OPM { /* * Blacklist zones to check IPs against. If you would rather not * trust a remotely managed blacklist, you could set up your own, or * you could comment this out in which case every user will be * scanned. * * If you DO intend to send reports, please contact us first at * opm-bopm@blitzed.org and let us know what you have set for * "dnsbl_from" and your server name (or network name if you're * reporting for a whole network). Until you do, all reports will be * bounced. * * Those who report should subscribe to the opm-announce mailing list. * This is an extremely low volume read-only mailing list that we use * to inform our reporters about important details relating to our * DNSBL. You can subscribe from: * * http://lists.blitzed.org/listinfo/opm-announce * * You may also be interested in opm-talk. That list is for user * discussion of our DNSBL service, feature requests etc.. Weekly * stats about our DNSBL such as how many addresses are in it, who * reports the most, etc. are also posted there. You can subscribe * from: * * http://lists.blitzed.org/listinfo/opm-talk */ blacklist { /* The DNS name of the blacklist */ name = "opm.blitzed.org"; /* * There are only two values that are valid for this * "A record bitmask" and "A record reply" * These options affect how the values specified to reply * below will be interpreted, a bitmask is where the reply * values are 2^n and more than one is added up, a reply is * simply where the last octet of the IP is that number. * If you are not sure then the values set for opm.blitzed.org * will work without any changes. */ type = "A record bitmask"; /* Kline types not set in the proxy types below, we might add * other proxy types in the future, unless you want to exclude * specific types of proxies it is recommended you leave this set. * For DNSBLs that do not contain just open proxies this must be * disabled (opm.blitzed.org is just an open proxy blacklist). */ ban_unknown = yes; /* The actual values returned by the opm.blitzed.org blacklist * As documented at http://opm.blitzed.org/info */ reply { 1 = "WinGate"; 2 = "Socks"; 4 = "HTTP"; 8 = "Router"; 16 = "HTTP POST"; }; /* The kline message sent for this specific blacklist, remember to put * the removal method in this. * By default this is commented out the KLINE command in the IRC * block is used */ # kline = "KLINE *@%h :Open proxy found on your host, please visit www.blitzed.org/proxy?ip=%i"; }; /* * You can specify multiple DNSBLs. Some people see "opm.blitzed.org" * and mindlessly change the "blitzed.org" part to be their own * domain. Please don't do this unless you really do run your own * DNSBL, all you will accomplish is filling your channels with DNS * error messages. opm.blitzed.org should be adequate for most * people. */ /* example: NJABL - please read http://www.njabl.org/use.html before * uncommenting */ blacklist { name = "dnsbl.njabl.org"; type = "A record reply"; reply { 9 = "Open proxy"; }; ban_unknown = no; kline = "KLINE *@%h :Open proxy found on your host, please visit www.njabl.org/cgi-bin/lookup.cgi?query=%i"; }; blacklist { name = "rbl.efnet.org"; type = "A record reply"; ban_unknown = no; reply { 1 = "Open Proxy"; 2 = "spamtrap666"; 3 = "spamtrap50"; 4 = "TOR"; 5 = "Drones / Flooding"; }; kline = "KLINE 1440 *@%h :Blacklisted Proxy found. Visit http://rbl.efnet.org/?i=%i for info."; }; blacklist { name = "tor.efnet.org"; type = "A record reply"; ban_unknown = no; reply { 1 = "TOR"; }; kline = "KLINE 1440 *@%h :TOR exit node found. Visit http://rbl.efnet.org/?i=%i for info."; }; blacklist { name = "ircbl.ahbl.org"; type = "A record reply"; ban_unknown = yes; reply { 2 = "Open proxy"; }; kline = "KLINE 1440 *@%i :DNSBL listed. Check ircnet.com/cgi-bin/bl.cgi?ip=%i for removal."; }; blacklist { name = "cbl.abuseat.org"; type = "A record reply"; reply { 2 = "Open proxy"; }; ban_unknown = no; kline = "KLINE 1440 *@%i :DNSBL listed. Check ircnet.com/cgi-bin/bl.cgi?ip=%i for removal."; }; blacklist { name = "tor.dnsbl.sectoor.de"; type = "A record reply"; reply { 1 = "Tor exit server"; }; ban_unknown = no; kline = "KLINE 1440 *@%i :Tor exit server detected. Visit www.sectoor.de/tor.php?ip=%i for info."; }; blacklist { name = "tor.kewlio.net.uk"; type = "A record reply"; reply { 100 = "Tor exit server"; }; ban_unknown = no; kline = "KLINE 1440 *@%i :Tor exit server detected."; }; blacklist { name = "tor.ahbl.org"; type = "A record reply"; reply { 2 = "Tor exit server"; }; ban_unknown = no; kline = "KLINE 1440 *@%i :Tor exit server detected."; }; /* * You can report the insecure proxies you find to our DNSBL also! * The remaining directives in this section are only needed if you * intend to do this. Reports are sent by email, one email per IP * address. The format does support multiple addresses in one email, * but we don't know of any servers that are detecting enough insecure * proxies for this to be really necessary. */ /* * Email address to send reports FROM. If you intend to send reports, * please pick an email address that we can actually send mail to * should we ever need to contact you. */ # dnsbl_from = "Blair_Sooley@HotMail.Com"; /* * Email address to send reports TO. */ # dnsbl_to = "bopm@reports.blitzed.org"; /* * Full path to your sendmail binary. Even if your system does not * use sendmail, it probably does have a binary called "sendmail" * present in /usr/sbin or /usr/lib. If you don't set this, no * proxies will be reported. */ # sendmail = "/usr/sbin/sendmail"; }; /* * The short explanation: * * This is where you define what ports/protocols to check for. You can have * multiple scanner blocks and then choose which users will get scanned by * which scanners further down. * * The long explanation: * * Scanner defines a virtual scanner. For each user being scanned, a scanner * will use a file descriptor (and subsequent connection) for each protocol. * Once connecting it will negotiate the proxy to connect to * target_ip:target_port (target_ip MUST be an IP). * * Once connected, any data passed through the proxy will be checked to see if * target_string is contained within that data. If it is the proxy is * considered open. If the connection is closed at any point before * target_string is matched, or if at least max_read bytes are read from the * connection, the negotiation is considered failed. */ scanner { /* * Unique name of this scanner. This is used further down in the * user {} blocks to decide which users get affected by which * scanners. */ name="default"; /* * HTTP CONNECT - very common proxy protocol supported by widely known * software such as Squid and Apache. The most common sort of * insecure proxy and found on a multitude of weird ports too. Offers * transparent two way TCP connections. */ protocol = HTTP:80; protocol = HTTP:8080; protocol = HTTP:3128; protocol = HTTP:6588; /* * SOCKS4/5 - well known proxy protocols, probably the second most * common for insecure proxies, also offers transparent two way TCP * connections. Fortunately largely confined to port 1080. */ protocol = SOCKS4:1080; protocol = SOCKS5:1080; protocol = SOCKS4:25552; protocol = SOCKS4:14237; protocol = SOCKS4:17327; protocol = SOCKS4:29991; protocol = SOCKS4:12678; protocol = SOCKS4:38883; protocol = SOCKS5:25552; protocol = SOCKS5:14237; protocol = SOCKS5:17327; protocol = SOCKS5:29991; protocol = SOCKS5:12678; protocol = SOCKS5:38883; protocol = ROUTER:23; protocol = SOCKS4:559; protocol = HTTPPOST:3128; protocol = SOCKS4:1080; protocol = HTTP:8080; protocol = SOCKS5:1182; protocol = HTTP:3128; protocol = HTTPPOST:8080; protocol = SOCKS4:9999; protocol = HTTPPOST:80; protocol = SOCKS5:1080; protocol = HTTP:63000; protocol = HTTP:8000; protocol = HTTPPOST:808; protocol = HTTP:80; protocol = HTTPPOST:6588; protocol = HTTP:6588; protocol = SOCKS5:3128; protocol = SOCKS5:10080; protocol = HTTPPOST:4480; protocol = SOCKS4:6664; protocol = SOCKS4:63808; protocol = HTTP:6667; protocol = SOCKS4:19991; protocol = SOCKS4:1098; protocol = SOCKS4:10000; protocol = SOCKS4:4471; protocol = HTTP:65506; protocol = HTTP:63809; protocol = SOCKS5:9090; protocol = HTTP:9090; protocol = HTTP:6668; protocol = SOCKS4:58; protocol = SOCKS5:58; protocol = SOCKS4:6969; protocol = WINGATE:23; protocol = SOCKS5:3380; protocol = SOCKS4:40; protocol = SOCKS5:443; protocol = SOCKS4:8888; protocol = HTTPPOST:9090; protocol = HTTP:5490; protocol = SOCKS4:8080; protocol = SOCKS5:6969; protocol = SOCKS4:1026; protocol = SOCKS4:1025; protocol = HTTP:8888; protocol = HTTP:6669; protocol = HTTP:8090; protocol = HTTP:808; protocol = SOCKS5:1029; protocol = SOCKS4:41080; protocol = SOCKS5:8020; protocol = SOCKS5:6000; protocol = HTTPPOST:8081; protocol = HTTP:4480; protocol = SOCKS5:1027; protocol = SOCKS4:1028; protocol = HTTP:3332; protocol = SOCKS5:8888; protocol = SOCKS5:1028; protocol = SOCKS4:3330; protocol = SOCKS4:29992; protocol = SOCKS4:1234; protocol = SOCKS4:1029; protocol = HTTP:5000; protocol = HTTP:443; protocol = SOCKS5:1813; protocol = SOCKS5:1081; protocol = SOCKS5:1026; protocol = SOCKS4:1337; protocol = SOCKS4:1050; protocol = HTTP:1080; protocol = SOCKS5:9999; protocol = SOCKS5:9100; protocol = SOCKS5:19991; protocol = SOCKS5:1098; protocol = SOCKS4:9100; protocol = SOCKS4:7080; protocol = SOCKS4:1033; protocol = HTTP:9000; protocol = HTTP:5800; protocol = HTTP:5634; protocol = HTTP:4471; protocol = HTTP:3382; protocol = SOCKS5:1200; protocol = SOCKS5:1039; protocol = SOCKS5:1025; protocol = SOCKS4:8002; protocol = SOCKS4:6748; protocol = SOCKS4:44548; protocol = SOCKS4:3380; protocol = SOCKS4:32167; protocol = SOCKS4:2000; protocol = SOCKS4:1979; protocol = SOCKS4:12654; protocol = SOCKS4:11225; protocol = SOCKS4:1066; protocol = SOCKS4:1030; protocol = SOCKS4:1027; protocol = SOCKS4:10099; protocol = HTTP:81; protocol = HTTP:6665; protocol = HTTP:6664; protocol = HTTP:6663; protocol = SOCKS5:8278; protocol = SOCKS5:6748; protocol = SOCKS5:4914; protocol = SOCKS5:4471; protocol = SOCKS5:29992; protocol = SOCKS5:17235; protocol = SOCKS5:1234; protocol = SOCKS5:1202; protocol = SOCKS5:1180; protocol = SOCKS5:1075; protocol = SOCKS5:1033; protocol = SOCKS5:10000; protocol = SOCKS4:8020; protocol = SOCKS4:4044; protocol = SOCKS4:3128; protocol = SOCKS4:3127; protocol = SOCKS4:28882; protocol = SOCKS4:24973; protocol = SOCKS4:21421; protocol = SOCKS4:1182; protocol = SOCKS4:1032; protocol = SOCKS4:10242; protocol = HTTPPOST:8089; protocol = HTTP:8082; protocol = HTTP:6661; protocol = HTTP:35233; protocol = HTTP:19991; protocol = HTTP:1098; protocol = HTTP:1050; protocol = SOCKS5:9988; protocol = SOCKS5:8080; protocol = SOCKS5:8009; protocol = SOCKS5:6561; protocol = SOCKS5:24971; protocol = SOCKS5:18844; protocol = SOCKS5:1122; protocol = SOCKS5:10777; protocol = SOCKS5:1030; protocol = SOCKS5:10130; protocol = SOCKS5:10099; protocol = SOCKS4:8751; protocol = SOCKS4:8278; protocol = SOCKS4:8111; protocol = SOCKS4:7007; protocol = SOCKS4:6551; protocol = SOCKS4:5353; protocol = SOCKS4:443; protocol = SOCKS4:43341; protocol = SOCKS4:3801; protocol = SOCKS4:2280; protocol = SOCKS4:1978; protocol = SOCKS4:1212; protocol = SOCKS4:1039; protocol = SOCKS4:1031; protocol = HTTPPOST:81; protocol = HTTP:9988; protocol = HTTP:7868; protocol = HTTP:7070; protocol = HTTP:444; protocol = HTTP:1200; protocol = HTTP:1039; /* * Cisco routers with a default password (yes, it really does happen). * Also pretty much anything else that will let you telnet to anywhere * else on the internet. Fortunately these are always on port 23. */ protocol = ROUTER:23; /* * WinGate is commercial windows proxy software which is now not so * common, but still to be found, and helpfully presents an interface * that can be used to telnet out, on port 23. */ protocol = WINGATE:23; /* * The HTTP POST protocol, often dismissed when writing the access * controls for proxies, but sadly can still be used to abused. * Offers only the opportunity to send a single block of data, but * enough of them at once can still make for a devastating flood. * Found on the same ports that HTTP CONNECT proxies inhabit. * * Note that if your ircd has "ping cookies" then clients from HTTP * POST proxies cannot actually ever get onto your network anyway. If * you leave the checks in then you'll still find some (because some * people IRC from boxes that run them), but if you use BOPM purely as * a protective measure and you have ping cookies, you need not scan * for HTTP POST. */ protocol = HTTPPOST:80; /* * IP this scanner will bind to. Use this if you need your scans to * come FROM a particular interface on the machine you run BOPM from. * If you don't understand what this means, please leave this * commented out, as this is a major source of support queries! */ # vhost = "127.0.0.1"; /* Maximum file descriptors this scanner can use. Remember that there * will be one FD for each protocol listed above. As this example * scanner has 8 protocols, it requires 8 FDs per user. With a 512 FD * limit, this scanner can be used on 64 users _at the same time_. * That should be adequate for most servers. */ fd = 512; /* * Maximum data read from a proxy before considering it closed. Don't * set this too high, some people have fun setting up lots of ports * that send endless data to tie up your scanner. 4KB is plenty for * any known proxy. */ max_read = 4096; /* * Amount of time (in seconds) before a test is considered timed out. * Again, all but the poorest slowest proxies will be detected within * 30 seconds, and this helps keep resource usage low. */ timeout = 30;