;
; Static extension configuration file, used by
; the pbx_config module. This is where you configure all your 
; inbound and outbound calls in Asterisk. 
; 
; This configuration file is reloaded 
; - With the "extensions reload" command in the CLI
; - With the "reload" command (that reloads everything) in the CLI

;
; The "General" category is for certain variables.  
;
[general]
;
; If static is set to no, or omitted, then the pbx_config will rewrite
; this file when extensions are modified.  Remember that all comments
; made in the file will be lost when that happens. 
;
; XXX Not yet implemented XXX
;
static=yes
;
; if static=yes and writeprotect=no, you can save dialplan by
; CLI command 'save dialplan' too
;
writeprotect=yes
;
; If autofallthrough is set, then if an extension runs out of
; things to do, it will terminate the call with BUSY, CONGESTION
; or HANGUP depending on Asterisk's best guess (strongly recommended).
;
; If autofallthrough is not set, then if an extension runs out of 
; things to do, asterisk will wait for a new extension to be dialed 
; (this is the original behavior of Asterisk 1.0 and earlier).
;
autofallthrough=yes
;
; If clearglobalvars is set, global variables will be cleared 
; and reparsed on an extensions reload, or Asterisk reload.
;
; If clearglobalvars is not set, then global variables will persist
; through reloads, and even if deleted from the extensions.conf or
; one of its included files, will remain set to the previous value.
;
clearglobalvars=no
;
; If priorityjumping is set to 'yes', then applications that support
; 'jumping' to a different priority based on the result of their operations
; will do so (this is backwards compatible behavior with pre-1.2 releases
; of Asterisk). Individual applications can also be requested to do this
; by passing a 'j' option in their arguments.
;
priorityjumping=yes
;
; You can include other config files, use the #include command
; (without the ';'). Note that this is different from the "include" command
; that includes contexts within other contexts. The #include command works
; in all asterisk configuration files.
;#include "filename.conf"

; The "Globals" category contains global variables that can be referenced
; in the dialplan with ${VARIABLE} or ${ENV(VARIABLE)} for Environmental
; variables,
; ${${VARIABLE}} or ${text${VARIABLE}} or any hybrid
;
;[globals]
#include "exten_gvars.inc"
;
; Sample entries for extensions.conf
;
;
[dundi-e164-canonical]
;
; List canonical entries here
;
;exten => 12564286000,1,Macro(std-exten,6000,IAX2/foo)
;exten => _125642860XX,1,Dial(IAX2/otherbox/${EXTEN:7})

[dundi-e164-customers]
;
; If you are an ITSP or Reseller, list your customers here.
;
;exten => _12564286000,1,Dial(SIP/customer1)
;exten => _12564286001,1,Dial(IAX2/customer2)

[dundi-e164-via-pstn]
;
; If you are freely delivering calls to the PSTN, list them here
;
;exten => _1256428XXXX,1,Dial(Zap/g2/${EXTEN:7}) ; Expose all of 256-428 
;exten => _1256325XXXX,1,Dial(Zap/g2/${EXTEN:7}) ; Ditto for 256-325

[dundi-e164-local]
;
; Context to put your dundi IAX2 or SIP user in for
; full access
;
include => dundi-e164-canonical
include => dundi-e164-customers
include => dundi-e164-via-pstn

[dundi-e164-switch]
;
; Just a wrapper for the switch
;
switch => DUNDi/e164

[dundi-e164-lookup]
;
; Locally to lookup, try looking for a local E.164 solution
; then try DUNDi if we don't have one.
;
include => dundi-e164-local
include => dundi-e164-switch
;
; DUNDi can also be implemented as a Macro instead of using 
; the Local channel driver. 
;
[macro-dundi-e164]
;
; ARG1 is the extension to Dial
;
exten => s,1,Goto(${ARG1},1)
include => dundi-e164-lookup

;
; Here are the entries you need to participate in the IAXTEL
; call routing system.  Most IAXTEL numbers begin with 1-700, but
; there are exceptions.  For more information, and to sign
; up, please go to www.gnophone.com or www.iaxtel.com
;
[iaxtel700]
exten => _91700XXXXXXX,1,Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel)

;
; The SWITCH statement permits a server to share the dialplan with
; another server. Use with care: Reciprocal switch statements are not
; allowed (e.g. both A -> B and B -> A), and the switched server needs
; to be on-line or else dialing can be severly delayed.
;
[iaxprovider]
;switch => IAX2/user:[key]@myserver/mycontext

[trunk]
exten => _01.,1,Dial(${trunk1}/${EXTEN:2})
exten => _01.,2,Congestion
exten => _02.,1,Dial(${trunk2}/${EXTEN:2})
exten => _02.,2,Congestion

[trunkint]
;
; International long distance through trunk
;
exten => _9011.,1,Macro(dundi-e164,${EXTEN:4})
exten => _9011.,n,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})

[trunkld]
;
; Long distance context accessed through trunk
;
exten => _91NXXNXXXXXX,1,Macro(dundi-e164,${EXTEN:1})
exten => _91NXXNXXXXXX,n,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})

[trunklocal]
;
; Local seven-digit dialing accessed through trunk interface
;
exten => _9NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})

[trunktollfree]
;
; Long distance context accessed through trunk interface
;
exten => _91800NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91888NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91877NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91866NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})

[international]
;
; Master context for international long distance
;
ignorepat => 9
include => longdistance
include => trunkint

[longdistance]
;
; Master context for long distance
;
ignorepat => 9
include => local
include => trunkld

[local]
;
; Master context for local, toll-free, and iaxtel calls only
;
ignorepat => 9
include => default
include => parkedcalls
include => trunklocal
include => iaxtel700
include => trunktollfree
include => iaxprovider
;
; You can use an alternative switch type as well, to resolve
; extensions that are not known here, for example with remote 
; IAX switching you transparently get access to the remote
; Asterisk PBX
; 
; switch => IAX2/user:password@bigserver/local
;
; An "lswitch" is like a switch but is literal, in that
; variable substitution is not performed at load time
; but is passed to the switch directly (presumably to
; be substituted in the switch routine itself)
;
; lswitch => Loopback/12${EXTEN}@othercontext
;
; An "eswitch" is like a switch but the evaluation of
; variable substitution is performed at runtime before
; being passed to the switch routine.
;
; eswitch => IAX2/context@${CURSERVER}

[macro-stdexten];
;
; Standard extension macro:
;   ${ARG1} - Extension  (we could have used ${MACRO_EXTEN} here as well
;   ${ARG2} - Device(s) to ring
;
exten => s,1,Dial(${ARG2},20)					; Ring the interface, 20 seconds maximum
exten => s,2,Goto(s-${DIALSTATUS},1)				; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)

exten => s-NOANSWER,1,Voicemail(u${ARG1})		; If unavailable, send to voicemail w/ unavail announce
exten => s-NOANSWER,2,Goto(default,s,1)			; If they press #, return to start

exten => s-BUSY,1,Voicemail(b${ARG1})			; If busy, send to voicemail w/ busy announce
exten => s-BUSY,2,Goto(default,s,1)				; If they press #, return to start

exten => _s-.,1,Goto(s-NOANSWER,1)				; Treat anything else as no answer

exten => a,1,VoicemailMain(${ARG1})				; If they press *, send the user into VoicemailMain

[macro-stdPrivacyexten];
;
; Standard extension macro:
;   ${ARG1} - Extension  (we could have used ${MACRO_EXTEN} here as well
;   ${ARG2} - Device(s) to ring
;   ${ARG3} - Optional DONTCALL context name to jump to (assumes the s,1 extension-priority)
;   ${ARG4} - Optional TORTURE context name to jump to (assumes the s,1 extension-priority)`
;
exten => s,1,Dial(${ARG2},20|p)					; Ring the interface, 20 seconds maximum, call screening option (or use P for databased call screening)
exten => s,2,Goto(s-${DIALSTATUS},1)				; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)

exten => s-NOANSWER,1,Voicemail(u${ARG1})		; If unavailable, send to voicemail w/ unavail announce
exten => s-NOANSWER,2,Goto(default,s,1)			; If they press #, return to start

exten => s-BUSY,1,Voicemail(b${ARG1})			; If busy, send to voicemail w/ busy announce
exten => s-BUSY,2,Goto(default,s,1)				; If they press #, return to start

exten => s-DONTCALL,1,Goto(${ARG3},s,1)               ; Callee chose to send this call to a polite "Don't call again" script.

exten => s-TORTURE,1,Goto(${ARG4},s,1)                ; Callee chose to send this call to a telemarketer torture script.

exten => _s-.,1,Goto(s-NOANSWER,1)				; Treat anything else as no answer

exten => a,1,VoicemailMain(${ARG1})				; If they press *, send the user into VoicemailMain

[internal]
exten => 3000,1,Dial(${ip3000},30,Ttm)
exten => 3000,2,Voicemail(u3000)
exten => 3000,3,Hangup
exten => 3000,102,Voicemail(b3000)
exten => 3000,103,Hangup
exten => 3001,1,Dial(${ip3001},30,Ttm)
exten => 3001,2,Voicemail(u3001)
exten => 3001,3,Hangup
exten => 3001,102,Voicemail(b3001)
exten => 3001,103,Hangup
exten => 3002,1,Dial(${ip3002},30,Ttm)
exten => 3002,2,Voicemail(u3002)
exten => 3002,3,Hangup
exten => 3002,102,Voicemail(b3002)
exten => 3002,103,Hangup
exten => 3003,1,Dial(${ip3003},30,Ttm)
exten => 3003,2,Voicemail(u3003)
exten => 3003,3,Hangup
exten => 3003,102,Voicemail(b3003)
exten => 3003,103,Hangup
exten => 3004,1,Dial(${ip3004},30,Ttm)
exten => 3004,2,Voicemail(u3004)
exten => 3004,3,Hangup
exten => 3004,102,Voicemail(b3004)
exten => 3004,103,Hangup
exten => 3005,1,Dial(${ip3005},30,Ttm)
exten => 3005,2,Voicemail(u3005)
exten => 3005,3,Hangup
exten => 3005,102,Voicemail(b3005)
exten => 3005,103,Hangup
exten => 3006,1,Dial(${ip3006},30,Ttm)
exten => 3006,2,Voicemail(u3006)
exten => 3006,3,Hangup
exten => 3006,102,Voicemail(b3006)
exten => 3006,103,Hangup
exten => 3007,1,Dial(${ip3007},30,Ttm)
exten => 3007,2,Voicemail(u3007)
exten => 3007,3,Hangup
exten => 3007,102,Voicemail(b3007)
exten => 3007,103,Hangup
exten => 3008,1,Dial(${ip3008},30,Ttm)
exten => 3008,2,Voicemail(u3008)
exten => 3008,3,Hangup
exten => 3008,102,Voicemail(b3008)
exten => 3008,103,Hangup

[demo]
;
; We start with what to do when a call first comes in.
;
exten => s,1,Wait,1			; Wait a second, just for fun
exten => s,n,Answer			; Answer the line
exten => s,n,Set(TIMEOUT(digit)=5)	; Set Digit Timeout to 5 seconds
exten => s,n,Set(TIMEOUT(response)=10)	; Set Response Timeout to 10 seconds
exten => s,n(restart),BackGround(demo-congrats)	; Play a congratulatory message
exten => s,n(instruct),BackGround(demo-instruct)	; Play some instructions
exten => s,n,WaitExten		; Wait for an extension to be dialed.

exten => 2,1,BackGround(demo-moreinfo)	; Give some more information.
exten => 2,n,Goto(s,instruct)

exten => 3,1,Set(LANGUAGE()=fr)		; Set language to french
exten => 3,n,Goto(s,restart)			; Start with the congratulations



;
; Create an extension, 5, for dialing the Skype Test Call.
;
exten => 5,1,Playback(transfer,skip)		; "Please hold while..." 
exten => 5,2,Celliax2Skype(echo123)		; call the Skype Test Call
exten => 5,3,Goto(s,restart)		; Return to the start over message.
;
; Skype Contacts Directory
exten => 6,1,Celliax_Skype_Directory(default|default|f) 

; Create an extension, 8, for dialing MYCELLNUMBER
; via Celliax (you can't use this if you are calling on the one
; only Celliax channel. But you can call from IAX, SIP, PSTN, etc...)
;
exten => 20,1,Playback(transfer,skip)		; "Please hold while..." 
exten => 20,2,Dial(CELLIAX/GSM0/${MYCELLNUMBER}) ; dial MYCELLNUMBER from the Celliax channel named by the input audio device it use



exten => 1000,1,Goto(default,s,1)
; We also create an example user, 1234, who is on the console and has
; voicemail, etc.
;
exten => 1234,1,Playback(transfer,skip)		; "Please hold while..." 
					; (but skip if channel is not up)
exten => 1234,n,Macro(stdexten,1234,${ip3000})

exten => 1235,1,Voicemail(u3000})		; Right to voicemail

exten => 1236,1,Dial(${ip3000})		; Ring forever
exten => 1236,n,Voicemail(u3000})		; Unless busy


;
; # for when they're done with the demo
;
exten => #,1,Playback(demo-thanks)		; "Thanks for trying the demo"
exten => #,n,Hangup			; Hang them up.

;
; A timeout and "invalid extension rule"
;
exten => t,1,Goto(#,1)			; If they take too long, give up
exten => i,1,Playback(invalid)		; "That's not valid, try again"

;
; Create an extension, 500, for dialing the
; Asterisk demo.
;
exten => 500,1,Playback(demo-abouttotry); Let them know what's going on
exten => 500,n,Dial(IAX2/guest@misery.digium.com/s@default)	; Call the Asterisk demo
exten => 500,n,Playback(demo-nogo)	; Couldn't connect to the demo site
exten => 500,n,Goto(s,6)		; Return to the start over message.
;
; Create an extension, 501, for dialing the
; AsteriskWin32 demo.
;
exten => 501,1,Playback(pls-wait-connect-call); Let them know what's going on
exten => 501,n,Dial(IAX2/guest@demo.asteriskwin32.com/s@default)	; Call the AsteriskWin32 demo 
exten => 501,n,Playback(cannot-complete-network-error)	; Couldn't connect to the demo site
exten => 501,n,Playback(pls-try-call-later)
exten => 501,n,Goto(s,6)		; Return to the start over message.

;
; Create an extension, 600, for evaluating echo latency.
;
exten => 600,1,Playback(demo-echotest)	; Let them know what's going on
exten => 600,n,Echo			; Do the echo test
exten => 600,n,Playback(demo-echodone)	; Let them know it's over
exten => 600,n,Goto(s,6)		; Start over

;
; Give voicemail at extension 8500
;
exten => 8500,1,VoicemailMain
exten => 8500,n,Goto(s,6)


[default]
;
; By default we include the demo.  In a production system, you 
; probably don't want to have the demo there.
;
include => demo
include => parkedcalls
include => trunk
include => internal


exten => 99990,1,Answer
exten => 99990,2,AGI(agi-test.agi)
exten => 99990,3,Hangup
exten => 99991,1,Answer
exten => 99991,2,EAGI(eagi-test)
exten => 99991,3,Hangup
exten => 99992,1,Answer
exten => 99992,2,Wait(1)
exten => 99992,3,SayUnixTime()
exten => 99992,4,Hangup
exten => 99999,1,Answer
exten => 99999,2,Wait(1)
exten => 99999,3,MusicOnHold


[skype]
exten => s,1,Answer;
exten => s,2,Skype2Celliax(${MYCELLNUMBER}); Connect the Skype incoming call with the cellphone at MYCELLNUMBER
exten => s,3,Hangup			; Hang them up.