Linux version 2.6.15.3 (root@gendcc06) (gcc version 3.3.2 20040119 (Gentoo Linux 3.3.2-r7, propolice-3.3-7)) #1 Tue Feb 14 18:41:00 UTC 2006
Booting GENERIC on Tsunami variation Clipper using machine vector Clipper from SRM
Major Options: LEGACY_START VERBOSE_MCHECK
Command line: console=ttyS0  root=/dev/ram0 init=/linuxrc dokeymap looptype=zisofs loop=/zisofs cdroot
memcluster 0, usage 1, start        0, end      256
memcluster 1, usage 0, start      256, end   130981
memcluster 2, usage 1, start   130981, end   131072
memcluster 3, usage 0, start   131072, end   262142
memcluster 4, usage 1, start   262142, end   262144
freeing pages 256:384
freeing pages 1067:130981
freeing pages 131072:262142
reserving pages 1067:1071
Initial ramdisk at: 0xfffffc007fc66000 (2161967 bytes)
4096K Bcache detected; load hit latency 18 cycles, load miss latency 163 cycles
Built 1 zonelists
Kernel command line: console=ttyS0  root=/dev/ram0 init=/linuxrc dokeymap looptype=zisofs loop=/zisofs cdroot
PID hash table entries: 4096 (order: 12, 131072 bytes)
Using epoch = 2000
Console: colour dummy device 80x25
Dentry cache hash table entries: 524288 (order: 9, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 8, 2097152 bytes)
Memory: 2063416k/2097136k available (3532k kernel code, 30304k reserved, 616k data, 328k init)
Mount-cache hash table entries: 512
checking if image is initramfs... it is
Freeing initrd memory: 2111k freed
NET: Registered protocol family 16
EISA bus registered
PCI quirk: region 7e20-7e3f claimed by ali7101 SMB
pci: enabling save/restore of SRM state
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
srm_env: version 0.0.5 loaded successfully
SGI XFS with large block/inode numbers, no debug enabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
rtc: SRM (post-2000) epoch (2000) detected
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 2.88M
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 6.1.16-k2
Copyright (c) 1999-2005 Intel Corporation.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: 0000:00:04.0, 00:02:56:00:09:81, IRQ 36.
  Board assembly 500087-018, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
eth1: 0001:01:03.0, 00:02:56:00:09:82, IRQ 48.
  Board assembly 500087-018, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
sym0: <1010-66> rev 0x1 at pci 0000:00:03.0 irq 32
sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.1
 0:0:0:0: ABORT operation started.
 0:0:0:0: ABORT operation timed-out.
 0:0:0:0: DEVICE RESET operation started.
 0:0:0:0: DEVICE RESET operation timed-out.
 0:0:0:0: BUS RESET operation started.
sym0: SCSI BUS reset detected.
sym0: SCSI BUS has been reset.
 0:0:0:0: BUS RESET operation complete.
 0:0:0:0: ABORT operation started.
 0:0:0:0: ABORT operation timed-out.
 0:0:0:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.