CFE> flash -noheader 192.168.1.2:openwrt-brcm-2.4-squashfs.trx flash1.trx
CMD: [flash -noheader 192.168.1.2:openwrt-brcm-2.4-squashfs.trx flash1.trx]
Reading 192.168.1.2:openwrt-brcm-2.4-squashfs.trx: Done. 2756608 bytes read
fname=(null)
Programming...done. 2756608 bytes written
**Exception 8: EPC=803165E4, Cause=0000A008 (TLBMissRd)
                RA=8031E374, VAddr=00000000

        0  ($00) = 00000000     AT ($01) = 80340008
        v0 ($02) = 00000066     v1 ($03) = 00000000
        a0 ($04) = 00000000     a1 ($05) = 80339EBC
        a2 ($06) = 00000000     a3 ($07) = 00000066
        t0 ($08) = 00000000     t1 ($09) = 80341940
        t2 ($10) = 00000000     t3 ($11) = 00000005
        t4 ($12) = B8000000     t5 ($13) = 00000040
        t6 ($14) = 00000001     t7 ($15) = BC000000
        s0 ($16) = 00000002     s1 ($17) = 803728A0
        s2 ($18) = 803A7700     s3 ($19) = 8036F368
        s4 ($20) = 00000000     s5 ($21) = 00000000
        s6 ($22) = 00000000     s7 ($23) = 00000003
        t8 ($24) = A0000000     t9 ($25) = A0000000
        k0 ($26) = 2E323931     k1 ($27) = 00322E31
        gp ($28) = 80344900     sp ($29) = 803A7648
        fp ($30) = 00000000     ra ($31) = 8031E374



CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Oct 30 23:22:44 CST 2006 (root@linux)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing PCI. [normal]
PCI: Initializing host
PCI: Enabling CardBus
SB PCI init done

0x3c = 0x00000100
PCI bus 0 slot 0/0: vendor 0x14e4 product 0x0800 (flash memory, rev 0x02)
PCI bus 0 slot 1/0: vendor 0x14e4 product 0x471f (ethernet network)
PCI bus 0 slot 2/0: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x10, rev 0x02)
PCI bus 0 slot 2/1: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x20, rev 0x02)
PCI bus 0 slot 3/0: vendor 0x14e4 product 0x471b (USB serial bus, rev 0x02)
PCI bus 0 slot 4/0: vendor 0x14e4 product 0x0804 (PCI bridge, rev 0x02)
PCI bus 0 slot 5/0: vendor 0x14e4 product 0x0816 (MIPS processor, rev 0x02)
PCI bus 0 slot 6/0: vendor 0x14e4 product 0x471d (IDE mass storage, rev 0x02)
PCI bus 0 slot 7/0: vendor 0x14e4 product 0x4718 (network/computing crypto, rev 0x02)
PCI bus 0 slot 8/0: vendor 0x14e4 product 0x080f (RAM memory, rev 0x02)
PCI bus 0 slot 9/0: vendor 0x14e4 product 0x471e (class 0xfe, subclass 0x00, rev 0x02)
PCI bus 1 slot 0/0: vendor 0x14e4 product 0x4785 (host bridge, rev 0x02)
Initializing Devices.

No DPN
This is a Parallel Flash
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 0004001B  (28)
os      #02   0004001C -> 007F7FFF  (8093668)
nvram   #03   007F8000 -> 007FFFFF  (32768)
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 007F7FFF  (8093696)
nvram   #02   007F8000 -> 007FFFFF  (32768)
PCI bus 0 slot 1/0: _pci_map_mem: attempt to map 64-bit region tag =0x800 @ addr=18010004
PCI bus 0 slot 1/0: _pci_map_mem: addr=0x18010004   pa=0x18010000   pci_mem_space_pci_base=0x40000000   pci_mem_space=0x8000000
  mcfg = 00081082
ge0: BCM5750 Ethernet at 0x18010000
CPU type 0x2901A: 300MHz
Total memory: 32768 KBytes

Total memory used by CFE:  0x80300000 - 0x803A7AB0 (686768)
Initialized Data:          0x8033C900 - 0x8033FCB0 (13232)
BSS Area:                  0x8033FCB0 - 0x80341AB0 (7680)
Local Heap:                0x80341AB0 - 0x803A5AB0 (409600)
Stack Area:                0x803A5AB0 - 0x803A7AB0 (8192)
Text (code) segment:       0x80300000 - 0x8033C900 (248064)
Boot area (physical):      0x003A8000 - 0x003E8000
Relocation Factor:         I:00000000 - D:00000000

Boot version: v4.2
The boot is CFE

mac_init(): Find mac [00:1A:70:DD:5B:07] in location 0
Nothing...

eou_key_init(): Find key pair in location 4
The eou device id is same
The eou public key is same
The eou private key is same
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
bcm5700: no firmware rendevous
eth0: Link speed: 1000BaseT FDX
Device eth0:  hwaddr 00-1A-70-DD-5B-07, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
  Len:     0x2A1000     (2756608)       (0xBC040000)
  Offset0: 0x1C         (28)            (0xBC04001C)
  Offset1: 0x20 (32)    (0xBC040020)
  Offset2: 0x7D400      (513024)        (0xBC0BD400)
  Header CRC:    0x8AFF6982
  Calculate CRC: 0x8AFF6982
Image 1 is OK
Try to load image 1.
CMD: [boot -raw -z -addr=0x80001000 -max=0x3a0000 flash0.os:]
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: . 0 bytes read
Failed.
Could not load flash0.os:: Error
CFE>