[trunkgroups] [channels] context=default switchtype=national signalling=fxo_ls rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=512 echocancelwhenbridged=yes rxgain=5.0 txgain=10.0 group=1 callgroup=1 pickupgroup=1 immediate=no signalling = fxs_ks channel => 1,2,3,4,5,6,7,8 =================== Digium TDM808 (8x FXO) with HPEC installed Zaptel 1.4.3 Asterisk 1.4.5 =================== local side: x-lite 3.0 (build 41150) running on a 500MHz P3 with 512MB RAM on Windows 2000 connecting to external asterisk machine (NAT-ed) remote side: regular cell phone with excellent coverage (calls to non-asterisk line are OK) ================== # dmesg Linux version 2.6.19.7-0.4.gcc3.4.x86.i686 (conary.rpath.com@rpl:1) (gcc version 3.4.4) #1 Tue May 1 13:00:52 EDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) BIOS-e820: 000000001ff70000 - 000000001ff7a000 (ACPI data) BIOS-e820: 000000001ff7a000 - 000000001ff80000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. found SMP MP-table at 000f6200 Entering add_active_range(0, 0, 130928) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 130928 HighMem 130928 -> 130928 early_node_map[1] active PFN ranges 0: 0 -> 130928 On node 0 totalpages: 130928 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 990 pages used for memmap Normal zone: 125842 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI present. Using APIC driver default ACPI: RSDP (v000 PTLTD ) @ 0x000f6230 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1ff74ef0 ACPI: FADT (v001 INTEL CANTWOOD 0x06040000 PTL 0x00000003) @ 0x1ff79eae ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x1ff79f22 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1ff79f72 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1ff79fd8 ACPI: DSDT (v001 INTEL CANTWOOD 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24]) IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Detected 2600.613 MHz processor. Built 1 zonelists. Total pages: 129906 Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.19.7-0.4.gcc3.4.x86.i686 ro root=LABEL=/1 quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec10000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 514132k/523712k available (2007k kernel code, 9000k reserved, 798k data, 192k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xdff70000 ( 511 MB) .init : 0xc03c0000 - 0xc03f0000 ( 192 kB) .data : 0xc02f5e89 - 0xc03bd9f4 ( 798 kB) .text : 0xc0100000 - 0xc02f5e89 (2007 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5204.89 BogoMIPS (lpj=10409794) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel(R) Celeron(R) CPU 2.60GHz stepping 09 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking if image is initramfs... it is Freeing initrd memory: 1059k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd905, last bus=4 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:04:03.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLTA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 11 14 15) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *9 ACPI: PCI Interrupt Link [LNKD] (IRQs *3 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 *11 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: e8100000-e81fffff PREFETCH window: 30000000-300fffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: e8200000-e9ffffff PREFETCH window: 30100000-301fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1183993303.632:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: CPU0 (power states: C1[C1] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel i875 Chipset. agpgart: AGP aperture is 128M @ 0xf0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 18 (level, low) -> IRQ 16 0000:04:05.0: ttyS1 at I/O 0x3430 (irq = 16) is a 16550A 0000:04:05.0: ttyS2 at I/O 0x3428 (irq = 16) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: Maxtor 32305U3, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 45023328 sectors (23051 MB) w/512KiB Cache, CHS=44666/16/63, UDMA(66) hda: cache flushes not supported hda: hda1 hda2 hda3 hdc: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Time: tsc clocksource has been installed. ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 192k freed input: AT Translated Set 2 keyboard as /class/input/input0 SCSI subsystem initialized libata version 2.00 loaded. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 tg3.c:v3.69 (November 15, 2006) ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 17 (level, low) -> IRQ 17 eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:85:c5:0c:60 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[763f0000] dma_mask[64-bit] 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 24 (level, low) -> IRQ 18 eth1: RealTek RTL8139 at 0x2400, 00:0e:2e:30:87:49, IRQ 18 eth1: Identified 8139 chip type 'RTL-8100B/8139D' Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.4.3 Zaptel Echo Canceller: Digium High-Performance Echo Canceller Digium High-Performance Echo Canceller, version 9.00.003 Optimized for "i586" CPU architecture Coypright (C) 2006-2007 Digium, Inc. and Adaptive Digital Technologies, Inc. This module is supplied under a commercial license granted by Digium, Inc. Please see the full license text supplied by the accompanying "register" utility, or ask for a copy from Digium. ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 25 (level, low) -> IRQ 19 PCI Config reg is 02900317 Wildcard TDM800P: New Reg: fe590000! Detected REG0: 00000100 Detected REG1: 00007849 Detected REG2: 0000001d (pre) Reg fc is 50000027 (post) Reg fc is 50000024 Detected REG2: 0000ffff wctdm24xxp: reg is a04c0004 Resetting the modules... During Resetting the modules... After resetting the modules... Port 1: Installed -- AUTO FXO (FCC mode) Port 2: Installed -- AUTO FXO (FCC mode) Port 3: Installed -- AUTO FXO (FCC mode) Port 4: Installed -- AUTO FXO (FCC mode) Port 5: Installed -- AUTO FXO (FCC mode) Port 6: Installed -- AUTO FXO (FCC mode) Port 7: Installed -- AUTO FXO (FCC mode) Port 8: Installed -- AUTO FXO (FCC mode) VPM: Not Present Found a Wildcard TDM: Wildcard TDM800P (8 modules) ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 intel_rng: FWH not detected i6300ESB timer: initialized (0xe082e000). heartbeat=30 sec (nowayout=0) EDAC MC: Ver: 2.0.1 May 1 2007 EDAC i82875p: i82875p init one EDAC MC0: Giving out device to i82875p_edac i82875p: DEV 0000:00:00.0 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8000400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001420 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] Using specific hotkey driver ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com EXT3 FS on hda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1044216k swap on /dev/hda3. Priority:-1 extents:1 across:1044216k PM: Writing back config space on device 0000:04:04.0 at offset b (was 165314e4, writing 1654103c) PM: Writing back config space on device 0000:04:04.0 at offset 3 (was 0, writing 2008) PM: Writing back config space on device 0000:04:04.0 at offset 2 (was 2000000, writing 2000003) PM: Writing back config space on device 0000:04:04.0 at offset 1 (was 2b00000, writing 2b00106) PM: Writing back config space on device 0000:04:04.0 at offset 0 (was 165314e4, writing 165414e4) PM: Writing back config space on device 0000:04:04.0 at offset b (was 165314e4, writing 1654103c) PM: Writing back config space on device 0000:04:04.0 at offset 3 (was 0, writing 2008) PM: Writing back config space on device 0000:04:04.0 at offset 2 (was 2000000, writing 2000003) PM: Writing back config space on device 0000:04:04.0 at offset 1 (was 2b00000, writing 2b00106) PM: Writing back config space on device 0000:04:04.0 at offset 0 (was 165314e4, writing 165414e4) eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 Registered Tormenta2 PCI usbcore: registered new interface driver wcusb Wildcard USB FXS Interface driver registered Registered tone zone 0 (United States / North America) hpec_license_check: License granted for 8 channels NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 eth1: no IPv6 routers present Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period Zaptel Transcoder support loaded =================== CPU0 0: 164046 IO-APIC-edge timer 1: 8 IO-APIC-edge i8042 6: 5 IO-APIC-edge floppy 8: 1 IO-APIC-edge rtc 9: 1 IO-APIC-fasteoi acpi 12: 112 IO-APIC-edge i8042 14: 6735 IO-APIC-edge ide0 15: 22 IO-APIC-edge ide1 18: 5844 IO-APIC-fasteoi eth1 19: 647758 IO-APIC-fasteoi Wildcard TDM800P 20: 0 IO-APIC-fasteoi ehci_hcd:usb1 21: 0 IO-APIC-fasteoi uhci_hcd:usb2 22: 0 IO-APIC-fasteoi uhci_hcd:usb3 NMI: 0 LOC: 164010 ERR: 0 MIS: 0