Linux version 2.6.22.1-smp (root@despair) (gcc version 4.1.2) #1 SMP Thu Jul 12 18:32:36 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f670000 (usable) BIOS-e820: 000000003f670000 - 000000003f67e000 (ACPI data) BIOS-e820: 000000003f67e000 - 000000003f700000 (ACPI NVS) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6480 Entering add_active_range(0, 0, 259696) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 259696 early_node_map[1] active PFN ranges 0: 0 -> 259696 On node 0 totalpages: 259696 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 236 pages used for memmap HighMem zone: 30084 pages, LIFO batch:7 DMI present. ACPI: RSDP 000F63B0, 0014 (r0 PTLTD ) ACPI: RSDT 3F6764D1, 0048 (r1 Sony N0 20060710 PTL 0) ACPI: FACP 3F67DDDE, 0084 (r2 Sony N0 20060710 PTL 5A) ACPI: DSDT 3F677E33, 5FAB (r1 Sony N0 20060710 PTL 100000E) ACPI: FACS 3F67EFC0, 0040 ACPI: APIC 3F67DE62, 0068 (r1 Sony N0 20060710 PTL 5A) ACPI: BOOT 3F67DFD8, 0028 (r1 Sony N0 20060710 PTL 1) ACPI: MCFG 3F67DF02, 003C (r1 Sony N0 20060710 PTL 5A) ACPI: TCPA 3F67DF3E, 0032 (r1 Sony N0 20060710 PTL 5A52) ACPI: APIC 3F67DF70, 0068 (r1 Sony N0 20060710 PTL 0) ACPI: SSDT 3F6776B1, 077E (r1 Sony N0 20060710 PTL 20050624) ACPI: SSDT 3F676EE6, 07CB (r1 Sony N0 20060710 PTL 20050624) ACPI: SSDT 3F676519, 04E2 (r1 Sony N0 20060710 PTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Built 1 zonelists. Total pages: 257668 Kernel command line: root=/dev/sda2 ro vga=869 resume2=swap:/dev/sda3 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1833.598 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1024792k/1038784k available (2487k kernel code, 13384k reserved, 1077k data, 236k init, 121280k highmem) virtual kernel memory layout: fixmap : 0xffe17000 - 0xfffff000 (1952 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0482000 - 0xc04bd000 ( 236 kB) .data : 0xc036dce5 - 0xc047b224 (1077 kB) .text : 0xc0100000 - 0xc036dce5 (2487 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3671.87 BogoMIPS (lpj=7343740) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 15754.59 BogoMIPS (lpj=31509180) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 Total of 2 processors activated (19426.46 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs migration_cost=71 Device driver platform lacks bus and class support for being resumed. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: System BIOS is requesting _OSI(Linux) ACPI: Please test with "acpi_osi=!Linux" Please send dmidecode to linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Device driver pci0000:00 lacks bus and class support for being resumed. PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #0a (-#0d) is hidden behind transparent bridge #09 (-#0a) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs *10) ACPI: PCI Interrupt Link [LNKC] (IRQs *10) ACPI: PCI Interrupt Link [LNKD] (IRQs *10) ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *10) ACPI: PCI Interrupt Link [LNKG] (IRQs *10) ACPI: PCI Interrupt Link [LNKH] (IRQs *10) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init Device driver pnp0 lacks bus and class support for being resumed. ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.21 loaded. usbcore: registered new interface driver usbfs USB driver usbfs lacks resume support. usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report ACPI: RTC can wake from S4 pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 16 Device driver fw-host0 lacks bus and class support for being resumed. Time: tsc clocksource has been installed. ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[dc005000-dc0057ff] Max Packet=[2048] IR/IT contexts=[4/8] PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: d6000000-d7ffffff PREFETCH window: d0000000-d1ffffff PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: dc100000-dc1fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: 3000-3fff MEM window: d8000000-d9ffffff PREFETCH window: d2000000-d3ffffff PCI: Bridge: 0000:00:1c.3 IO window: 4000-4fff MEM window: da000000-dbffffff PREFETCH window: d4000000-d5ffffff PCI: Bus 10, cardbus bridge: 0000:09:04.0 IO window: 00005000-000050ff IO window: 00005400-000054ff PREFETCH window: 50000000-53ffffff MEM window: 54000000-57ffffff PCI: Bridge: 0000:00:1e.0 IO window: 5000-5fff MEM window: dc000000-dc0fffff PREFETCH window: 50000000-53ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 21 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x37 set to 0x1 highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 7872k, total 7872k vesafb: mode is 1280x800x32, linelength=5120, pages=0 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 160x50 fb0: VESA VGA frame buffer device Device driver pnp1 lacks bus and class support for being resumed. isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 1 isapnp: No Plug & Play device found Switched to high resolution mode on CPU 0 Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Device driver isa lacks bus and class support for being resumed. Device driver 08004603021ce119 lacks bus and class support for being resumed. ieee1394: Host added: ID:BUS[0-00:1023] GUID[08004603021ce119] floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: module loaded Device driver lo lacks bus and class support for being resumed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 22 ICH7: chipset revision 2 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: MATSHITAUJ-832D, ATAPI CD/DVD-ROM drive Device driver ide0 lacks bus and class support for being resumed. hda: selected mode 0x42 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 PCI driver AEC62xx_IDE lacks driver specific resume support. PCI driver ALI15x3_IDE lacks driver specific resume support. PCI driver AMD_IDE lacks driver specific resume support. PCI driver ATIIXP_IDE lacks driver specific resume support. PCI driver CMD64x_IDE lacks driver specific resume support. PCI driver Cyrix_IDE lacks driver specific resume support. PCI driver CS5530 IDE lacks driver specific resume support. PCI driver CS5535_IDE lacks driver specific resume support. PCI driver Cypress_IDE lacks driver specific resume support. PCI driver HPT34x_IDE lacks driver specific resume support. PCI driver HPT366_IDE lacks driver specific resume support. PCI driver ITE8213_IDE lacks driver specific resume support. PCI driver ITE821x IDE lacks driver specific resume support. PCI driver JMicron IDE lacks driver specific resume support. PCI driver Promise_Old_IDE lacks driver specific resume support. PCI driver Promise_IDE lacks driver specific resume support. PCI driver PIIX_IDE lacks driver specific resume support. PCI driver RZ1000_IDE lacks driver specific resume support. PCI driver Serverworks_IDE lacks driver specific resume support. PCI driver SiI_IDE lacks driver specific resume support. PCI driver SIS_IDE lacks driver specific resume support. PCI driver SLC90e66_IDE lacks driver specific resume support. PCI driver TC86C001 lacks driver specific resume support. PCI driver TRIFLEX_IDE lacks driver specific resume support. PCI driver TRM290_IDE lacks driver specific resume support. PCI driver VIA_IDE lacks driver specific resume support. PCI driver PCI_IDE lacks driver specific resume support. Probing IDE interface ide1... hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide Loading iSCSI transport class v2.0-724. PCI driver sata_svw lacks driver specific resume support. ata_piix 0000:00:1f.2: version 2.11 ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ] ata_piix 0000:00:1f.2: invalid MAP value 0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix Device driver host0 lacks bus and class support for being resumed. scsi1 : ata_piix Device driver host1 lacks bus and class support for being resumed. ata1: SATA max UDMA/133 cmd 0x000118d0 ctl 0x000118c6 bmdma 0x000118b0 irq 22 ata2: SATA max UDMA/133 cmd 0x000118c8 ctl 0x000118c2 bmdma 0x000118b8 irq 22 ata1.00: ATA-7: FUJITSU MHV2100BH, 00000025, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 Device driver target0:0:0 lacks bus and class support for being resumed. scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100B 0000 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk PCI driver sata_promise lacks driver specific resume support. PCI driver sata_qstor lacks driver specific resume support. PCI driver sata_vsc lacks driver specific resume support. PCI driver sata_sis lacks driver specific resume support. PCI driver sata_sx4 lacks driver specific resume support. PCI driver sata_uli lacks driver specific resume support. PCI driver sata_mv lacks driver specific resume support. PCI driver pdc_adma lacks driver specific resume support. usbmon: debugfs is not available usbcore: registered new interface driver mdc800 USB driver mdc800 lacks resume support. drivers/usb/image/mdc800.c: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Suspend v2.2.10 Suspend2 Userspace Storage Manager support registered. Suspend2 Basic User Interface support registered. Suspend2 Compressor support registered. Suspend2 Block I/O support registered. Suspend2 Swap Allocator support registered. Suspend2 File Allocator support registered. Suspend2 Userspace UI support registered. input: PS/2 Mouse as /class/input/input1 input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 Replacing swsusp. No storage allocator is currently active. Rechecking whether we can use one. Suspend2: SwapAllocator: Signature found. Suspend2: Resuming enabled. Suspend2: Normal swapspace found. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. PCI driver shpchp lacks driver specific resume support. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820 Device driver usbdev1.1_ep00 lacks bus and class support for being resumed. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected iTCO_vendor_support: vendor-support=0 Device driver usbdev1.1_ep81 lacks bus and class support for being resumed. ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 Device driver usbdev2.1_ep00 lacks bus and class support for being resumed. usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected Device driver usbdev2.1_ep81 lacks bus and class support for being resumed. ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860 Device driver usbdev3.1_ep00 lacks bus and class support for being resumed. usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Device driver usbdev3.1_ep81 lacks bus and class support for being resumed. ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 19 (level, low) -> IRQ 20 usb 2-2: new full speed USB device using uhci_hcd and address 2 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 20, io base 0x00001880 Device driver usbdev4.1_ep00 lacks bus and class support for being resumed. usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected intel_rng: FWH not detected Device driver usbdev4.1_ep81 lacks bus and class support for being resumed. ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller Device driver usbdev2.2_ep00 lacks bus and class support for being resumed. usb 2-2: configuration #1 chosen from 1 choice ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc544000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Device driver usbdev5.1_ep00 lacks bus and class support for being resumed. usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected Device driver usbdev2.2_ep02 lacks bus and class support for being resumed. Device driver usbdev2.2_ep82 lacks bus and class support for being resumed. Device driver usbdev5.1_ep81 lacks bus and class support for being resumed. Device driver i2c-0 lacks bus and class support for being resumed. agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:07:00.0 to 64 sky2 0000:07:00.0: v1.14 addr 0xd8000000 irq 19 Yukon-FE (0xb7) rev 1 Device driver eth0 lacks bus and class support for being resumed. sky2 eth0: addr 00:01:4a:f6:ca:63 ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 22 sd 0:0:0:0: Attached scsi generic sg0 type 0 iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.0.38d iwl3945: Copyright(c) 2003-2007 Intel Corporation ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:06:00.0 to 64 iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection Device driver 0000:06:00.0 lacks bus and class support for being resumed. Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices Device driver host2 lacks bus and class support for being resumed. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb 5-4: new high speed USB device using ehci_hcd and address 2 Device driver usbdev5.2_ep00 lacks bus and class support for being resumed. usb 5-4: configuration #1 chosen from 1 choice Device driver usbdev5.2_ep02 lacks bus and class support for being resumed. Device driver usbdev5.2_ep82 lacks bus and class support for being resumed. Yenta: CardBus bridge found at 0000:09:04.0 [104d:81e6] Yenta: Enabling burst memory read transactions ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1b.0 to 64 Yenta: Using CSCINT to route CSC interrupts to PCI iwl3945: Channel 14 [2.4GHz] is Tx only -- skipping. iwl3945: Channel 183 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 184 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 185 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 187 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 188 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 189 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 192 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 196 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 7 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 8 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 11 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 12 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 16 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 145 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 149 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 153 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 157 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 161 [5.2GHz] is Tx only -- skipping. iwl3945: Channel 165 [5.2GHz] is Tx only -- skipping. iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels Device driver phy0 lacks bus and class support for being resumed. Device driver wmaster0 lacks bus and class support for being resumed. wmaster0: Selected rate control algorithm 'iwl-3945-rs' Device driver wlan0 lacks bus and class support for being resumed. usb 5-6: new high speed USB device using ehci_hcd and address 4 Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64 Device driver usbdev5.4_ep00 lacks bus and class support for being resumed. usb 5-6: configuration #1 chosen from 1 choice Device driver usbdev5.4_ep81 lacks bus and class support for being resumed. Device driver usbdev5.4_ep86 lacks bus and class support for being resumed. Linux video capture interface: v2.00 usbcam: registering driver r5u870 0.10.0 Yenta: ISA IRQ mask 0x0cf8, PCI irq 21 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff cs: IO port probe 0x5000-0x5fff: clean. pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff usb 2-2: USB disconnect, address 2 scsi3 : SCSI emulation for USB Mass Storage devices Device driver host3 lacks bus and class support for being resumed. usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning Device driver pcmcia_socket0 lacks bus and class support for being resumed. r5u870-0: Detected Sony VGP-VCC2 (VAIO SZ) Device driver 5-6 lacks bus and class support for being resumed. usbcore: registered new interface driver r5u870 usb 3-1: new full speed USB device using uhci_hcd and address 2 cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0x800-0x80f: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0xa00-0xaff: clean. Device driver usbdev3.2_ep00 lacks bus and class support for being resumed. usb 3-1: configuration #1 chosen from 1 choice Device driver usbdev3.2_ep81 lacks bus and class support for being resumed. Device driver usbdev3.2_ep02 lacks bus and class support for being resumed. Device driver usbdev3.2_ep83 lacks bus and class support for being resumed. Adding 1004052k swap on /dev/sda3. Priority:-1 extents:1 across:1004052k usb 4-2: new full speed USB device using uhci_hcd and address 2 Device driver usbdev4.2_ep00 lacks bus and class support for being resumed. usb 4-2: configuration #1 chosen from 1 choice Device driver usbdev4.2_ep81 lacks bus and class support for being resumed. Device driver usbdev4.2_ep02 lacks bus and class support for being resumed. Device driver usbdev4.2_ep82 lacks bus and class support for being resumed. Device driver usbdev4.2_ep03 lacks bus and class support for being resumed. Device driver usbdev4.2_ep83 lacks bus and class support for being resumed. EXT3 FS on sda2, internal journal Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 Device driver usbdev4.2_ep03 lacks bus and class support for being resumed. Device driver usbdev4.2_ep83 lacks bus and class support for being resumed. Device driver hci0 lacks bus and class support for being resumed. usbcore: registered new interface driver hci_usb kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Device driver target3:0:0 lacks bus and class support for being resumed. scsi 3:0:0:0: Direct-Access Sony USB HS-CARD 4.52 PQ: 0 ANSI: 0 sd 3:0:0:0: [sdb] Attached SCSI removable disk sd 3:0:0:0: Attached scsi generic sg1 type 0 Device driver target3:0:1 lacks bus and class support for being resumed. Device driver target3:0:2 lacks bus and class support for being resumed. Device driver target3:0:3 lacks bus and class support for being resumed. Device driver target3:0:4 lacks bus and class support for being resumed. Device driver target3:0:5 lacks bus and class support for being resumed. Device driver target3:0:6 lacks bus and class support for being resumed. Device driver target3:0:7 lacks bus and class support for being resumed. usb-storage: device scan complete fuse init (API version 7.8) sky2 eth0: enabling interface sky2 eth0: ram buffer 4K iwl3945: REPLY_ADD_STA failed wlan0: Initial auth_alg=0 wlan0: authenticate with AP 00:14:c1:0f:94:5c wlan0: RX authentication from 00:14:c1:0f:94:5c (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:14:c1:0f:94:5c wlan0: RX AssocResp from 00:14:c1:0f:94:5c (capab=0x411 status=0 aid=1) wlan0: associated sky2 eth0: disabling interface sky2 eth0: enabling interface sky2 eth0: ram buffer 4K sky2 eth0: disabling interface ata1: soft resetting port ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2: soft resetting port ata2: EH complete ata2: soft resetting port ata2: EH complete Device driver target3:0:1 lacks bus and class support for being resumed. Device driver target3:0:2 lacks bus and class support for being resumed. Device driver target3:0:3 lacks bus and class support for being resumed. Device driver target3:0:4 lacks bus and class support for being resumed. Device driver target3:0:5 lacks bus and class support for being resumed. Device driver target3:0:6 lacks bus and class support for being resumed. Device driver target3:0:7 lacks bus and class support for being resumed. NET: Registered protocol family 10 lo: Disabled Privacy Extensions wlan0: duplicate address detected! Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8115 buckets, 64920 max) ACPI: SSDT 3F676CB5, 01A8 (r1 Sony N0 20060710 PTL 20050624) ACPI: SSDT 3F6769FB, 0235 (r1 Sony N0 20060710 PTL 20050624) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 3F676E5D, 0089 (r1 Sony N0 20060710 PTL 20050624) ACPI: SSDT 3F676C30, 0085 (r1 Sony N0 20060710 PTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. sony-laptop: Sony Programmable IO Control Driver v0.5. sony-laptop: detected Type3 model input: Sony Vaio Keys as /class/input/input3 input: Sony Vaio Jogdial as /class/input/input4 sony-laptop: device allocated minor is 61 sony-laptop: Sony Notebook Control Driver v0.5. ACPI: AC Adapter [ACAD] (off-line) ACPI: Battery Slot [BAT1] (battery present) [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [drm] Initialized i915 1.6.0 20060119 on minor 0 Clocksource tsc unstable (delta = -77652446 ns)