sd 0:0:0:0: Attached scsi generic sg0 type 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: AGP aperture is 128M @ 0xf0000000
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c0210665>] kobject_shadow_add+0x115/0x1b0
 [<c013bcb4>] mod_sysfs_setup+0x24/0xc0
 [<c013d4f2>] sys_init_module+0x15c2/0x18c0
 [<c015489d>] do_mmap_pgoff+0x57d/0x7c0
 [<c0102a82>] syscall_call+0x7/0xb
 [<c0380000>] __inet6_check_established+0x3c0/0x440
 =======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c0210665>] kobject_shadow_add+0x115/0x1b0
 [<c013bcb4>] mod_sysfs_setup+0x24/0xc0
 [<c013d4f2>] sys_init_module+0x15c2/0x18c0
 [<c015489d>] do_mmap_pgoff+0x57d/0x7c0
 [<c0102a82>] syscall_call+0x7/0xb
 [<c0380000>] __inet6_check_established+0x3c0/0x440
 =======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c0210665>] kobject_shadow_add+0x115/0x1b0
 [<c013bcb4>] mod_sysfs_setup+0x24/0xc0
 [<c013d4f2>] sys_init_module+0x15c2/0x18c0
 [<c015489d>] do_mmap_pgoff+0x57d/0x7c0
 [<c0102a82>] syscall_call+0x7/0xb
 [<c0380000>] __inet6_check_established+0x3c0/0x440
 =======================
kobject_add failed for ehci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c0210665>] kobject_shadow_add+0x115/0x1b0
 [<c013bcb4>] mod_sysfs_setup+0x24/0xc0
 [<c013d4f2>] sys_init_module+0x15c2/0x18c0
 [<c015489d>] do_mmap_pgoff+0x57d/0x7c0
 [<c0102a82>] syscall_call+0x7/0xb
 =======================
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c0210665>] kobject_shadow_add+0x115/0x1b0
 [<c013bcb4>] mod_sysfs_setup+0x24/0xc0
 [<c013d4f2>] sys_init_module+0x15c2/0x18c0
 [<c015489d>] do_mmap_pgoff+0x57d/0x7c0
 [<c0102a82>] syscall_call+0x7/0xb
 [<c0380000>] __inet6_check_established+0x3c0/0x440
 =======================
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50437 usecs
intel8x0: clocking to 48000
sk98lin: driver has been replaced by the skge driver and is scheduled for removal
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 20 (level, low) -> IRQ 21
eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
      PrefPort:A  RlmtMode:Check Link State
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4F11
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
kobject_add failed for usb_storage with -EEXIST, don't try to register things with the same name in the same directory.
 [<c0210665>] kobject_shadow_add+0x115/0x1b0
 [<c013bcb4>] mod_sysfs_setup+0x24/0xc0
 [<c013d4f2>] sys_init_module+0x15c2/0x18c0
 [<c0102a82>] syscall_call+0x7/0xb
 [<c0380000>] __inet6_check_established+0x3c0/0x440
 =======================
kobject_add failed for usb_storage with -EEXIST, don't try to register things with the same name in the same directory.
 [<c0210665>] kobject_shadow_add+0x115/0x1b0
 [<c013bcb4>] mod_sysfs_setup+0x24/0xc0
 [<c013d4f2>] sys_init_module+0x15c2/0x18c0
 [<c015489d>] do_mmap_pgoff+0x57d/0x7c0
 [<c0102a82>] syscall_call+0x7/0xb
 [<c0380000>] __inet6_check_established+0x3c0/0x440
 =======================