............done start kernel [ohio_pre_init] System Clk = 62500000 Hz Linux version 2.6.13.1-ohio (jpluschke@EmbeddedVM) (gcc versi7 YAMON MEMORY DESCRIPTOR dump: prom_memsize = 0x02000000 memsize=32 MByte prom_flashsize = 0x00800000 flashsize=8 MByte &_end=0x9420aec8 PFN_ALIGN(&_end)=0x9420b000 CPHYSADDR(PFN_ALIGN(&_end))=0x1420b000 memsize=0x2000000 [0,941e4fc0]: base<14000000> size<0020b000> type [0,941e4fcc]: base<1420b000> size<01df5000> type prom_memsize = 0x02000000 memsize=32 MByte prom_flashsize = 0x00800000 flashsize=8 MByte &_end=0x9420aec8 PFN_ALIGN(&_end)=0x9420b000 CPHYSADDR(PFN_ALIGN(&_end))=0x1420b000 memsize=0x2000000 CPU revision is: 00018448 ohio_setup+0x0/0x100 [ohio_clk_init]: dsl xtal 35328000Hz lan xtal 25000000Hz [ohio_gpio_init] Determined physical RAM map: memory: 0020b000 @ 14000000 (reserved) memory: 01df5000 @ 1420b000 (usable) On node 0 totalpages: 8192 [alloc_node_mem_map] reduce size from 2883616 Bytes to 262176 Bytes [alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x9420e000-0x9424e020 [alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93f8e000-0x9424e020 DMA zone: 8192 pages, LIFO batch:3 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: console=ttyS0,38400n8r [ld_mmu_r4xx0] memcpy((void *)(CAC_BASE + 0x100), &except_vec2_generic, 0x30) Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes. Primary data cache 8kB, 4-way, linesize 16 bytes. Synthesized TLB refill handler (20 instructions). Base=0x941e2734 TLB synthesizer field overflow (simm) Synthesized TLB load handler fastpath (34 instructions) Base=0x941e5760. TLB synthesizer field overflow (simm) Synthesized TLB store handler fastpath (34 instructions) Base=0x941e5960. TLB synthesizer field overflow (simm) Synthesized TLB modify handler fastpath (33 instructions) Base=0x941e5b60. PID hash table entries: 256 (order: 8, 4096 bytes) [ohio_set_clock_notify] avm_clock_id_cpu notify disable 0x940013f8 0x9419be18 [ohio_set_clock_notify] avm_clock_id_cpu notify enable 0x940013f8 0x9419be18 CPU frequency 211.97 MHz Using 105.984 MHz high precision timer. [setup_irq]: irq 127 irqaction->handler 0x94041a10 (no_action+0x0/0x8 ) [register_console] enable commandline console 0 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 30324k/30676k available (1477k kernel code, 320k reserved, 342k data, 112k init, 0k highmem) totalram_pages= 7589 Calibrating delay loop... 211.35 BogoMIPS (lpj=1056768) loops_per_jiffy=1056768 Mount-cache hash table entries: 512 Checking for 'wait' instruction... available. NET: Registered protocol family 16 Can't analyze prologue code at 9416fc8c Squashfs 2.2-r2b (released 2006/02/23) (C) 2002-2005 Phillip Lougher [avm] configured: watchdog eventled enable shift register enable direct gpio gpio usage: reset=12 clock=13 store=10 data=9 AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: Feb 8 2007 14:30:44) Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled [uart_add_one_port] ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART [uart_add_one_port] dont rigister console port->type = 16 port->cons = 0x941a9680 port->cons->flags = 0x7 [uart_add_one_port] sucess io scheduler noop registered (vor) REG_ADM_LC_PHY_CONTROL_PORT(0x200) = 0x3100 (nach) REG_ADM_LC_PHY_CONTROL_PORT(0x200) = 0x3100 (vor) REG_ADM_LC_PHY_CONTROL_PORT(0x220) = 0x3100 (nach) REG_ADM_LC_PHY_CONTROL_PORT(0x220) = 0x3100 (vor) REG_ADM_LC_PHY_CONTROL_PORT(0x240) = 0x3100 (nach) REG_ADM_LC_PHY_CONTROL_PORT(0x240) = 0x3100 (vor) REG_ADM_LC_PHY_CONTROL_PORT(0x260) = 0x3100 (nach) REG_ADM_LC_PHY_CONTROL_PORT(0x260) = 0x3100 (vor) REG_ADM_LC_PHY_CONTROL_PORT(0x280) = 0x3100 (nach) REG_ADM_LC_PHY_CONTROL_PORT(0x280) = 0x3100 cpmac_if_register, dev cpmac0 (phy_id 0) registered cpmac_if_register, phy_id 0 already registered tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky physmap flash device: 400000 at 10000000 phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 phys_mapped_flash: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. RedBoot partition parsing not available Generic platform RAM MTD, (c) 2004 Simtec Electronics Ohio flash driver (size->0x400000 mem->0x10000000) flash_size=0x800000 Ohio flash memory: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 Ohio flash memory: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. [mtd]: set to default: jffs2_size = 0x20 * 64KByte (0x200000 Bytes) [ohio_find_hidden_filesystem]: super block found: bytes_used: 0x4f77b8/5207992 [init_ohio_flash] find hidden filesystem size=0x6d3b00 offset=0xac500 [mtd] configure jffs2 partition [mtd] fs_size=0x5a0000 max=0x1d0000 is=0x200000 max jffs2_size value 29 [mtd] ERROR jffs2_size too big, reduce to max Creating 7 MTD partitions on "Ohio flash memory": 0x000ac500-0x00780000 : "filesystem" 'nor-flash' 'Bits can be cleared (flash)' 'Has an erase function' mtd: partition "filesystem" doesn't start on an erase block boundary -- force read-only 0x00010000-0x00780000 : "kernel" 'nor-flash' 'Bits can be cleared (flash)' 'Has an erase function' 0x00000000-0x00010000 : "bootloader" 'nor-flash' 'Bits can be cleared (flash)' 'Has an erase function' 'Virtual blocks not allowed' 0x00780000-0x007c0000 : "tffs (1)" 'nor-flash' 'Bits can be cleared (flash)' 'Has an erase function' 'Virtual blocks not allowed' 0x007c0000-0x00800000 : "tffs (2)" 'nor-flash' 'Bits can be cleared (flash)' 'Has an erase function' 'Virtual blocks not allowed' 0x005b0000-0x00780000 : "jffs2" 'nor-flash' 'Bits can be cleared (flash)' 'Has an erase function' 'Virtual blocks not allowed' 0x00010000-0x005b0000 : "Kernel without jffs2" 'nor-flash' 'Bits can be cleared (flash)' 'Has an erase function' 'Virtual blocks not allowed' capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) capifs: Rev 1.1.2.3 NET: Registered protocol family 2 IP route cache hash table entries: 512 (order: -1, 2048 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered TCP bic registered mcfw_init: ok NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 [setup_irq]: irq 1 irqaction->handler 0x94001664 (dummy_timer_irq+0x0/0x14 ) [setup_irq]: irq 6 irqaction->handler 0x94001678 (dummy_system_irq_2+0x0/0x18 ) [ohio_late_init] [ohio_set_clock_notify] avm_clock_id_system notify disable 0x9400169c 0x94279e48 [ohio_set_clock_notify] avm_clock_id_system notify enable 0x9400169c 0x94279e48 [tffs] alloc_chrdev_region() param=mtd4 [tffs] CONFIG_TFFS_MTD_DEVICE_0=4 CONFIG_TFFS_MTD_DEVICE_1=5 [tffs] Character device init successfull TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0) mount on mtd4 and mtd5 (double buffering) Adam2 environment variables API installed. tffsd: wait for events [prepare_namespace] new mount root /dev/mtdblock1 use lzma compression VFS: Mounted root (squashfs filesystem) readonly. Freeing prom memory: 0kb freed Freeing unused kernel memory: 112k freed (7617 free) [setup_irq]: irq 15 irqaction->handler 0x940cf534 (serial8250_interrupt+0x0/0x128 ) init started: BusyBox v1.5.1 (2007-07-03 23:22:28 CEST) multi-call binary rootdir=/ table='/etc/device.table' AR7WDT: System Init UEberwachung 120 Sekunden TFFS Name Table 8 HWRevision 101.1.1.0 ProductID Fritz_Box_SpeedportW701V SerialNumber 0000000000000000 annex B autoload yes bootloaderVersion 1.203 bootserport tty0 bluetooth cpufrequency 211968000 firstfreeaddress 0x946B1D78 firmware_version tcom firmware_info 33.04.26 flashsize 0x00800000 maca 00:1A:4F:D8:52:FF macb 00:1A:4F:D8:53:00 macwlan 00:1A:4F:D8:53:01 macdsl 00:1A:4F:D8:53:02 memsize 0x02000000 modetty0 38400,n,8,1,hw modetty1 38400,n,8,1,hw mtd0 0x90000000,0x90000000 mtd1 0x90010000,0x90780000 mtd2 0x90000000,0x90010000 mtd3 0x90780000,0x907C0000 mtd4 0x907C0000,0x90800000 my_ipaddress 192.168.178.1 prompt AVM_Ar7 ptest reserved req_fullrate_freq 125000000 sysfrequency 125000000 urlader-version 1203 usb_board_mac 00:1A:4F:D8:53:03 usb_rndis_mac 00:1A:4F:D8:53:04 usb_device_id 0x0000 usb_revision_id 0x0000 usb_device_name USB DSL Device usb_manufacturer_name AVM wlan_key 0719550738185830 wlan_cal 0024,03E4,0028,00E6,010A,00E7,010A,0352,0339 HWRevision='101' HWRevision_ATA='1' HWRevision_BitFileCount='1' HWRevision_Reserved1='0' ANNEX='B' OEM='tcom' OEM_DEFAULT_INDEX='' OEM_tmp='tcom' Language='de' Country='049' TZ='CET-1CEST,M3.5.0,M10.5.0' CONFIG_AB_COUNT='2' CONFIG_ANNEX='B' CONFIG_ASSIST='y' CONFIG_ATA='y' CONFIG_ATA_FULL='n' CONFIG_AUDIO='n' CONFIG_AURA='n' CONFIG_BLUETOOTH='n' CONFIG_BLUETOOTH_CTP='n' CONFIG_BUTTON='y' CONFIG_CAPI='y' CONFIG_CAPI_MIPS='n' CONFIG_CAPI_NT='n' CONFIG_CAPI_POTS='y' CONFIG_CAPI_TE='y' CONFIG_CAPI_UBIK='n' CONFIG_CAPI_XILINX='y' CONFIG_CDROM='n' CONFIG_CDROM_FALLBACK='n' CONFIG_DECT='n' CONFIG_DSL='y' CONFIG_ENVIRONMENT_PATH='/proc/sys/urlader' CONFIG_ETH_COUNT='4' CONFIG_FIRMWARE_URL='http://www.telekom.de/faq' CONFIG_FON='y' CONFIG_HOMEI2C='n' CONFIG_HOSTNAME='speedport.ip' CONFIG_I2C='n' CONFIG_INSTALL_TYPE='ar7_8MB_xilinx_4eth_2ab_isdn_pots_wlan_13200' CONFIG_JFFS2='n' CONFIG_LED_NO_DSL_LED='n' CONFIG_MAILER='n' CONFIG_MEDIACLI='n' CONFIG_MEDIASRV='n' CONFIG_NAND='n' CONFIG_NFS='n' CONFIG_OEM_DEFAULT='tcom' CONFIG_PRODUKT='Fritz_Box_SpeedportW701V' CONFIG_PRODUKT_NAME='Speedport W 701V' CONFIG_RAMSIZE='32' CONFIG_ROMSIZE='8' CONFIG_SERVICEPORTAL_URL='none' CONFIG_STOREUSRCFG='n' CONFIG_SUBVERSION='ds26-pre16-878M' CONFIG_TAM='n' CONFIG_TAM_MODE='0' CONFIG_TR069='y' CONFIG_UBIK2='n' CONFIG_UPNP='n' CONFIG_USB='n' CONFIG_USB_HOST_AVM='n' CONFIG_USB_HOST_TI='n' CONFIG_USB_PRINT_SERV='n' CONFIG_USB_STORAGE='n' CONFIG_USB_WLAN_AUTH='n' CONFIG_VDSL='n' CONFIG_VERSION='04.26' CONFIG_VERSION_MAJOR='33' CONFIG_VLYNQ='y' CONFIG_VLYNQ0='0' CONFIG_VLYNQ1='0' CONFIG_VPN='n' CONFIG_WLAN='y' CONFIG_WLAN_1130TNET='n' CONFIG_WLAN_1350TNET='y' CONFIG_WLAN_GREEN='n' CONFIG_WLAN_WDS='y' CONFIG_XILINX='y' set 'Activate Wizzard' mknod: /var/flash/ar7.cfg: File exists Loading /var/flash/ds_mod...done. Loading passwords...done. Loading hosts...done. Loading config...done. Loading modules...done. cp /etc/default.049/fx_moh.default /var/fx_moh Piglet: module license ' (C) Copyright 2005 by AVM ' taints kernel. attempting to load DSL Firmware '/lib/modules/microvoip- dsl.bin' **** ANNEX: 'B' ************************************* setting DSL Firmware to Annex B registered device TI Avalanche SAR tiatm driver (patch_annex=0xc00519ec) [tiatm] Set StrictPriority=0 DSP binary filesize = 303784 bytes [setup_irq]: irq 23 irqaction->handler 0xc003920c (tn7atm_sar_irq+0x0/0x30 [tiatm] ) [setup_irq]: irq 31 irqaction->handler 0xc003923c (tn7atm_dsl_irq+0x0/0x28 [tiatm] ) [tiatm]: Powermanagment (States => 1,3,10) supported! Texas Instruments ATM driver: version:[4.06.04.30] ubik2 driver (ubik2 - 0x10=0xc00646b4) atm_dsp_register_ubik2: ubik2_ToMIPS_notify=0xc0055c00 atm_dsp_register_ubik2: dsp mem pointer 0xa1c0f218 ubik2_init_interface: DSP-Link Version v3 8480 isdn_fbox: Loading... isdn_fbox: Driver 'isdn_fbox' attached to stack isdn_fbox: CAPI driver registered. isdn_fbox: AVM F!Box expected @ port 0x0000, irq 0 isdn_fbox: Loading... isdn_fbox: Stack version 3.11-07 isdn_fbox: D-channel 0: DSS1 isdn_fbox: D-channel 1: DSS1 isdn_fbox: D-channel 2: DSS1_N isdn_fbox: D-channel 3: POTS isdn_fbox: D-channel 4: SIP isdn_fbox: Loaded. kdsldmod: init start kdsld: cache_create(datapipe) kdsld: cache_create(datapipe_mod) kdsld: cache_create(ipaccessset) kdsld: cache_create(ipaccessrule) kdsld: cache_create(ipfragid) kdsld: cache_create(ipmasqentry) kdsld: cache_create(ipmasqfwinfo) kdsld: cache_create(ipmasqigdpm) kdsld: cache_create(ipmasqappldata) kdsld: cache_create(ipmasqmcgroup) kdsld: cache_create(dnsmasqentry) kdsld: cache_create(dnsstaticentry) kdsld: cache_create(pingerentry) kdsld: cache_create(pingerwaiter) kdsld: cache_create(iprouteset) kdsld: DATAPIPE: with header optimization kdsldmod: init done kdsld: PPP led: off (value=0) 2000-01-01 01:00:18 cltmgr: csock: using poll Jan 1 01:00:18 cltmgr[420]: csock: using poll 2000-01-01 01:00:19 cltmgr: avmssl_init: done Jan 1 01:00:19 cltmgr[420]: avmssl_init: done 2000-01-01 01:00:19 cltmgr: process priority is 19 Jan 1 01:00:19 cltmgr[420]: process priority is 19 MAC WLAN: 00:1A:4F:D8:53:01 Jan 1 01:00:20 cltmgr[422]: TR-069 is NOT ACTIVATED in tr069.cfg Jan 1 01:00:21 cltmgr[422]: mapping to info-LED already exist Jan 1 01:00:21 cltmgr[422]: box init ok Jan 1 01:00:21 cltmgr[422]: FactoryDefault=/etc/default/tcom/stat.cfg (stat) Jan 1 01:00:21 cltmgr[422]: /etc/default/tcom/stat.cfg: is empty Jan 1 01:00:21 cltmgr[422]: load_config(stat): file empty - factory default loaded Jan 1 01:00:21 cltmgr[422]: Statistic load_config failed Jan 1 01:00:21 cltmgr[422]: dlopen(/usr/share/ctlmgr/libdect.so) failed: File not found Jan 1 01:00:21 cltmgr[422]: dlopen(/usr/share/ctlmgr/libtamconf.so) failed: File not found [speedup] disable Jan 1 01:00:21 cltmgr[422]: dlopen(/usr/share/ctlmgr/libvdsl.so) failed: File not found Jan 1 01:00:21 cltmgr[422]: WAN (ata) led value = 0 Jan 1 01:00:21 cltmgr[422]: TR069_Init() TR069_Init(assi-only) Jan 1 01:00:21 cltmgr[422]: TR069_Init returned 0 Jan 1 01:00:21 cltmgr[422]: TR069_Init(lite mode) returned 0 Jan 1 01:00:21 cltmgr[422]: verbose: DISABLED WSTART (Jul 6 2006 15:38:07)wstart: config ok(1) wpa auth:waiting for driver to come up... Wstart - made configure_wpa_authenticator [Wstart] wlan_cal ist gesetzt: NVS DATEI WIRD MIT KALIBRIERUNGSWERTEN GEPATCHT!!! [Wstart] 9 Parameter werden gepatcht: [Wstart] NVS DATEI WURDE GEPATCHT. NVS File loaded. 429493966: Configuration succeeded !!! [ohio_vlynq_init] device 0 [ohio_vlynq_startup_link] [setup_irq]: irq 29 irqaction->handler 0x94004f2c (vlynq_interrupt+0x0/0x34 ) [setup_irq]: irq 79 irqaction->handler 0xc02d7a10 (whal_acxIntrHandler+0x0/0x1e8 [tiap] ) 429493973: 429493996: WDRV_MAINSM: WLAN Driver initialized successfully 429493996: FW Watchdog is Enabled dda: tiwlan0 in initializing Succeeded wireless extensions: ret = 0 wlan started (OK) Wstart - made configure_and_start_ap_driver WSTART: done(0) WLAN is enabled tiwlan0 device is activated wdsup0 device is activated wdsdw0 device is activated wdsdw1 device is activated wdsdw2 device is activated wdsdw3 device is activated Jan 1 01:00:28 websrv[451]: csock: using poll Jan 1 01:00:29 igdd[455]: csock: using poll Jan 1 01:00:29 igdd[455]: avmssl_init: done 2000-01-01 01:00:30 multid: startup (Aug 31 2006 17:10:44) Jan 1 01:00:30 multid[458]: startup (Aug 31 2006 17:10:44) 2000-01-01 01:00:30 multid: csock: using poll Jan 1 01:00:30 multid[458]: csock: using poll 2000-01-01 01:00:30 multid: avmssl_init: done Jan 1 01:00:30 multid[458]: avmssl_init: done 2000-01-01 01:00:30 dsld: csock: using poll Jan 1 01:00:30 dsld[462]: csock: using poll 2000-01-01 01:00:30 dsld: avmssl_init: done Jan 1 01:00:30 dsld[462]: avmssl_init: done 2000-01-01 01:00:30 dsld: startup (Jul 6 2006 15:37:07) Jan 1 01:00:30 dsld[462]: startup (Jul 6 2006 15:37:07) 2000-01-01 01:00:30 dsld: new cpmac driver detected Jan 1 01:00:30 dsld[462]: new cpmac driver detected /etc/init.d/rc.net: line 1: avmike: not found Jan 1 01:00:31 multid[[setup_irq]: irq 27 irqaction->handler 0x940e016c (460cpmac_main_isr+0x0/0x78 ]:) new cpmac driver detected Jan 1 01:00:31 multid[460]: enabling non-ATA-Mode Jan 1 01:00:31 multid[46CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == c02579d0, c 0]Oops in arch/mips/mm/fault.c::do_page_fault, line 166[#1]: Cpu 0 $ 0 : 00000000 00000066 00000001 9494bf60 $ 4 : 9494b421 c027f0e5 00000000 0000000c $ 8 : 00707472 9494bf68 00000000 94261810 $12 : ffffffff c0259634 00200200 00100100 $16 : 9494b440 00000008 9494b420 953cf500 $20 : 00000000 9494bfc0 00420000 10000050 $24 : 00000000 c0257dcc $28 : 94800000 94801c68 10000000 c025794c Hi : 00000000 Lo : 00000ec0 epc : c02579d0 CTrafficShaperConfigBuilder_SetCompiledFilter+0xe0/0x164 [kdsldmod] Tainted: P ra : c025794c CTrafficShaperConfigBuilder_SetCompiledFilter+0x5c/0x164 [kdsldmod] Status: 1000ce03 KERNEL EXL IE Cause : 30800008 BadVA : 00000000 PrId : 00018448 Modules linked in: tiap kdsldmod isdn_fbox ubik2 tiatm Piglet Process dsld (pid: 464, threadinfo=94800000, task=94f3a060) Stack : 9494bee0 00000000 00000000 c02546c8 9494b440 00000008 9494bf60 953cf500 9494b460 c0257d1c 0000000b c0257b04 95fba800 c026f544 00000000 9494b460 9494bfc0 9494b520 00000004 2aab06b0 c0257ee4 c0257e50 c029d8bc 9494b560 c0259364 c025a2e0 9494b520 00000000 c02a89f0 c02b0000 c026b678 c026b660 94801d00 c0259708 94029240 94029240 94301540 00000000 00000000 0000000f ... Call Trace: [] limiterchain_new+0x24/0x8c [kdsldmod] [] CTrafficShaperConfigBuilder_MakeChainFromConf+0xd8/0x188 [kdsldmod] [] CTrafficShaperConfigBuilder_MakeLimiterFromConf+0x64/0x1a4 [kdsldmod] [] CTrafficShaperBuilder_AddLimiterToLink+0x24/0x7c [kdsldmod] [] CTrafficShaperConfigBuilder_Build+0x118/0x174 [kdsldmod] [] CTrafficShaperConfigBuilder_Build+0x84/0x174 [kdsldmod] [] copy_members_from_user+0x54/0x84 [kdsldmod] [] config_allocstruct_no_defaults+0x30/0xbc [kdsldmod] [] wdrv_dbSetStationRates+0x22c/0x4a0 [tiap] [] trafficshaper_create_and_configure+0x74/0x1e0 [kdsldmod] [] trafficshaper_create_and_configure+0x5c/0x1e0 [kdsldmod] [] copy_struct_from_user+0xd4/0x174 [kdsldmod] [<94029240>] do_softirq+0x58/0x8c [<94029240>] do_softirq+0x58/0x8c [] config_copystruct_from_user+0x98/0xac [kdsldmod] [] kdsld_ioctl+0x20e0/0x21ac [kdsldmod] [<94041be4>] __do_IRQ+0xf4/0x160 [<94001508>] ohio_hw0_irqdispatch+0xd8/0xec [<941e0000>] ip_auto_config+0x3b0/0x1140 [<94000f88>] mips_irq_check_hw_interrupt_0+0x10/0x18 [<94011b9c>] r4k_flush_icache_page+0x1d4/0x1f4 [<941e0000>] ip_auto_config+0x3b0/0x1140 [<940200bc>] __wake_up+0x40/0x7c [<9402961c>] tasklet_action+0x88/0xdc [<94029240>] do_softirq+0x58/0x8c [<9402915c>] __do_softirq+0x6c/0xf8 [<94029138>] __do_softirq+0x48/0xf8 [<94029240>] do_softirq+0x58/0x8c [<94000f88>] mips_irq_check_hw_interrupt_0+0x10/0x18 [<94072474>] do_ioctl+0x64/0x78 [<940727c4>] vfs_ioctl+0x33c/0x35c [<94072834>] sys_ioctl+0x50/0x8c [<9400ce20>] stack_done+0x20/0x3c [<9400cdec>] handle_sys+0xac/0xc0 Code: 08095e8d ae600018 ae620018 <8e910000> 3c029405 24050020 2442c2c4 0040f809 02202021 : Kernel panic - not syncing: Aiee, killing interrupt handler! no rm<0>Rebooting in 5 seconds..al Jan 1 01:00:31 dsld[464]: DSL Mac 00:1a:4f:d8:53:02 Jan 1 01:00:31 dsld[464]: VOIP Mac 00:1a:4f:d8:53:03 Jan 1 01:00:31 dsld[464]: voip: ppptarget voip disabled, ignored CTRL-A Z for help | 38400 8N1 | NOR | Minicom 2.2 | VT102 | Offline