Myth:~# lspci -tv -[0000:00]-+-00.0 Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface +-02.0 Intel Corporation 82865G Integrated Graphics Controller +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.3 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0000:01]--+-02.0 Philips Semiconductors SAA7146 | \-08.0 Intel Corporation 82562EZ 10/100 Ethernet Controller +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge +-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller +-1f.2 Intel Corporation 82801EB (ICH5) SATA Controller +-1f.3 Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller \-1f.5 Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller Myth:~# dmesg accel = 1, hwcursor = 0, fixed = 0, noinit = 0 intelfb: options: mode = "" intelfb: intelfb_set_fbinfo intelfb: intelfb_init_var intelfb: intelfb_check_var: accel_flags is 0 intelfb: Mode is interlaced. intelfb: intelfb_check_var: accel_flags is 0 intelfb: intelfb_var_to_depth: bpp: 32, green.length is 0 intelfb: intelfb_check_var: accel_flags is 0 intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8 intelfb: Initial video mode is 1024x768-32@70. intelfb: Initial video mode is from 1. intelfb: update_dinfo intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8 intelfb: I2C bus CRTDDC_A registered. intelfb: I2C bus DVODDC_D registered. intelfb: I2C bus DVOI2C_E registered. intelfb: intelfbhw_print_hw_state hw state dump start VGA0_DIVISOR: 0x00021207 VGA1_DIVISOR: 0x00031406 VGAPD: 0x0000888b VGA0: (m1, m2, n, p1, p2) = (18, 7, 2, 0, 0) VGA0: clock is 327000 VGA1: (m1, m2, n, p1, p2) = (20, 6, 3, 0, 0) VGA1: clock is 283200 DPLL_A: 0xc08b0000 DPLL_B: 0x00000000 FPA0: 0x00021207 FPA1: 0x00021207 FPB0: 0x00000000 FPB1: 0x00000000 PLLA0: (m1, m2, n, p1, p2) = (18, 7, 2, 11, 1) PLLA0: clock is 25153 PLLA1: (m1, m2, n, p1, p2) = (18, 7, 2, 11, 1) PLLA1: clock is 25153 HTOTAL_A: 0x031f027f HBLANK_A: 0x03170287 HSYNC_A: 0x02ef028f VTOTAL_A: 0x020c01df VBLANK_A: 0x020401e7 VSYNC_A: 0x01eb01e9 SRC_SIZE_A: 0x00000000 BCLRPAT_A: 0x00000000 HTOTAL_B: 0x00000000 HBLANK_B: 0x00000000 HSYNC_B: 0x00000000 VTOTAL_B: 0x00000000 VBLANK_B: 0x00000000 VSYNC_B: 0x00000000 SRC_SIZE_B: 0x00000000 BCLRPAT_B: 0x00000000 ADPA: 0x80008018 DVOA: 0x00000000 DVOB: 0x00000000 DVOC: 0x00000000 DVOA_SRCDIM: 0x00000000 DVOB_SRCDIM: 0x002d0190 DVOC_SRCDIM: 0x002d0190 LVDS: 0x00000000 PIPEACONF: 0x80000000 PIPEBCONF: 0x00000000 DISPARB: 0x0000005f CURSOR_A_CONTROL: 0x00000000 CURSOR_B_CONTROL: 0x00000000 CURSOR_A_BASEADDR: 0x00000000 CURSOR_B_BASEADDR: 0x00000000 CURSOR_A_PALETTE: 0x00000000, 0x00000000, 0x00000000, 0x00000000 CURSOR_B_PALETTE: 0x00000000, 0x00000000, 0x00000000, 0x00000000 CURSOR_SIZE: 0x00000000 DSPACNTR: 0x00000000 DSPBCNTR: 0x00000000 DSPABASE: 0x00000000 DSPBBASE: 0x00000000 DSPASTRIDE: 0x00000000 DSPBSTRIDE: 0x00000000 VGACNTRL: 0x0000008e ADD_ID: 0x000000ff SWF00 0x00000000 SWF01 0x00000000 SWF02 0x00000000 SWF03 0x00000000 SWF04 0x00000000 SWF05 0x00000000 SWF06 0x00000000 SWF10 0x00000001 SWF11 0x00000000 SWF12 0x00000000 SWF13 0x03030000 SWF14 0xc0000000 SWF15 0x00000001 SWF16 0x00000000 SWF30 0x00000000 SWF31 0x00000000 SWF32 0x00000000 FENCE0 0x00000000 FENCE1 0x00000000 FENCE2 0x00000000 FENCE3 0x00000000 FENCE4 0x00000000 FENCE5 0x00000000 FENCE6 0x00000000 FENCE7 0x00000000 INSTPM 0x00000000 MEM_MODE 0x00000000 FW_BLC_0 0x01080108 FW_BLC_1 0x00000108 HWSTAM 0xffff IER 0x0000 IIR 0x0000 IMR 0xffff hw state dump end intelfb: intelfb_set_par (1024x768-32) intelfb: intelfbhw_mode_to_hw intelfb: Clock is 75001 intelfb: p range is 4-16 (4) intelfb: m, n, p: 137 (22,15), 11 (9), 8 (0,1), f: 74727 (74727), VCO: 597816 intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8 intelfb: H: act 1024, ss 1048, se 1184, tot 1328 bs 1024, be 1328 intelfb: V: act 768, ss 771, se 777, tot 806 bs 768, be 778 intelfb: pitch is 4096 intelfb: intelfbhw_print_hw_state hw state dump start VGA0_DIVISOR: 0x00021207 VGA1_DIVISOR: 0x00031406 VGAPD: 0x0000888b VGA0: (m1, m2, n, p1, p2) = (18, 7, 2, 0, 0) VGA0: clock is 327000 VGA1: (m1, m2, n, p1, p2) = (20, 6, 3, 0, 0) VGA1: clock is 283200 DPLL_A: 0xd0800000 DPLL_B: 0x00000000 FPA0: 0x0009160f FPA1: 0x0009160f FPB0: 0x00000000 FPB1: 0x00000000 PLLA0: (m1, m2, n, p1, p2) = (22, 15, 9, 0, 1) PLLA0: clock is 74727 PLLA1: (m1, m2, n, p1, p2) = (22, 15, 9, 0, 1) PLLA1: clock is 74727 HTOTAL_A: 0x052f03ff HBLANK_A: 0x052f03ff HSYNC_A: 0x049f0417 VTOTAL_A: 0x032502ff VBLANK_A: 0x030902ff VSYNC_A: 0x03080302 SRC_SIZE_A: 0x03ff02ff BCLRPAT_A: 0x00000000 HTOTAL_B: 0x00000000 HBLANK_B: 0x00000000 HSYNC_B: 0x00000000 VTOTAL_B: 0x00000000 VBLANK_B: 0x00000000 VSYNC_B: 0x00000000 SRC_SIZE_B: 0x00000000 BCLRPAT_B: 0x00000000 ADPA: 0x80000000 DVOA: 0x00000000 DVOB: 0x00000000 DVOC: 0x00000000 DVOA_SRCDIM: 0x00000000 DVOB_SRCDIM: 0x00000000 DVOC_SRCDIM: 0x00000000 LVDS: 0x00000000 PIPEACONF: 0x80000000 PIPEBCONF: 0x00000000 DISPARB: 0x0000005f CURSOR_A_CONTROL: 0x00000000 CURSOR_B_CONTROL: 0x00000000 CURSOR_A_BASEADDR: 0x00000000 CURSOR_B_BASEADDR: 0x00000000 CURSOR_A_PALETTE: 0x00000000, 0x00000000, 0x00000000, 0x00000000 CURSOR_B_PALETTE: 0x00000000, 0x00000000, 0x00000000, 0x00000000 CURSOR_SIZE: 0x00000000 DSPACNTR: 0x98000000 DSPBCNTR: 0x00000000 DSPABASE: 0x00000000 DSPBBASE: 0x00000000 DSPASTRIDE: 0x00001000 DSPBSTRIDE: 0x00000000 VGACNTRL: 0x8000008e ADD_ID: 0x000000ff SWF00 0x00000000 SWF01 0x00000000 SWF02 0x00000000 SWF03 0x00000000 SWF04 0x00000000 SWF05 0x00000000 SWF06 0x00000000 SWF10 0x00000001 SWF11 0x00000000 SWF12 0x00000000 SWF13 0x03030000 SWF14 0xc0000000 SWF15 0x00000001 SWF16 0x00000000 SWF30 0x00000000 SWF31 0x00000000 SWF32 0x00000000 FENCE0 0x00000000 FENCE1 0x00000000 FENCE2 0x00000000 FENCE3 0x00000000 FENCE4 0x00000000 FENCE5 0x00000000 FENCE6 0x00000000 FENCE7 0x00000000 INSTPM 0x00000000 MEM_MODE 0x00000000 FW_BLC_0 0x01080108 FW_BLC_1 0x00000108 HWSTAM 0xffff IER 0x0000 IIR 0x0000 IMR 0xffff hw state dump end intelfb: update_dinfo intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8 Console: switching to colour frame buffer device 128x48 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5 e100: eth0: e100_probe: addr 0xff900000, irq 5, MAC addr 00:13:20:DD:C2:B6 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: Maxtor 7Y250P0, ATA DISK drive hdb: HL-DT-ST GCE-8520B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: max request size: 512KiB hda: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 > hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3 TCP cubic registered NET: Registered protocol family 1 Using IPI Shortcut mode EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: hda1: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 12369938 ext3_orphan_cleanup: deleting unreferenced inode 12369931 ext3_orphan_cleanup: deleting unreferenced inode 12369930 ext3_orphan_cleanup: deleting unreferenced inode 12369928 ext3_orphan_cleanup: deleting unreferenced inode 12369927 EXT3-fs: hda1: 5 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 132k freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000c800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Real Time Clock Driver v1.12ac ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000cc00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000d000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-2: new full speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.3[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 11, io base 0x0000d400 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 9, io mem 0xffa80000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found usb 1-2: unable to read config index 0 descriptor/all usb 1-2: can't read configurations, error -71 hub 5-0:1.0: 8 ports detected ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 50152 usecs intel8x0: clocking to 48000 usb 1-2: new full speed USB device using uhci_hcd and address 4 usb 1-2: configuration #1 chosen from 1 choice Adding 1453840k swap on /dev/hda5. Priority:-1 extents:1 across:1453840k EXT3 FS on hda1, internal journal NET: Registered protocol family 17 Capability LSM initialized ACPI: Processor [CPU1] (supports 8 throttling states) device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input1 ACPI: Sleep Button (CM) [SLPB] intelfb: intelfb_check_var: accel_flags is 1 intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8 intelfb: intelfb_set_par (1024x768-32) intelfb: intelfbhw_mode_to_hw intelfb: Clock is 75001 intelfb: p range is 4-16 (4) intelfb: m, n, p: 137 (22,15), 11 (9), 8 (0,1), f: 74727 (74727), VCO: 597816 intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8 intelfb: H: act 1024, ss 1048, se 1184, tot 1328 bs 1024, be 1328 intelfb: V: act 768, ss 771, se 777, tot 806 bs 768, be 778 intelfb: pitch is 4096 intelfb: intelfbhw_print_hw_state hw state dump start VGA0_DIVISOR: 0x00021207 VGA1_DIVISOR: 0x00031406 VGAPD: 0x0000888b VGA0: (m1, m2, n, p1, p2) = (18, 7, 2, 0, 0) VGA0: clock is 327000 VGA1: (m1, m2, n, p1, p2) = (20, 6, 3, 0, 0) VGA1: clock is 283200 DPLL_A: 0xd0800000 DPLL_B: 0x00000000 FPA0: 0x0009160f FPA1: 0x0009160f FPB0: 0x00000000 FPB1: 0x00000000 PLLA0: (m1, m2, n, p1, p2) = (22, 15, 9, 0, 1) PLLA0: clock is 74727 PLLA1: (m1, m2, n, p1, p2) = (22, 15, 9, 0, 1) PLLA1: clock is 74727 HTOTAL_A: 0x052f03ff HBLANK_A: 0x052f03ff HSYNC_A: 0x049f0417 VTOTAL_A: 0x032502ff VBLANK_A: 0x030902ff VSYNC_A: 0x03080302 SRC_SIZE_A: 0x03ff02ff BCLRPAT_A: 0x00000000 HTOTAL_B: 0x00000000 HBLANK_B: 0x00000000 HSYNC_B: 0x00000000 VTOTAL_B: 0x00000000 VBLANK_B: 0x00000000 VSYNC_B: 0x00000000 SRC_SIZE_B: 0x00000000 BCLRPAT_B: 0x00000000 ADPA: 0x80000000 DVOA: 0x00000000 DVOB: 0x00000000 DVOC: 0x00000000 DVOA_SRCDIM: 0x00000000 DVOB_SRCDIM: 0x003ff2ff DVOC_SRCDIM: 0x003ff2ff LVDS: 0x00000000 PIPEACONF: 0x80000000 PIPEBCONF: 0x00000000 DISPARB: 0x0000005f CURSOR_A_CONTROL: 0x00000000 CURSOR_B_CONTROL: 0x00000000 CURSOR_A_BASEADDR: 0x00000000 CURSOR_B_BASEADDR: 0x00000000 CURSOR_A_PALETTE: 0x00000000, 0x00000000, 0x00000000, 0x00000000 CURSOR_B_PALETTE: 0x00000000, 0x00000000, 0x00000000, 0x00000000 CURSOR_SIZE: 0x00000000 DSPACNTR: 0x98000000 DSPBCNTR: 0x00000000 DSPABASE: 0x00000000 DSPBBASE: 0x00000000 DSPASTRIDE: 0x00001000 DSPBSTRIDE: 0x00000000 VGACNTRL: 0x8000008e ADD_ID: 0x000000ff SWF00 0x00000000 SWF01 0x00000000 SWF02 0x00000000 SWF03 0x00000000 SWF04 0x00000000 SWF05 0x00000000 SWF06 0x00000000 SWF10 0x00000001 SWF11 0x00000000 SWF12 0x00000000 SWF13 0x03030000 SWF14 0xc0000000 SWF15 0x00000001 SWF16 0x00000000 SWF30 0x00000000 SWF31 0x00000000 SWF32 0x00000000 FENCE0 0x00000000 FENCE1 0x00000000 FENCE2 0x00000000 FENCE3 0x00000000 FENCE4 0x00000000 FENCE5 0x00000000 FENCE6 0x00000000 FENCE7 0x00000000 INSTPM 0x00000000 MEM_MODE 0x00000000 FW_BLC_0 0x01080108 FW_BLC_1 0x00000108 HWSTAM 0xffff IER 0x0000 IIR 0x0000 IMR 0xffff hw state dump end intelfb: update_dinfo intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8