/etc/asterisk/zapata.conf


[trunkgroups]

[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1

immediate=no

;Sangoma A101 port 1 [slot:3 bus:13 span: 1]
switchtype=national
context=from-pstn
group=0
signalling=pri_cpe
channel => 1-23
***************************************************************************
/etc/zaptel.conf

loadzone=us
defaultzone=us

#Sangoma A101 port 1 [slot:3 bus:13 span: 1]
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24

***************************************************************************
/etc/wanpipe/wanpipe1.conf

# Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit
#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Wed Dec  6 20:29:03 UTC 2006
#
# Note: This file was generated automatically
#       by /usr/local/sbin/setup-sangoma program.
#
#       If you want to edit this file, it is
#       recommended that you use wancfg program
#       to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment

[wanpipe1]
CARD_TYPE   = AFT 
S514CPU   = A 
CommPort  = PRI 
AUTO_PCISLOT  = NO
PCISLOT   = 3 
PCIBUS    = 13
FE_MEDIA  = T1
FE_LCODE  = B8ZS
FE_FRAME  = ESF 
FE_LINE   = 1 
TE_CLOCK  = NORMAL
TE_REF_CLOCK    = 0 

TE_HIGHIMPEDANCE  = NO
LBO     = 0DB 
FE_TXTRISTATE = NO
MTU     = 1500
UDPPORT   = 9000
TTL   = 255 
IGNORE_FRONT_END = NO
TDMV_SPAN = 1 
TDMV_DCHAN  = 24

[w1g1]
ACTIVE_CH = ALL 
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES