This setting replaces them with 0x80 character.
  #   oe-ns-eoh:
  #     Outlook Express and Netscape Mail breaks if end of headers-line is
  #     missing. This option simply sends it if it's missing.
  # The list is space-separated.
  #pop3_client_workarounds =
}
protocol lda {
  # Address to use when sending rejection mails.
  postmaster_address = postmaster@example.com
  # Hostname to use in various parts of sent mails, eg. in Message-Id.
  # Default is the system's real hostname.
  #hostname =
  # Support for dynamically loadable plugins. mail_plugins is a space separated
  # list of plugins to load.
  #mail_plugins =
  #mail_plugin_dir = /usr/lib/dovecot/lda
  # Binary to use for sending mails.
  #sendmail_path = /usr/lib/sendmail
  # UNIX socket path to master authentication server to find users.
  #auth_socket_path = /var/run/dovecot/auth-master
}
auth default {
  # Space separated list of wanted authentication mechanisms:
  #   plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi
  mechanisms = plain
  #
  # Password database is used to verify user's password (and nothing more).
  # You can have multiple passdbs and userdbs. This is useful if you want to
  # allow both system users (/etc/passwd) and virtual users to login without
  # duplicating the system users into virtual database.
  #
  # <doc/wiki/PasswordDatabase.txt>
  #
  # By adding master=yes setting inside a passdb you make the passdb a list
  # of "master users", who can log in as anyone else. Unless you're using PAM,
  # you probably still want the destination user to be looked up from passdb
  # that it really exists. This can be done by adding pass=yes setting to the
  # master passdb. <doc/wiki/Authentication.MasterUsers.txt>
  # Users can be temporarily disabled by adding a passdb with deny=yes.
  # If the user is found from that database, authentication will fail.
  # The deny passdb should always be specified before others, so it gets
  # checked first. Here's an example:
  #passdb passwd-file {
    # File contains a list of usernames, one per line
    #args = /etc/dovecot.deny
    #deny = yes
  #}
  # PAM authentication. Preferred nowadays by most systems.
  # Note that PAM can only be used to verify if user's password is correct,
  # so it can't be used as userdb. If you don't want to use a separate user
  # database (passwd usually), you can use static userdb.
  # REMEMBER: You'll need /etc/pam.d/dovecot file created for PAM
  # authentication to actually work. <doc/wiki/PasswordDatabase.PAM.txt>
  passdb pam {
    # [blocking=yes] [session=yes] [setcred=yes]
    # [cache_key=<key>] [<service name>]
    #
    # By default a new process is forked from dovecot-auth for each PAM lookup.
    # Setting blocking=yes uses the alternative way: dovecot-auth worker
    # processes do the PAM lookups.
    #
    # session=yes makes Dovecot open and immediately close PAM session. Some
    # PAM plugins need this to work, such as pam_mkhomedir.
    #
    # setcred=yes makes Dovecot establish PAM credentials if some PAM plugins
    # need that. They aren't ever deleted though, so this isn't enabled by
    # default.
    #
    # cache_key can be used to enable authentication caching for PAM
    # (auth_cache_size also needs to be set). It isn't enabled by default
    # because PAM modules can do all kinds of checks besides checking password,
    # such as checking IP address. Dovecot can't know about these checks
    # without some help. cache_key is simply a list of variables (see
    # doc/wiki/Variables.txt) which must match for the cached data to be used.
    # Here are some examples:
    #   %u - Username must match. Probably sufficient for most uses.
    #   %u%r - Username and remote IP address must match.
    #   %u%s - Username and service (ie. IMAP, POP3) must match.
    #
    # If service name is "*", it means the authenticating service name
    # is used, eg. pop3 or imap (/etc/pam.d/pop3, /etc/pam.d/imap).
    #
    # Some examples:
    #   args = session=yes *
    #   args = cache_key=%u dovecot
    args = "*"
  }
  # /etc/passwd or similar, using getpwnam()
  # In many systems nowadays this uses Name Service Switch, which is
  # configured in /etc/nsswitch.conf. <doc/wiki/AuthDatabase.Passwd.txt>
  #passdb passwd {
    # [blocking=yes] - See userdb passwd for explanation
    #args =
  #}
  # /etc/shadow or similiar, using getspnam(). Deprecated by PAM nowadays.
  # <doc/wiki/PasswordDatabase.Shadow.txt>
  #passdb shadow {
    # [blocking=yes] - See userdb passwd for explanation
    #args =
  #}
  # PAM-like authentication for OpenBSD.
  # <doc/wiki/PasswordDatabase.BSDAuth.txt>
  #passdb bsdauth {
    # [cache_key=<key>] - See cache_key in PAM for explanation.
    #args =
  #}
  # passwd-like file with specified location
  # <doc/wiki/AuthDatabase.PasswdFile.txt>
  #passdb passwd-file {
    # Path for passwd-file
    #args =
  #}
  # checkpassword executable authentication
  # NOTE: You will probably want to use "userdb prefetch" with this.
  # <doc/wiki/PasswordDatabase.CheckPassword.txt>
  #passdb checkpassword {
    # Path for checkpassword binary
    #args =
  #}
  # SQL database <doc/wiki/AuthDatabase.SQL.txt>
  #passdb sql {
    # Path for SQL configuration file, see doc/dovecot-sql-example.conf
    #args = /etc/dovecot-sql.conf
  #}
  # LDAP database <doc/wiki/AuthDatabase.LDAP.txt>
  #passdb ldap {
    # Path for LDAP configuration file, see doc/dovecot-ldap-example.conf
    #args =
  #}
  # vpopmail authentication <doc/wiki/AuthDatabase.VPopMail.txt>
  #passdb vpopmail {
    # [cache_key=<key>] - See cache_key in PAM for explanation.
    #args =
  #}
  #
  # User database specifies where mails are located and what user/group IDs
  # own them. For single-UID configuration use "static".
  #
  # <doc/wiki/UserDatabase.txt>
  #
  # /etc/passwd or similar, using getpwnam(). In many systems nowadays this
  # uses Name Service Switch, which is configured in /etc/nsswitch.conf.
  # <doc/wiki/AuthDatabase.Passwd.txt>
  userdb passwd {
    # [blocking=yes] - By default the lookups are done in the main dovecot-auth
    # process. This setting causes the lookups to be done in auth worker
    # proceses. Useful with remote NSS lookups that may block.
    # NOTE: Be sure to use this setting with nss_ldap or users might get
    # logged in as each others!
    #args =
  }
  # passwd-like file with specified location
  # <doc/wiki/AuthDatabase.PasswdFile.txt>
  #userdb passwd-file {
    # Path for passwd-file
    #args =
  #}
  # static settings generated from template <doc/wiki/UserDatabase.Static.txt>
  #userdb static {
    # Template for the fields. Can return anything a userdb could normally
    # return. For example:
    #
    #  args = uid=500 gid=500 home=/var/mail/%u
    #
    # If you use deliver, it needs to look up users only from the userdb. This
    # of course doesn't work with static because there is no list of users.
    # Normally static userdb handles this by doing a passdb lookup. This works
    # with most passdbs, with PAM being the most notable exception. If you do
    # the user verification another way, you can add allow_all_users=yes to
    # the args in which case the passdb lookup is skipped.
    #
    #args =
  #}
  # SQL database <doc/wiki/AuthDatabase.SQL.txt>
  #userdb sql {
    # Path for SQL configuration file, see doc/dovecot-sql-example.conf
    #args = /etc/dovecot-sql.conf
  #}
  # LDAP database <doc/wiki/AuthDatabase.LDAP.txt>
  #userdb ldap {
    # Path for LDAP configuration file, see doc/dovecot-ldap-example.conf
    #args =
  #}
  # vpopmail <doc/wiki/AuthDatabase.VPopMail.txt>
  #userdb vpopmail {
  #}
  # "prefetch" user database means that the passdb already provided the
  # needed information and there's no need to do a separate userdb lookup.
  # This can be made to work with SQL and LDAP databases, see their example
  # configuration files for more information how to do it.
  # <doc/wiki/UserDatabase.Prefetch.txt>
  #userdb prefetch {
  #}
  # User to use for the process. This user needs access to only user and
  # password databases, nothing else. Only shadow and pam authentication
  # requires roots, so use something else if possible. Note that passwd
  # authentication with BSDs internally accesses shadow files, which also
  # requires roots. Note that this user is NOT used to access mails.
  # That user is specified by userdb above.
  user = root
  # Directory where to chroot the process. Most authentication backends don't
  # work if this is set, and there's no point chrooting if auth_user is root.
  # Note that valid_chroot_dirs isn't needed to use this setting.
  #chroot =
  # Number of authentication processes to create
  #count = 1
  # Require a valid SSL client certificate or the authentication fails.
  #ssl_require_client_cert = no
  # Take the username from client's SSL certificate, using
  # X509_NAME_get_text_by_NID() which returns the subject's DN's
  # CommonName.
  #ssl_username_from_cert = no
  # It's possible to export the authentication interface to other programs:
  #socket listen {
    #master {
      # Master socket provides access to userdb information. It's typically
      # used to give Dovecot's local delivery agent access to userdb so it
      # can find mailbox locations.
      #path = /var/run/dovecot/auth-master
      #mode = 0600
      # Default user/group is the one who started dovecot-auth (root)
      #user =
      #group =
    #}
    #client {
      # The client socket is generally safe to export to everyone. Typical use
      # is to export it to your SMTP server so it can do SMTP AUTH lookups
      # using it.
      #path = /var/run/dovecot/auth-client
      #mode = 0660
    #}
  #}
}
dict {
  #quota = mysql:/etc/dovecot-dict-quota.conf
}
plugin {
  # Here you can give some extra environment variables to mail processes.
  # This is mostly meant for passing parameters to plugins. %variable
  # expansion is done for all values.
  # Quota plugin. Multiple backends are supported:
  #   dirsize: Find and sum all the files found from mail directory.
  #            Extremely SLOW with Maildir. It'll eat your CPU and disk I/O.
  #   dict: Keep quota stored in dictionary (eg. SQL)
  #   maildir: Maildir++ quota
  #   fs: Read-only support for filesystem quota
  #quota = maildir
  # ACL plugin. vfile backend reads ACLs from "dovecot-acl" file from maildir
  # directory. You can also optionally give a global ACL directory path where
  # ACLs are applied to all users' mailboxes. The global ACL directory contains
  # one file for each mailbox, eg. INBOX or sub.mailbox.
  #acl = vfile:/etc/dovecot-acls
  # Convert plugin. If set, specifies the source storage path which is
  # converted to destination storage (mail_location) when the user logs in.
  # The existing mail directory is renamed to <dir>-converted.
  #convert_mail = mbox:%h/mail
  # Skip mailboxes which we can't open successfully instead of aborting.
  #convert_skip_broken_mailboxes = no
  # Trash plugin. When saving a message would make user go over quota, this
  # plugin automatically deletes the oldest mails from configured mailboxes
  # until the message can be saved within quota limits. The configuration file
  # is a text file where each line is in format: <priority> <mailbox name>
  # Mails are first deleted in lowest -> highest priority number order
  #trash = /etc/dovecot-trash.conf
  # Lazy expunge plugin. Currently works only with maildirs. When a user
  # expunges mails, the mails are moved to a mailbox in another namespace
  # (1st). When a mailbox is deleted, the mailbox is moved to another namespace
  # (2nd) as well. Also if the deleted mailbox had any expunged messages,
  # they're moved to a 3rd namespace. The mails won't be counted in quota,
  # and they're not deleted automatically (use a cronjob or something).
  #lazy_expunge = .EXPUNGED/ .DELETED/ .DELETED/.EXPUNGED/
}