# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	Fontpath	"/usr/share/X11/fonts/misc"
	Fontpath	"/usr/share/X11/fonts/cyrillic"
	Fontpath	"/usr/share/X11/fonts/100dpi/:unscaled"
	Fontpath	"/usr/share/X11/fonts/75dpi/:unscaled"
	Fontpath	"/usr/share/X11/fonts/Type1"
	Fontpath	"/usr/share/X11/fonts/100dpi"
	Fontpath	"/usr/share/X11/fonts/75dpi"
	Fontpath	"/usr/share/fonts/X11/misc"
	# path to defoma fonts
	Fontpath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load		"i2c"
	Load		"bitmap"
	Load		"ddc"
	Load		"dri"
	Load		"extmod"
	Load		"freetype"
	Load		"glx"
	Load		"int10"
	Load		"type1"
	Load		"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"se"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ExplorerPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"	"/dev/psaux"
	Option		"Protocol"	"auto-dev"
	Option		"HorizScrollDelta"	"0"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
	# /dev/input/event
	# for USB
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
	# /dev/input/event
	# for USB
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/wacom"# Change to 
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
	# /dev/input/event
	# for USB
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
	Driver		"radeon"
	Busid		"PCI:1:0:0"
	Option          "XAANoOffscreenPixmaps"
        Option "AGPMode" "4"
        Option "AGPFastWrite" "true"
        Option "DisableGLXRootClipping" "true"
        Option "AddARGBGLXVisuals" "true"
        Option "AllowGLXWithComposite" "true"
        Option "EnablePageFlip" "true"
	Option "MergedFB" "true" #Enable MergedFB function
	Option "MonitorLayout" "LVDS (TMDS), CRT" # LVDS = Laptop Screen, TMDS = DVI Port, CRT = VGA Port NOT MONITOR TYPE!
	Option "CRT2Hsync" "30-65" #Horizontal Sync of the Monitor (check your monitor's manual for correct values)
	Option "CRT2VRefresh" "50-75" #Vertical Refresh rate of the Monitor (check your monitor's manual for correct values)
	Option "OverlayOnCRTC2" "true"
	Option "CRT2Position" "LeftOf" #Physical location of your secondary monitor in relationship to your primary monitor. Values can be: LeftOf, RightOf, Above, Below, and Clone.
	Option "MetaModes" "1280x1024-1280x1024" #Monitor Resolutions for Primary-Secondary monitors 
	#Option "MergedXineramaCRT2IsScreen0" "true" #determines which screen is going to be the primary screen; value can be "true" or "false"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
	Horizsync    28-64 #You may wish to change the values to fit your specific monitor
	Vertrefresh    43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
	Monitor		"Generic Monitor"
	Defaultdepth	24
	SubSection "Display"
		Depth	1
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth	4
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth	8
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth	15
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth	16
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes		"1024x768"
	EndSubSection
EndSection

Section "ServerLayout"
	Option		"AIGLX"	"true"
	Identifier	"Default Layout"
  screen "Default Screen"
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	Inputdevice	"stylus"	"SendCoreEvents"
	Inputdevice	"cursor"	"SendCoreEvents"
	Inputdevice	"eraser"	"SendCoreEvents"
	Inputdevice	"Synaptics Touchpad"
EndSection

Section "DRI"
	Mode	0666
EndSection

Section "Extensions"
	Option		"Composite"	"Enable"
EndSection