pport... done. [ 10.464594] Initializing CPU#0 [ 10.464658] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 10.464753] Console: colour dummy device 80x25 [ 10.465217] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 10.465863] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.557637] Memory: 2064652k/2096576k available (6088k kernel code, 30696k reserved, 2345k data, 516k init, 1179072k highmem) [ 10.557649] virtual kernel memory layout: [ 10.557651] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 10.557652] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 10.557653] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 10.557654] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 10.557656] .init : 0xc0947000 - 0xc09c8000 ( 516 kB) [ 10.557657] .data : 0xc06f208d - 0xc093c7a0 (2345 kB) [ 10.557658] .text : 0xc0100000 - 0xc06f208d (6088 kB) [ 10.557661] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 10.617268] Calibrating delay using timer specific routine.. 5322.82 BogoMIPS (lpj=2661414) [ 10.617314] Security Framework v1.0.0 initialized [ 10.617320] SELinux: Initializing. [ 10.617337] SELinux: Starting in permissive mode [ 10.617343] selinux_register_security: Registering secondary module capability [ 10.617346] Capability LSM initialized as secondary [ 10.617362] Mount-cache hash table entries: 512 [ 10.617501] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [ 10.617514] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 10.617517] CPU: L2 cache: 512K [ 10.617519] CPU: Hyper-Threading is disabled [ 10.617522] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00004400 00000000 00000000 [ 10.617531] Intel machine check architecture supported. [ 10.617536] Intel machine check reporting enabled on CPU#0. [ 10.617539] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available [ 10.617543] CPU0: Thermal monitoring enabled [ 10.617551] Compat vDSO mapped to ffffe000. [ 10.617564] Checking 'hlt' instruction... OK. [ 10.621618] SMP alternatives: switching to UP code [ 10.622085] Freeing SMP alternatives: 27k freed [ 10.622089] ACPI: Core revision 20060707 [ 10.639261] CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09 [ 10.639301] Total of 1 processors activated (5322.82 BogoMIPS). [ 10.639435] ENABLING IO-APIC IRQs [ 10.639624] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 10.750961] Brought up 1 CPUs [ 10.751277] NET: Registered protocol family 16 [ 10.751441] No dock devices found. [ 10.751450] EISA bus registered [ 10.751454] ACPI: bus type pci registered [ 10.753006] PCI: PCI BIOS revision 2.10 entry at 0xfd972, last bus=2 [ 10.753008] PCI: Using configuration type 1 [ 10.753010] Setting up standard PCI resources [ 10.762483] ACPI: Interpreter enabled [ 10.762487] ACPI: Using IOAPIC for interrupt routing [ 10.763295] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 10.763303] PCI: Probing PCI hardware (bus 00) [ 10.765157] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 10.765162] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 10.765399] Boot video device is 0000:01:00.0 [ 10.765701] PCI: Transparent bridge - 0000:00:1e.0 [ 10.765761] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') [ 10.765764] Please report the result to linux-kernel to fix this permanently [ 10.765786] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 10.770343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 10.770676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 10.771704] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 11 14 15) *5 [ 10.771953] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 11 14 15) [ 10.772173] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *10 11 14 15) [ 10.772391] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15) [ 10.772622] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *4 [ 10.772858] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled. [ 10.773094] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled. [ 10.773319] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 *11 14 15) [ 10.776828] Linux Plug and Play Support v0.97 (c) Adam Belay [ 10.776844] pnp: PnP ACPI init [ 10.785124] pnp: PnP ACPI: found 10 devices [ 10.785129] PnPBIOS: Disabled by ACPI PNP [ 10.785296] SCSI subsystem initialized [ 10.785326] libata version 2.00 loaded. [ 10.785403] usbcore: registered new interface driver usbfs [ 10.785440] usbcore: registered new interface driver hub [ 10.785478] usbcore: registered new device driver usb [ 10.785518] PCI: Using ACPI for IRQ routing [ 10.785522] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 10.790785] NetLabel: Initializing [ 10.790788] NetLabel: domain hash size = 128 [ 10.790790] NetLabel: protocols = UNLABELED CIPSOv4 [ 10.790805] NetLabel: unlabeled traffic allowed by default [ 10.791330] ieee1394: Initialized config rom entry `ip1394' [ 10.791457] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 19 (level, low) -> IRQ 16 [ 10.841601] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d2005000-d20057ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 10.841663] PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0 [ 10.841669] PCI: Bridge: 0000:00:01.0 [ 10.841671] IO window: disabled. [ 10.841677] MEM window: d1000000-d1ffffff [ 10.841687] PREFETCH window: e0000000-efffffff [ 10.841695] PCI: Bus 3, cardbus bridge: 0000:02:01.0 [ 10.841698] IO window: 00003400-000034ff [ 10.841702] IO window: 00003800-000038ff [ 10.841707] PREFETCH window: 88000000-8bffffff [ 10.841712] MEM window: 90000000-93ffffff [ 10.841716] PCI: Bridge: 0000:00:1e.0 [ 10.841720] IO window: 3000-3fff [ 10.841726] MEM window: d2000000-d23fffff [ 10.841730] PREFETCH window: 88000000-8bffffff [ 10.841747] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 10.841765] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 10.841796] NET: Registered protocol family 2 [ 10.850738] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 10.850907] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 10.851508] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 10.851870] TCP: Hash tables configured (established 131072 bind 65536) [ 10.851873] TCP reno registered [ 10.854834] checking if image is initramfs... it is [ 11.138833] Freeing initrd memory: 3983k freed [ 11.139028] Simple Boot Flag at 0x36 set to 0x1 [ 11.139079] Machine check exception polling timer started. [ 11.139357] audit: initializing netlink socket (disabled) [ 11.139371] audit(1185466962.857:1): initialized [ 11.139425] highmem bounce pool size: 64 pages [ 11.139429] Total HugeTLB memory allocated, 0 [ 11.139495] VFS: Disk quotas dquot_6.5.1 [ 11.139515] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 11.139586] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher [ 11.139601] Coda Kernel/Venus communications, v5.3.20, coda@cs.cmu.edu [ 11.139879] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 11.140093] NTFS driver 2.1.28 [Flags: R/W]. [ 11.140128] QNX4 filesystem 0.2.3 registered. [ 11.140131] fuse init (API version 7.8) [ 11.140211] JFS: nTxBlock = 8192, nTxLock = 65536 [ 11.143741] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 11.143965] SGI XFS Quota Management subsystem [ 11.144007] SELinux: Registering netfilter hooks [ 11.149957] io scheduler noop registered [ 11.149961] io scheduler anticipatory registered [ 11.149963] io scheduler deadline registered [ 11.149981] io scheduler cfq registered (default) [ 11.183958] lp: driver loaded but no devices found [ 11.184049] Real Time Clock Driver v1.12ac [ 11.184106] toshiba: not a supported Toshiba laptop [ 11.184142] intel_rng: FWH not detected [ 11.190035] ppdev: user-space parallel port driver [ 11.190040] Linux agpgart interface v0.101 (c) Dave Jones [ 11.190181] vesafb: framebuffer at 0xe0000000, mapped to 0xf8d00000, using 3072k, total 65536k [ 11.190185] vesafb: mode is 1024x768x16, linelength=2048, pages=1 [ 11.190188] vesafb: protected mode interface info at c000:e4e0 [ 11.190191] vesafb: pmi: set display start = c00ce516, set palette = c00ce580 [ 11.190193] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 11.190209] vesafb: scrolling: redraw [ 11.190212] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 11.229391] Console: switching to colour frame buffer device 128x48 [ 11.267039] fbsplash: console 0 using theme 'sabayon' [ 11.472308] fbsplash: switched splash state to 'on' on console 0 [ 11.472668] fb0: VESA VGA frame buffer device [ 11.472835] ACPI: AC Adapter [ACAD] (on-line) [ 11.472966] ACPI: Battery Slot [BAT1] (battery absent) [ 11.473079] input: Power Button (FF) as /class/input/input0 [ 11.473087] ACPI: Power Button (FF) [PWRF] [ 11.473176] input: Sleep Button (CM) as /class/input/input1 [ 11.473181] ACPI: Sleep Button (CM) [SBTN] [ 11.473245] input: Lid Switch as /class/input/input2 [ 11.473248] ACPI: Lid Switch [LID] [ 11.473398] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 11.473454] Using specific hotkey driver [ 11.473532] ACPI: CPU0 (power states: C1[C1] C3[C3]) [ 11.473537] ACPI: Processor [CPU0] (supports 8 throttling states) [ 11.483665] ACPI: Thermal Zone [THRM] (46 C) [ 11.483693] ibm_acpi: ec object not found [ 11.483720] isapnp: Scanning for PnP cards... [ 11.795922] isapnp: No Plug & Play device found [ 11.795927] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 11.796272] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 11.796783] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 11.796840] parport: PnPBIOS parport detected. [ 11.796935] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 1.302000] lp0: using parport0 (interrupt-driven). [ 1.519000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508b0880006fd1] [ 4.313000] floppy0: no floppy controllers found [ 4.313000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize [ 4.313000] loop: loaded (max 8 devices) [ 4.313000] Compaq SMART2 Driver (v 2.6.0) [ 4.313000] HP CISS Driver (v 3.6.14) [ 4.314000] v2.3 : Micro Memory(tm) PCI memory board block driver [ 4.314000] MM: desc_per_page = 128 [ 4.314000] Loading iSCSI transport class v2.0-724. [ 4.314000] iscsi: registered transport (tcp) [ 4.315000] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 4.315000] Detecting Adaptec I2O RAID controllers... [ 4.315000] Adaptec aacraid driver (1.1-5[2423]-mh3) [ 4.315000] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.2 loaded [ 4.315000] NCR53c406a: no available ports found [ 4.315000] sym53c416.c: Version 1.0.0-ac [ 4.315000] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver [ 4.316000] iscsi: registered transport (qla4xxx) [ 4.316000] QLogic iSCSI HBA Driver [ 4.316000] Emulex LightPulse Fibre Channel SCSI driver 8.1.11 [ 4.316000] Copyright(c) 2004-2006 Emulex. All rights reserved. [ 4.316000] seagate: ST0x/TMC-8xx not detected. [ 4.338000] Failed initialization of WD-7000 SCSI card! [ 4.338000] IBM MCA SCSI: Version 4.0b-ac [ 4.338000] IBM MCA SCSI: No Microchannel-bus present --> Aborting. [ 4.338000] This machine does not have any IBM MCA-bus [ 4.338000] or the MCA-Kernel-support is not enabled! [ 4.355000] DC390: clustering now enabled by default. If you get problems load [ 4.355000] with "disable_clustering=1" and report to maintainers [ 4.355000] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 4.355000] megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) [ 4.355000] megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006 [ 4.355000] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 4.355000] GDT-HA: Found 0 PCI Storage RAID Controllers [ 4.355000] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 4.355000] 3ware 9000 Storage Controller device driver for Linux v2.26.02.008. [ 4.355000] nsp32: loading... [ 4.355000] ipr: IBM Power RAID SCSI Device Driver version: 2.3.0 (November 8, 2006) [ 4.355000] RocketRAID 3xxx SATA Controller driver v1.0 (060426) [ 4.355000] stex: Promise SuperTrak EX Driver version: 3.1.0.1 [ 4.355000] st: Version 20061107, fixed bufsize 32768, s/g segs 256 [ 4.355000] osst :I: Tape driver with OnStream support version 0.99.4 [ 4.355000] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 4.355000] ata_piix 0000:00:1f.1: version 2.00ac7 [ 4.356000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 4.356000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 4.356000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 4.356000] ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x2040 irq 14 [ 4.356000] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2048 irq 15 [ 4.356000] scsi2 : ata_piix [ 4.510000] ata1.00: ATA-6, max UDMA/100, 78140160 sectors: LBA48 [ 4.510000] ata1.00: ata1: dev 0 multi count 16 [ 4.513000] ata1.00: configured for UDMA/100 [ 4.513000] scsi3 : ata_piix [ 4.818000] ata2.00: ATAPI, max MWDMA2 [ 4.972000] ata2.00: configured for MWDMA2 [ 4.972000] scsi 2:0:0:0: Direct-Access ATA IC25N040ATMR04-0 MO2O PQ: 0 ANSI: 5 [ 4.972000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4.972000] sda: Write Protect is off [ 4.972000] sda: Mode Sense: 00 3a 00 00 [ 4.972000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.972000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 4.972000] sda: Write Protect is off [ 4.972000] sda: Mode Sense: 00 3a 00 00 [ 4.972000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.972000] sda: sda1 sda2 sda3 [ 5.006000] sd 2:0:0:0: Attached scsi disk sda [ 5.006000] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 5.007000] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD+RW GCA-4040N 1.15 PQ: 0 ANSI: 5 [ 5.011000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 5.011000] Uniform CD-ROM driver Revision: 3.20 [ 5.011000] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 5.011000] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 5.013000] I2O subsystem v1.325 [ 5.013000] i2o: max drivers = 8 [ 5.013000] I2O Configuration OSM v1.323 [ 5.013000] I2O Bus Adapter OSM v1.317 [ 5.013000] I2O Block Device OSM v1.325 [ 5.013000] I2O SCSI Peripheral OSM v1.316 [ 5.013000] I2O ProcFS OSM v1.316 [ 5.013000] Fusion MPT base driver 3.04.03 [ 5.013000] Copyright (c) 1999-2007 LSI Logic Corporation [ 5.013000] Fusion MPT SPI Host driver 3.04.03 [ 5.013000] Fusion MPT FC Host driver 3.04.03 [ 5.013000] Fusion MPT SAS Host driver 3.04.03 [ 5.013000] Fusion MPT misc device (ioctl) driver 3.04.03 [ 5.013000] mptctl: Registered with Fusion MPT base driver [ 5.013000] mptctl: /dev/mptctl @ (major,minor=10,220) [ 5.013000] Fusion MPT LAN driver 3.04.03 [ 5.013000] usbcore: registered new interface driver usblp [ 5.013000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 5.013000] Initializing USB Mass Storage driver... [ 5.013000] usbcore: registered new interface driver usb-storage [ 5.013000] USB Mass Storage support registered. [ 5.014000] usbcore: registered new interface driver libusual [ 5.014000] usbcore: registered new interface driver hiddev [ 5.014000] usbcore: registered new interface driver usbhid [ 5.014000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 5.014000] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 5.017000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.017000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.017000] parport0: cannot grant exclusive access for device parkbd [ 5.017000] mice: PS/2 mouse device common for all mice [ 5.049000] input: AT Translated Set 2 keyboard as /class/input/input3 [ 5.664000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb1, caps: 0xa04711/0xa [ 5.703000] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 5.706000] md: linear personality registered for level -1 [ 5.706000] md: raid0 personality registered for level 0 [ 5.706000] md: raid1 personality registered for level 1 [ 5.706000] md: raid10 personality registered for level 10 [ 5.723000] raid6: int32x1 796 MB/s [ 5.740000] raid6: int32x2 847 MB/s [ 5.757000] raid6: int32x4 726 MB/s [ 5.774000] raid6: int32x8 507 MB/s [ 5.791000] raid6: mmxx1 2085 MB/s [ 5.808000] raid6: mmxx2 2316 MB/s [ 5.825000] raid6: sse1x1 1187 MB/s [ 5.842000] raid6: sse1x2 1890 MB/s [ 5.859000] raid6: sse2x1 1832 MB/s [ 5.876000] raid6: sse2x2 2625 MB/s [ 5.876000] raid6: using algorithm sse2x2 (2625 MB/s) [ 5.876000] md: raid6 personality registered for level 6 [ 5.876000] md: raid5 personality registered for level 5 [ 5.876000] md: raid4 personality registered for level 4 [ 5.876000] raid5: automatically using best checksumming function: pIII_sse [ 5.881000] pIII_sse : 3480.000 MB/sec [ 5.881000] raid5: using function: pIII_sse (3480.000 MB/sec) [ 5.881000] md: multipath personality registered for level -4 [ 5.881000] md: faulty personality registered for level -5 [ 5.881000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 5.881000] EISA: Probing bus 0 at eisa.0 [ 5.881000] Cannot allocate resource for EISA slot 1 [ 5.881000] Cannot allocate resource for EISA slot 2 [ 5.881000] Cannot allocate resource for EISA slot 3 [ 5.881000] EISA: Detected 0 cards. [ 5.881000] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 5.911000] Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC). [ 5.911000] specify port [ 5.911000] snd_cs4231: probe of snd_cs4231.0 failed with error -22 [ 5.911000] ALSA device list: [ 5.911000] No soundcards found. [ 5.912000] TCP bic registered [ 5.912000] NET: Registered protocol family 1 [ 5.912000] NET: Registered protocol family 17 [ 5.912000] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available [ 5.912000] Using IPI No-Shortcut mode [ 5.912000] Suspend v2.2.9.3 [ 5.912000] Suspend2 Checksumming support registered. [ 5.912000] Suspend2 Userspace Storage Manager support registered. [ 5.912000] Suspend2 Userspace UI support registered. [ 5.912000] Suspend2 Compressor support registered. [ 5.912000] Suspend2 Encryptor support registered. [ 5.912000] Suspend2 Block I/O support registered. [ 5.912000] Suspend2 Swap Allocator support registered. [ 5.912000] Suspend2 File Allocator support registered. [ 5.912000] ACPI: (supports S0 S3 S4 S5) [ 5.912000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 5.913000] Time: tsc clocksource has been installed. [ 5.913000] Freeing unused kernel memory: 516k freed [ 5.915000] Time: acpi_pm clocksource has been installed. [ 6.261000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 [ 6.261000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 6.261000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.261000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 6.261000] ehci_hcd 0000:00:1d.7: debug port 1 [ 6.261000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 6.261000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd0000000 [ 6.265000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.265000] usb usb1: configuration #1 chosen from 1 choice [ 6.265000] hub 1-0:1.0: USB hub found [ 6.265000] hub 1-0:1.0: 6 ports detected [ 6.403000] USB Universal Host Controller Interface driver v3.0 [ 6.403000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 6.403000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 6.403000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.403000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 6.403000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001cc0 [ 6.403000] usb usb2: configuration #1 chosen from 1 choice [ 6.403000] hub 2-0:1.0: USB hub found [ 6.403000] hub 2-0:1.0: 2 ports detected [ 6.504000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 16 [ 6.504000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 6.504000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.504000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 6.504000] uhci_hcd 0000:00:1d.1: irq 16, io base 0x00001ce0 [ 6.504000] usb usb3: configuration #1 chosen from 1 choice [ 6.504000] hub 3-0:1.0: USB hub found [ 6.504000] hub 3-0:1.0: 2 ports detected [ 6.605000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 6.605000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 6.605000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 6.605000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 6.605000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002000 [ 6.605000] usb usb4: configuration #1 chosen from 1 choice [ 6.605000] hub 4-0:1.0: USB hub found [ 6.605000] hub 4-0:1.0: 2 ports detected [ 6.731000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 6.759000] sl811: driver sl811-hcd, 19 May 2005 [ 6.811000] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 6.887000] Registering unionfs 20060916-2203 [ 6.887000] unionfs: debugging is not enabled [ 6.917000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2 [ 6.917000] Copyright (c) 1999-2006 Intel Corporation. [ 6.975000] usb 3-1: configuration #1 chosen from 1 choice [ 7.006000] input: Logitech USB Receiver as /class/input/input5 [ 7.006000] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1 [ 7.039000] input: Logitech USB Receiver as /class/input/input6 [ 7.039000] input,hiddev0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1 [ 8.277000] Suspend2: SwapAllocator: Signature found. [ 8.277000] Suspend2: Resuming enabled. [ 8.277000] Suspend2: Normal swapspace found. [ 8.283000] EXT3-fs: INFO: recovery required on readonly filesystem. [ 8.283000] EXT3-fs: write access will be enabled during recovery. [ 12.275000] kjournald starting. Commit interval 5 seconds [ 12.275000] EXT3-fs: recovery complete. [ 12.277000] EXT3-fs: mounted filesystem with ordered data mode. [ 17.666000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 17.749000] agpgart: Detected an Intel 865 Chipset. [ 17.755000] agpgart: AGP aperture is 128M @ 0xd8000000 [ 17.772000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.816000] input: PC Speaker as /class/input/input7 [ 17.911000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 17.911000] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 17.928000] iTCO_vendor_support: vendor-support=0 [ 17.939000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 17.939000] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060) [ 17.939000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 17.953000] i8xx TCO timer: I/O address 0x1060 already in use [ 18.263000] MC'97 0 converters and GPIO not ready (0x1) [ 18.263000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 18.263000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 18.545000] NET: Registered protocol family 23 [ 18.572000] intel8x0_measure_ac97_clock: measured 50054 usecs [ 18.572000] intel8x0: clocking to 48000 [ 18.823000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 18.824000] 8139cp 0000:02:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 18.824000] 8139cp 0000:02:00.0: Try the "8139too" driver instead. [ 18.841000] 8139too Fast Ethernet driver 0.9.28 [ 18.841000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 18.842000] eth0: RealTek RTL8139 at 0xf9062800, 00:c0:9f:2b:35:c6, IRQ 21 [ 18.842000] eth0: Identified 8139 chip type 'RTL-8101' [ 18.931000] Yenta: CardBus bridge found at 0000:02:01.0 [103c:006a] [ 18.931000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 18.931000] Yenta: Routing CardBus interrupts to PCI [ 18.931000] Yenta TI: socket 0000:02:01.0, mfunc 0x00221c02, devctl 0x44 [ 19.022000] nsc-ircc, chip->init [ 19.022000] nsc-ircc, Found chip at base=0x02e [ 19.022000] nsc-ircc, driver loaded (Dag Brattli) [ 19.022000] nsc_ircc_open(), can't get iobase of 0x2f8 [ 19.022000] nsc-ircc, Found chip at base=0x02e [ 19.023000] nsc-ircc, driver loaded (Dag Brattli) [ 19.023000] nsc_ircc_open(), can't get iobase of 0x2f8 [ 19.023000] pnp: Device 00:09 disabled. [ 19.155000] Yenta: ISA IRQ mask 0x0478, PCI irq 17 [ 19.155000] Socket status: 30000006 [ 19.155000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 19.155000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 19.155000] cs: IO port probe 0x3000-0x3fff: clean. [ 19.155000] pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd23fffff [ 19.155000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 19.506000] nvidia: module license 'NVIDIA' taints kernel. [ 19.760000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 19.760000] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007 [ 19.829000] cs: IO port probe 0x100-0x3af: clean. [ 19.831000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 19.832000] cs: IO port probe 0x820-0x8ff: clean. [ 19.833000] cs: IO port probe 0xc00-0xcf7: clean. [ 19.833000] cs: IO port probe 0xa00-0xaff: clean. [ 24.489000] EXT3 FS on dm-0, internal journal [ 26.644000] kjournald starting. Commit interval 5 seconds [ 26.644000] EXT3 FS on sda2, internal journal [ 26.644000] EXT3-fs: mounted filesystem with ordered data mode. [ 26.694000] Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1048568k [ 37.343000] ttyS1: LSR safety check engaged! [ 39.167000] eth0: link down [ 43.092000] fbsplash: console 1 using theme 'sabayon' [ 43.099000] fbsplash: switched splash state to 'on' on console 1 [ 43.105000] fbsplash: console 2 using theme 'sabayon' [ 43.112000] fbsplash: switched splash state to 'on' on console 2 [ 43.221000] fbsplash: console 3 using theme 'sabayon' [ 43.227000] fbsplash: switched splash state to 'on' on console 3 [ 43.275000] fbsplash: console 4 using theme 'sabayon' [ 43.281000] fbsplash: switched splash state to 'on' on console 4 [ 43.329000] fbsplash: console 5 using theme 'sabayon' [ 43.336000] fbsplash: switched splash state to 'on' on console 5 [ 43.341000] fbsplash: console 11 using theme 'sabayon' [ 43.347000] fbsplash: switched splash state to 'on' on console 11 [ 46.830000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 46.830000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 46.830000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 127.978000] synaptics: using relaxed packet validation [ 130.368000] NET: Registered protocol family 10 [ 130.368000] lo: Disabled Privacy Extensions [ 130.368000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 130.368000] Mobile IPv6 [ 177.766000] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 177.927000] usb 2-2: configuration #1 chosen from 1 choice [ 177.929000] hub 2-2:1.0: USB hub found [ 177.932000] hub 2-2:1.0: 4 ports detected [ 178.222000] usb 2-2.1: new full speed USB device using uhci_hcd and address 3 [ 178.321000] usb 2-2.1: not running at top speed; connect to a high speed hub [ 178.349000] usb 2-2.1: configuration #1 chosen from 1 choice [ 178.855000] usb 3-1: USB disconnect, address 2 [ 178.907000] ieee80211_crypt: registered algorithm 'NULL' [ 178.957000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 178.957000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 179.235000] zd1211rw 2-2.1:1.0: firmware version 4725 [ 179.298000] zd1211rw 2-2.1:1.0: zd1211b chip 0ace:1215 v4810 full 00-02-72 AL2230_RF pa0 g--N [ 179.308000] zd1211rw 2-2.1:1.0: eth1 [ 179.308000] usbcore: registered new interface driver zd1211rw [ 179.435000] usbcore: registered new interface driver zd1211rw_d80211 [ 179.545000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 184.248000] usb 2-2.3: new low speed USB device using uhci_hcd and address 4 [ 184.377000] usb 2-2.3: configuration #1 chosen from 1 choice [ 184.408000] input: Logitech USB Receiver as /class/input/input8 [ 184.408000] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2.3 [ 184.440000] input: Logitech USB Receiver as /class/input/input9 [ 184.440000] input,hiddev0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2.3 [ 202.795000] SoftMAC: Open Authentication completed with 00:18:39:c9:54:11 [ 203.351000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 203.418000] ieee80211_crypt: registered algorithm 'CCMP' [ 203.439000] CCMP: replay detected: STA=00:18:39:c9:54:11 previous PN 000000000438 received PN 000000000438 [ 217.571000] eth1: no IPv6 routers present [ 365.935000] usb 2-2.3: USB disconnect, address 4 [ 8585.819000] SoftMAC: Open Authentication completed with 00:18:39:c9:54:11 [ 8643.472000] SoftMAC: Open Authentication completed with 00:18:39:c9:54:11 [ 8764.833000] SoftMAC: Open Authentication completed with 00:18:39:c9:54:11 [10173.287000] usb 2-2.3: new low speed USB device using uhci_hcd and address 5 [10173.411000] usb 2-2.3: configuration #1 chosen from 1 choice [10173.441000] input: Logitech USB Receiver as /class/input/input10 [10173.441000] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2.3 [10173.470000] input: Logitech USB Receiver as /class/input/input11 [10173.470000] input,hiddev0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2.3