# ----------- global configuration parameters ---------------------

debug=3         # debug level (cmd line: -dddddddddd)
fork=yes
#log_stderror=yes       # (cmd line: -E)
check_via=no    # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
listen=10.100.1.11
port=5060
mpath="/usr/local/lib/openser/modules/"
# ------------------ module loading -------------------------------

loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
# --------------- setting module-specific parameters --------------

# -- usrloc params --
modparam("usrloc", "db_mode",   0)
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# --------------------  request routing logic ----------------

# main routing logic #

route{

        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                exit;
        };
        if (msg:len >=  2048 ) {
                sl_send_reply("513", "Message too big");
                exit;
        };
                exit;
        };


if (method=="OPTIONS") { sl_send_reply("200", "OK"); };

 #########Routing Engine############
if (uri=~"^sip:[+]*[1]*123456789.*") {
rewriteuri("sip:107123456789@10.101.2.5");
route(1);
exit;
};
if (uri=~"^sip:[+]*[1]*987654321.*") {
rewritehostport("10.101.1.2:5060");
route(1);
exit;
};


if (src_ip==10.101.1.12) {
rewritehostport("10.101.1.10:5060");
route(1);
exit;
};


if (src_ip==10.101.1.11) {
rewritehostport("10.101.1.2:5060");
route(1);
exit;
};


}

route[1]
{
        # send it out now; use stateful forwarding as it works reliably
        # even for UDP2TCP
        if (!t_relay()) {
                sl_reply_error();
                exit;
        };
exit;
}