* QA Notice: Pre-stripped files found:
 * /var/tmp/portage/sys-libs/pam-0.99.8.1/image/lib/security/pam_filter/upperLOWER
/var/tmp/portage/sys-libs/pam-0.99.8.1/image/sbin/unix_chkpwd
/var/tmp/portage/sys-libs/pam-0.99.8.1/image/sbin/pam_tally
strip: i586-pc-linux-gnu-strip --strip-unneeded -R .comment
   lib/libpamc.so.0.81.0
   lib/libpam_misc.so.0.81.2
   lib/security/pam_faildelay.so
   lib/security/pam_deny.so
   lib/security/pam_debug.so
   lib/security/pam_limits.so
   lib/security/pam_cracklib.so
   lib/security/pam_env.so
   lib/security/pam_echo.so
   lib/security/pam_ftp.so
   lib/security/pam_securetty.so
   lib/security/pam_listfile.so
   lib/security/pam_tally.so
   lib/security/pam_mail.so
   lib/security/pam_issue.so
   lib/security/pam_rhosts_auth.so
   lib/security/pam_time.so
   lib/security/pam_exec.so
   lib/security/pam_rhosts.so
   lib/security/pam_shells.so
   lib/security/pam_namespace.so
   lib/security/pam_umask.so
   lib/security/pam_loginuid.so
   lib/security/pam_motd.so
   lib/security/pam_lastlog.so
   lib/security/pam_localuser.so
   lib/security/pam_keyinit.so
   lib/security/pam_stress.so
   lib/security/pam_rootok.so
   lib/security/pam_unix.so
   lib/security/pam_succeed_if.so
   lib/security/pam_filter.so
   lib/security/pam_access.so
   lib/security/pam_warn.so
   lib/security/pam_xauth.so
   lib/security/pam_permit.so
   lib/security/pam_nologin.so
   lib/security/pam_mkhomedir.so
   lib/security/pam_group.so
   lib/security/pam_wheel.so
   lib/libpam.so.0.81.8
removing executable bit: usr/lib/libpamc.la
removing executable bit: usr/lib/libpam.la
removing executable bit: usr/lib/libpam_misc.la

 * QA Notice: Package has poor programming practices which may compile
 *            fine but exhibit random runtime failures.
 * tst-pam_cracklib1.c:57: warning: implicit declaration of function ‘calloc’
tst-pam_cracklib2.c:61: warning: implicit declaration of function ‘calloc’
tst-pam_unix1.c:60: warning: implicit declaration of function ‘calloc’
tst-pam_unix2.c:64: warning: implicit declaration of function ‘calloc’
tst-pam_unix3.c:65: warning: implicit declaration of function ‘calloc’
tst-pam_access1.c:65: warning: implicit declaration of function ‘calloc’
tst-pam_access2.c:65: warning: implicit declaration of function ‘calloc’
tst-pam_access3.c:65: warning: implicit declaration of function ‘calloc’
tst-pam_access4.c:65: warning: implicit declaration of function ‘calloc’
tst-pam_limits1.c:69: warning: implicit declaration of function ‘calloc’


 * QA Notice: Package has poor programming practices which may compile
 *            fine but exhibit random runtime failures.
 * tst-pam_cracklib1.c:57: warning: incompatible implicit declaration of built-in function ‘calloc’
tst-pam_cracklib2.c:61: warning: incompatible implicit declaration of built-in function ‘calloc’
tst-pam_unix1.c:60: warning: incompatible implicit declaration of built-in function ‘calloc’
tst-pam_unix2.c:64: warning: incompatible implicit declaration of built-in function ‘calloc’
tst-pam_unix3.c:65: warning: incompatible implicit declaration of built-in function ‘calloc’
tst-pam_access1.c:65: warning: incompatible implicit declaration of built-in function ‘calloc’
tst-pam_access2.c:65: warning: incompatible implicit declaration of built-in function ‘calloc’
tst-pam_access3.c:65: warning: incompatible implicit declaration of built-in function ‘calloc’
tst-pam_access4.c:65: warning: incompatible implicit declaration of built-in function ‘calloc’
tst-pam_limits1.c:69: warning: incompatible implicit declaration of built-in function ‘calloc’

>>> Merging sys-libs/pam-0.99.8.1 to /
 *
 * Your current setup is using one or more of the following modules,
 * that are not built or supported anymore:
 * pam_pwdb, pam_radius, pam_timestamp
 * If you are in real need for these modules, please contact the maintainers
 * of PAM through http://bugs.gentoo.org/ providing information about its
 * use cases.
 *
 * ERROR: sys-libs/pam-0.99.8.1 failed.
 * Call stack:
 *   ebuild.sh, line 1670:   Called dyn_preinst
 *   ebuild.sh, line 1107:   Called pkg_preinst
 *   pam-0.99.8.1.ebuild, line 160:   Called die
 *
 * deprecated PAM modules still used
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/sys-libs/pam-0.99.8.1/temp/build.log'.
 *
!!! FAILED preinst: 1

 * Messages for package sys-apps/915resolution-0.5.3-r1:

 *
 * 915resolution alters your video BIOS in a non-permanent way, this means
 * that there is no risk of permanent damage to your video card, but
 * it also means that it must be run at every boot. To set it up,
 * edit /etc/conf.d/915resolution to add your configuration and type the
 * following command to add it the your defautl runlevel:
 *
 *     "rc-update add 915resolution default"
 *

 * Messages for package net-dns/resolvconf-gentoo-1.4:

 * resolvconf requires /etc/resolv.conf to be a symbolic
 * to resolvconf/run/resolv.conf
 * To set this up automatically type
 *    emerge --config =resolvconf-gentoo-1.4

 * Messages for package sys-devel/gettext-0.16.1-r1:

 * Any package that linked against the previous version
 * of gettext will have to be rebuilt.
 * Please 'emerge gentoolkit' and run:
 * revdep-rebuild --library libintl.so.7

 * Messages for package dev-libs/boost-1.34.1:

 * Using the following options to build:
 *   release debug-symbols=none optimization=none --user-config=/var/tmp/portage/dev-libs/boost-1.34.1/work/boost_1_34_1/user-config.jam

 * Messages for package net-misc/dhcp-3.1.0:

 *
 * WARNING: The dhcp init script has been renamed to dhcpd
 * /etc/init.d/dhcp and /etc/conf.d/dhcp need to be removed and
 * and dhcp should be removed from the default runlevel
 *

 * Messages for package sys-fs/lvm2-2.02.27:

 * use flag nocman is deprecated and replaced
 * with cman and gulm use flags.
 *
 * use flags clvm,cman and gulm are masked
 * by default and need to be unmasked to use them
 *
 * Rebuild your genkernel initramfs if you are using lvm
 * lvm volumes are no longer automatically created for
 * baselayout-2 users. If you are using baselayout-2, be sure to
 * run: # rc-update add lvm boot

 * Messages for package sys-apps/iproute2-2.6.22.20070710:

 *
 * iproute2 requires kernel support for Netlink (CONFIG_NETLINK).
 * This is only applies for kernels prior to 2.4.17
 *

 * Messages for package mail-filter/razor-2.84:

 *
 * Run 'razor-admin -create' to create a default config file in your
 * home directory under /home/user/.razor. (Remember to change user to
 * your username from root before running razor-admin)
 *
 * Razor v2 requires reporters to be registered so their reputations can
 * be computed over time and they can participate in the revocation
 * mechanism. Registration is done with razor-admin -register. It has to be
 * manually invoked in either of the following ways:
 *
 * To register user foo with 's1kr3t' as password:
 *
 * razor-admin -register -user=foo -pass=s1kr3t
 *
 * To register with an email address and have the password assigned:
 *
 * razor-admin -register -user=foo@bar.com
 *
 * To have both (random) username and password assgined:
 *
 * razor-admin -register
 *
 * razor-admin -register negotiates a registration with the Nomination Server
 * and writes the identity information in
 * /home/user/.razor/identity-username, or /etc/razor/identity-username
 * when invoked as root.
 *
 * You can edit razor-agent.conf to change the defaults. Config options
 * and their values are defined in the razor-agent.conf(5) manpage.
 *
 * The next step is to integrate razor-check, razor-report and
 * razor-revoke in your mail system. If you are running Razor v1, the
 * change will be transparent, new versions of razor agents will overwrite
 * the old ones. You would still need to plugin razor-revoke in your MUA,
 * since it's a new addition in Razor v2. If you are not running Razor v1,
 * refer to manpages of razor-check(1), razor-report(1), and
 * razor-revoke(1) for integration instructions.
 *

 * Messages for package media-gfx/xli-1.17.0-r2:

 * Unable to establish /usr/share/man/man1/xview.1.gz symlink
 * Unable to establish /usr/share/man/man1/xsetbg.1.gz symlink

 * Messages for package sys-power/acpid-1.0.6:

 * As of version 1.0.6, acpid uses system log facility instead of custom log
 * file. This means acpid messages will be usually located in
 * /var/log/messages (and not in /var/log/acpid) for common setups.

 * Messages for package sys-devel/binutils-2.18:

 * Sorry, but binutils does not support the LINGUAs: en

 * Messages for package media-libs/alsa-lib-1.0.14a-r1:

 *
 * Please try in-kernel ALSA drivers instead of the alsa-drivers ebuild.
 * If alsa-drivers works for you where a recent kernel does not, we want
 * to know about this. Our e-mail address is alsa-bugs@gentoo.org
 * However, if you notice no sound output or instability, please try to
 * upgrade your kernel to a newer version first.
 * Starting from alsa 1.0.11_rc3 the configuration for dmix is changed.
 * Leaving around old asound.conf or ~/.asoundrc might make all apps
 * using ALSA output crash.
 * Note that dmix output is enabled by default on the 'default' device
 * since ALSA 1.0.9.

 * Messages for package sys-libs/pam-0.99.8.1:

 *
 * Your current setup is using one or more of the following modules,
 * that are not built or supported anymore:
 * pam_pwdb, pam_radius, pam_timestamp
 * If you are in real need for these modules, please contact the maintainers
 * of PAM through http://bugs.gentoo.org/ providing information about its
 * use cases.
 *
 * Your current setup is using one or more of the following modules,
 * that are not built or supported anymore:
 * pam_pwdb, pam_radius, pam_timestamp
 * If you are in real need for these modules, please contact the maintainers
 * of PAM through http://bugs.gentoo.org/ providing information about its
 * use cases.
 *
 * ERROR: sys-libs/pam-0.99.8.1 failed.
 * Call stack:
 *   ebuild.sh, line 1670:   Called dyn_preinst
 *   ebuild.sh, line 1107:   Called pkg_preinst
 *   pam-0.99.8.1.ebuild, line 160:   Called die
 *
 * deprecated PAM modules still used
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/sys-libs/pam-0.99.8.1/temp/build.log'.
 *
 * Regenerating GNU info directory index...
 * Processed 277 info files.
 * IMPORTANT: 15 config files in '/etc' need updating.
 * See the CONFIGURATION FILES section of the emerge
 * man page to learn how to update config files.