GNU nano 1.2.4                        File: wanpipe3.conf

#================================================
# WANPIPE3 Configuration File
#================================================
#
# Date: Fri Jun 16 13:26:55 MST 2006
#
# Note: This file was generated automatically
#       by /usr/sbin/wancfg program.
#
#       If you want to edit this file, it is
#       recommended that you use wancfg program
#       to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe3 = WAN_AFT_TE1, Comment

[interfaces]
w3g1 = wanpipe3, , TDM_VOICE, Comment

[wanpipe3]
CARD_TYPE       = AFT
S514CPU         = A
CommPort        = PRI
AUTO_PCISLOT    = NO
PCISLOT         = 9
PCIBUS          = 0
FE_MEDIA        = T1
FE_LCODE        = B8ZS
FE_FRAME        = ESF
FE_LINE         = 2
TE_CLOCK        = NORMAL
TE_REF_CLOCK    = 0
TE_HIGHIMPEDANCE        = NO
LBO             = 0DB
FE_TXTRISTATE   = NO
MTU             = 1500
UDPPORT         = 9000
TTL             = 255
IGNORE_FRONT_END = NO
TDMV_SPAN       = 3
TDMV_DCHAN      = 0

[w3g1]
ACTIVE_CH       = ALL
TDMV_ECHO_OFF   = YES
TDMV_HWEC       = YES