[root@localhost ~]# wanrouter stop Shutting down wanpipe1 interface: w1g1 w1g1: unknown interface: No such device Shutting down device: wanpipe1 No devices running, Unloading Modules [root@localhost ~]# wanrouter stopJul 6 16:00:04 localhost kernel: Jul 6 16:00:04 localhost kernel: wanpipe1: Shutting Down! Jul 6 16:00:04 localhost kernel: wanpipe1: T1 Front End unconfigation! Jul 6 16:00:04 localhost kernel: wanpipe1: AFT communications disabled! Jul 6 16:00:04 localhost kernel: wanpipe1: Unregisterd HWEC Jul 6 16:00:04 localhost kernel: wanpipe1: Unregister interface from wanec1 (chip id 1, usage 1)! Jul 6 16:00:04 localhost kernel: wanpipe1: T1 Front End unconfigation! Jul 6 16:00:04 localhost kernel: wanpipe1: Global Chip Shutdown Usage=1 Jul 6 16:00:04 localhost kernel: wanpipe1: Global T1 Front End unconfigation! Jul 6 16:00:04 localhost kernel: wanpipe1: Master shutting down Jul 6 16:00:04 localhost kernel: af_wanpipe: Unregistering Wanpipe API Socket Module Jul 6 16:00:04 localhost kernel: NET: Unregistered protocol family 25 Jul 6 16:00:04 localhost kernel: wanec_remove_dev: Unregistering Wanpipe ECDEV Device! Jul 6 16:00:04 localhost kernel: WANEC Layer: Unloaded Jul 6 16:00:04 localhost kernel: WANPIPE L.I.P: Unloaded Jul 6 16:00:04 localhost kernel: Jul 6 16:00:04 localhost kernel: wanpipe: WANPIPE Modules Unloaded. [root@localhost ~]# [root@localhost ~]# wanrouter start Starting WAN Router... Loading WAN drivers: wanpipe done. Starting up device: wanpipe1 wanconfig: Interface w1g1 setup failed : ioctl(ROUTER_IFNEW,w1g1) failed: : 22 - Invalid argument Wanpipe drivers could not setup network interface Please check /var/log/wanrouter and /var/log/messages for errors Configuring interfaces: w1g1 w1g1: unknown interface: No such device done. Jul 6 16:00:10 localhost kernel: WANPIPE(tm) Hardware Support Module Stable 2.3.4-10 (c) 1994-2007 Sangoma Technologies Inc Jul 6 16:00:10 localhost kernel: WANPIPE(tm) Interface Support Module Stable 2.3.4-10 (c) 1994-2007 Sangoma Technologies Inc Jul 6 16:00:10 localhost kernel: WANPIPE(tm) PPP/Cisco HDLC Protocol Stable 2.3.4-10 (c) 1994-2007 Sangoma Technologies Inc Jul 6 16:00:10 localhost kernel: WANPIPE(tm) Multi-Protocol WAN Driver Module Stable 2.3.4-10 (c) 1994-2007 Sangoma Technologies Inc Jul 6 16:00:10 localhost kernel: wanpipe: Probing for WANPIPE hardware. Jul 6 16:00:10 localhost kernel: wanpipe: AFT-A101-SH T1/E1 card found (HDLC (DS) rev.30), cpu(s) 1, bus #4, slot #4, irq #16 Jul 6 16:00:10 localhost kernel: wanpipe: Allocating maximum 1 devices: wanpipe1 - wanpipe1. Jul 6 16:00:10 localhost kernel: WANPIPE: TDM Codecs Initialized Jul 6 16:00:10 localhost kernel: WANPIPE(tm) Socket API Module Stable 2.3.4-10 (c) 1994-2007 Sangoma Technologies Inc Jul 6 16:00:10 localhost kernel: NET: Registered protocol family 25 Jul 6 16:00:10 localhost kernel: WANPIPE(tm) L.I.P Network Layer Stable 2.3.4-10 (c) 1994-2007 Jul 6 16:00:10 localhost kernel: WanpipeLIP: Protocols: FR PPP CHDLC LIP_ATM Jul 6 16:00:10 localhost kernel: WANPIPE(tm) WANEC Layer Stable 2.3.4.10 (c) 1995-2006 Sangoma Technologies Inc. Jul 6 16:00:10 localhost kernel: wanec_create_dev: Registering Wanpipe ECDEV Device! Jul 6 16:00:10 localhost kernel: wanpipe1: Starting WAN Setup Jul 6 16:00:10 localhost kernel: Jul 6 16:00:10 localhost kernel: Processing WAN device wanpipe1... Jul 6 16:00:10 localhost kernel: wanpipe1: Locating: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=4 Jul 6 16:00:10 localhost kernel: wanpipe1: Found: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=4, Port=0 Jul 6 16:00:10 localhost kernel: wanpipe1: AFT PCI memory at 0xEFCF8000 Jul 6 16:00:10 localhost kernel: wanpipe1: IRQ 16 allocated to the AFT PCI card Jul 6 16:00:10 localhost kernel: wanpipe1: Starting AFT Quad Hardware Init. Jul 6 16:00:10 localhost kernel: wanpipe1: Enabling front end link monitor Jul 6 16:00:10 localhost kernel: wanpipe1: Global Chip Configuration: used=1 Jul 6 16:00:10 localhost kernel: wanpipe1: Global EC Clock Port = 1 Jul 6 16:00:10 localhost kernel: wanpipe1: Global E1 Front End configuration Jul 6 16:00:10 localhost kernel: wanpipe1: AFT Data Mux Bit Map: 0x01234567 Jul 6 16:00:10 localhost kernel: wanpipe1: Configuring DS DS26521 E1 FE Jul 6 16:00:10 localhost kernel: wanpipe1: Port 1,HDB3,CRC4,120OH Jul 6 16:00:10 localhost kernel: wanpipe1: Clk Normal:0, Ch FFFFFFFFFFFFFFFF Jul 6 16:00:10 localhost kernel: wanpipe1: Sig Mode CCS Jul 6 16:00:10 localhost kernel: wanpipe1: E1:1: Disable channels: Jul 6 16:00:10 localhost kernel: wanpipe1: Front end successful Jul 6 16:00:10 localhost kernel: wanpipe1: Front End Interface Ready 0x40000000 Jul 6 16:00:10 localhost kernel: wanpipe1: Register EC interface wanec1 (usage 1, max ec chans 32)! Jul 6 16:00:10 localhost kernel: wanpipe1: Configuring Device :wanpipe1 FrmVr=30 Jul 6 16:00:10 localhost kernel: wanpipe1: Global MTU = 1500 Jul 6 16:00:10 localhost kernel: wanpipe1: Global MRU = 1500 Jul 6 16:00:10 localhost kernel: wanpipe1: Data Mux Map = 0x01234567 Jul 6 16:00:10 localhost kernel: wanpipe1: Rx CRC Bytes = 0 Jul 6 16:00:10 localhost kernel: wanpipe1: Global TDM Int = Disabled Jul 6 16:00:10 localhost kernel: wanpipe1: Global TDM Ring= Disabled Jul 6 16:00:10 localhost kernel: wanpipe1: TDMV Span = 1 : Enabled Jul 6 16:00:10 localhost kernel: wanpipe1: Configuring Interface: w1g1 Jul 6 16:00:10 localhost kernel: Jul 6 16:00:10 localhost kernel: wanpipe1:w1g1: Error: TDM VOICE prot not compiled Jul 6 16:00:10 localhost kernel: wanpipe1:w1g1: during installation process! Zaptel Version: 1.4.3 Echo Canceller: MG2 Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Slaves: 01) Channel 02: Clear channel (Default) (Slaves: 02) Channel 03: Clear channel (Default) (Slaves: 03) Channel 04: Clear channel (Default) (Slaves: 04) Channel 05: Clear channel (Default) (Slaves: 05) Channel 06: Clear channel (Default) (Slaves: 06) Channel 07: Clear channel (Default) (Slaves: 07) Channel 08: Clear channel (Default) (Slaves: 08) Channel 09: Clear channel (Default) (Slaves: 09) Channel 10: Clear channel (Default) (Slaves: 10) Channel 11: Clear channel (Default) (Slaves: 11) Channel 12: Clear channel (Default) (Slaves: 12) Channel 13: Clear channel (Default) (Slaves: 13) Channel 14: Clear channel (Default) (Slaves: 14) Channel 15: Clear channel (Default) (Slaves: 15) Channel 16: Clear channel (Default) (Slaves: 16) Channel 17: Clear channel (Default) (Slaves: 17) Channel 18: Clear channel (Default) (Slaves: 18) Channel 19: Clear channel (Default) (Slaves: 19) Channel 20: Clear channel (Default) (Slaves: 20) Channel 21: Clear channel (Default) (Slaves: 21) Channel 22: Clear channel (Default) (Slaves: 22) Channel 23: Clear channel (Default) (Slaves: 23) Channel 24: D-channel (Default) (Slaves: 24) 24 channels configured. ZT_SPANCONFIG failed on span 1: No such device or address (6) [root@localhost ~]# Jul 6 16:00:11 localhost kernel: wanpipe1: E1 disconnected!