[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] ACPI: IRQ14 used by override.
[4294667.296000] ACPI: IRQ15 used by override.
[4294667.296000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz boot=casper xforcevesa initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- debian-installer/locale=fr kbd-chooser/method=fr-latin9
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 2009.401 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.555000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294670.556000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294670.574000] Memory: 1027624k/1047424k available (1976k kernel code, 19148k reserved, 606k data, 288k init, 129920k highmem)
[4294670.574000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294670.634000] Calibrating delay using timer specific routine.. 4021.25 BogoMIPS (lpj=2010625)
[4294670.634000] Security Framework v1.0.0 initialized
[4294670.634000] SELinux:  Disabled at boot.
[4294670.634000] Mount-cache hash table entries: 512
[4294670.634000] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
[4294670.634000] CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
[4294670.634000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294670.634000] CPU: L2 Cache: 512K (64 bytes/line)
[4294670.634000] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000003
[4294670.634000] mtrr: v2.0 (20020519)
[4294670.634000] CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02[4294670.634000] Enabling fast FPU save and restore... done.
[4294670.634000] Enabling unmasked SIMD FPU exception support... done.
[4294670.634000] Checking 'hlt' instruction... OK.
[4294670.638000] checking if image is initramfs... it is
[4294671.141000] Freeing initrd memory: 6838k freed
[4294671.148000] ACPI: Looking for DSDT ... not found!
[4294671.154000] ENABLING IO-APIC IRQs
[4294671.154000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[4294671.266000] NET: Registered protocol family 16
[4294671.266000] EISA bus registered
[4294671.266000] ACPI: bus type pci registered
[4294671.268000] PCI: PCI BIOS revision 3.00 entry at 0xfa430, last bus=5
[4294671.268000] PCI: Using MMCONFIG
[4294671.268000] ACPI: Subsystem revision 20051216
[4294671.275000] ACPI: Interpreter enabled
[4294671.275000] ACPI: Using IOAPIC for interrupt routing
[4294671.275000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.275000] PCI: Probing PCI hardware (bus 00)
[4294671.281000] PCI: Transparent bridge - 0000:00:09.0
[4294671.281000] Boot video device is 0000:05:00.0
[4294671.281000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.358000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[4294671.360000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.361000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[4294671.361000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[4294671.361000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.362000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.362000] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
[4294671.362000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.363000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294671.363000] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[4294671.364000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.364000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294671.364000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[4294671.365000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.365000] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[4294671.366000] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294671.366000] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.366000] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[4294671.367000] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[4294671.367000] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[4294671.368000] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[4294671.368000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[4294671.368000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[4294671.369000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[4294671.369000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[4294671.370000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[4294671.370000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[4294671.370000] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[4294671.371000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[4294671.371000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[4294671.372000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[4294671.372000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[4294671.373000] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[4294671.375000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.375000] pnp: PnP ACPI init
[4294671.380000] pnp: PnP ACPI: found 13 devices
[4294671.380000] PnPBIOS: Disabled by ACPI PNP
[4294671.380000] PCI: Using ACPI for IRQ routing
[4294671.380000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294671.447000] pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
[4294671.447000] pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
[4294671.447000] pnp: 00:00: ioport range 0x1400-0x147f has been reserved
[4294671.447000] pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
[4294671.447000] pnp: 00:00: ioport range 0x1800-0x187f has been reserved
[4294671.447000] pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
[4294671.447000] PCI: Bridge: 0000:00:09.0
[4294671.447000]   IO window: a000-afff
[4294671.447000]   MEM window: fde00000-fdefffff
[4294671.447000]   PREFETCH window: fdf00000-fdffffff
[4294671.447000] PCI: Bridge: 0000:00:0b.0
[4294671.447000]   IO window: 9000-9fff
[4294671.447000]   MEM window: fdd00000-fddfffff
[4294671.447000]   PREFETCH window: fdc00000-fdcfffff
[4294671.447000] PCI: Bridge: 0000:00:0c.0
[4294671.447000]   IO window: 8000-8fff
[4294671.447000]   MEM window: fdb00000-fdbfffff
[4294671.447000]   PREFETCH window: fda00000-fdafffff
[4294671.447000] PCI: Bridge: 0000:00:0d.0
[4294671.447000]   IO window: 7000-7fff
[4294671.447000]   MEM window: fd900000-fd9fffff
[4294671.447000]   PREFETCH window: fd800000-fd8fffff
[4294671.447000] PCI: Bridge: 0000:00:0e.0
[4294671.447000]   IO window: 6000-6fff
[4294671.447000]   MEM window: fa000000-fcffffff
[4294671.447000]   PREFETCH window: d0000000-dfffffff
[4294671.447000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[4294671.447000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[4294671.447000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[4294671.447000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[4294671.447000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[4294671.447000] audit: initializing netlink socket (disabled)
[4294671.447000] audit(1150842117.446:1): initialized
[4294671.447000] highmem bounce pool size: 64 pages
[4294671.447000] VFS: Disk quotas dquot_6.5.1
[4294671.447000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294671.447000] Initializing Cryptographic API
[4294671.447000] io scheduler noop registered
[4294671.447000] io scheduler anticipatory registered
[4294671.447000] io scheduler deadline registered
[4294671.447000] io scheduler cfq registered
[4294676.947000] 0000:00:02.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[4294676.947000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[4294676.947000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[4294676.947000] assign_interrupt_mode Found MSI capability
[4294676.947000] Allocate Port Service[pcie00]
[4294676.947000] Allocate Port Service[pcie03]
[4294676.947000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[4294676.947000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[4294676.947000] assign_interrupt_mode Found MSI capability
[4294676.947000] Allocate Port Service[pcie00]
[4294676.947000] Allocate Port Service[pcie03]
[4294676.947000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[4294676.947000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[4294676.947000] assign_interrupt_mode Found MSI capability
[4294676.947000] Allocate Port Service[pcie00]
[4294676.947000] Allocate Port Service[pcie03]
[4294676.947000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[4294676.947000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[4294676.947000] assign_interrupt_mode Found MSI capability
[4294676.947000] Allocate Port Service[pcie00]
[4294676.947000] Allocate Port Service[pcie03]
[4294676.947000] isapnp: Scanning for PnP cards...
[4294677.303000] isapnp: No Plug & Play device found
[4294677.313000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294677.316000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294677.316000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294677.316000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294677.316000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294677.316000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294677.317000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294677.318000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
[4294677.318000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294677.318000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294677.318000] mice: PS/2 mouse device common for all mice
[4294677.318000] EISA: Probing bus 0 at eisa.0
[4294677.318000] Cannot allocate resource for EISA slot 1
[4294677.318000] Cannot allocate resource for EISA slot 6
[4294677.318000] Cannot allocate resource for EISA slot 7
[4294677.318000] Cannot allocate resource for EISA slot 8
[4294677.318000] EISA: Detected 0 cards.
[4294677.318000] NET: Registered protocol family 2
[4294677.328000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294677.328000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[4294677.328000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294677.328000] TCP: Hash tables configured (established 131072 bind 65536)
[4294677.328000] TCP reno registered
[4294677.328000] TCP bic registered
[4294677.328000] NET: Registered protocol family 1
[4294677.328000] NET: Registered protocol family 8
[4294677.328000] NET: Registered protocol family 20
[4294677.328000] Using IPI Shortcut mode
[4294677.328000] ACPI wakeup devices:
[4294677.328000] HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 PS2M PS2K
[4294677.328000] ACPI: (supports S0 S1 S3 S4 S5)
[4294677.328000] Freeing unused kernel memory: 288k freed
[4294677.367000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294677.371000] vga16fb: initializing
[4294677.371000] vga16fb: mapped to 0xc00a0000
[4294677.519000] Console: switching to colour frame buffer device 80x25
[4294677.519000] fb0: VGA16 VGA frame buffer device
[4294678.637000] Capability LSM initialized
[4294678.667000] ACPI: Fan [FAN] (on)
[4294678.671000] ACPI: Thermal Zone [THRM] (40 C)
[4294679.111000] SCSI subsystem initialized
[4294679.112000] ACPI: bus type scsi registered
[4294679.112000] libata version 1.20 loaded.
[4294679.113000] sata_nv 0000:00:07.0: version 0.8
[4294679.113000] **** SET: Misaligned resource pointer: c19cdc02 Type 07 Len 0
[4294679.113000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[4294679.113000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217
[4294679.113000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[4294679.113000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD400 irq 217
[4294679.113000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD408 irq 217
[4294679.314000] ata1: no device found (phy stat 00000000)
[4294679.314000] scsi0 : sata_nv
[4294679.515000] ata2: no device found (phy stat 00000000)
[4294679.515000] scsi1 : sata_nv
[4294679.515000] **** SET: Misaligned resource pointer: c19cdb02 Type 07 Len 0
[4294679.515000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[4294679.515000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225
[4294679.515000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[4294679.515000] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC000 irq 225
[4294679.515000] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC008 irq 225
[4294679.716000] ata3: no device found (phy stat 00000000)
[4294679.716000] scsi2 : sata_nv
[4294680.071000] ata4: dev 0 cfg 00:427a 49:2f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0000 93:0000
[4294680.071000] nv_sata: Primary device added
[4294680.071000] nv_sata: Primary device removed
[4294680.071000] nv_sata: Secondary device added
[4294680.071000] nv_sata: Secondary device removed
[4294680.071000] ata4: failed to init parameters, disabled
[4294680.071000] ata4: PIO error
[4294680.071000] ata4: failed to reread ID, disabled
[4294680.071000] ata4: dev 0 ATA-0, max MWDMA2, 268435455 sectors: LBA
[4294680.071000] scsi3 : sata_nv
[4294680.072000] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[4294680.072000] NFORCE-CK804: chipset revision 162
[4294680.072000] NFORCE-CK804: not 100% native mode: will probe irqs later
[4294680.072000] NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
[4294680.072000]     ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA
[4294680.072000]     ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
[4294680.072000] Probing IDE interface ide0...
[4294680.744000] hda: PIONEER DVD-RW DVR-110D, ATAPI CD/DVD-ROM drive
[4294681.356000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294681.358000] Probing IDE interface ide1...
[4294681.884000] hda: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
[4294681.884000] Uniform CD-ROM driver Revision: 3.20
[4294682.324000] usbcore: registered new driver usbfs
[4294682.324000] usbcore: registered new driver hub
[4294682.325000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294682.325000] **** SET: Misaligned resource pointer: c19cd302 Type 07 Len 0
[4294682.325000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[4294682.325000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 233
[4294682.325000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[4294682.325000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[4294682.325000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[4294682.325000] ohci_hcd 0000:00:02.0: irq 233, io mem 0xfe02f000
[4294682.343000] ieee1394: Initialized config rom entry `ip1394'
[4294682.378000] hub 1-0:1.0: USB hub found
[4294682.378000] hub 1-0:1.0: 10 ports detected
[4294682.380000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48.
[4294682.479000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[4294682.479000] **** SET: Misaligned resource pointer: dfdf2cc2 Type 07 Len 0
[4294682.479000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[4294682.479000] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 50
[4294682.479000] PCI: Via IRQ fixup for 0000:01:09.0, from 10 to 2
[4294682.482000] **** SET: Misaligned resource pointer: dfdf2cc2 Type 07 Len 0
[4294682.482000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[4294682.482000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 58
[4294682.482000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[4294682.482000] ehci_hcd 0000:00:02.1: EHCI Host Controller
[4294682.482000] ehci_hcd 0000:00:02.1: debug port 1
[4294682.482000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[4294682.482000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[4294682.482000] ehci_hcd 0000:00:02.1: irq 58, io mem 0xfeb00000
[4294682.482000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294682.482000] hub 2-0:1.0: USB hub found
[4294682.482000] hub 2-0:1.0: 10 ports detected
[4294682.533000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50]  MMIO=[fdeff000-fdeff7ff]  Max Packet=[2048]
[4294682.583000] **** SET: Misaligned resource pointer: dfdf29c2 Type 07 Len 0
[4294682.584000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[4294682.584000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217
[4294682.584000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[4294683.096000] eth0: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:0a.0
[4294683.101000] Probing IDE interface ide1...
[4294683.796000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000129200003ecd6][4294684.522000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294684.554000] ISO 9660 Extensions: RRIP_1991A
[4294684.608000] loop: loaded (max 8 devices)
[4294684.618000] Registering unionfs 1.1.2
[4294684.691000] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
[4294720.444000] **** SET: Misaligned resource pointer: dfa5aa02 Type 07 Len 0
[4294720.445000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[4294720.445000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66
[4294720.445000] skge 1.3 addr 0xfdef8000 irq 66 chip Yukon-Lite rev 9
[4294720.445000] skge eth1: addr 00:01:29:d3:30:dc
[4294742.800000] eth0: no link during initialization.
[4294742.817000] skge eth1: enabling interface
[4294743.626000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294744.314000] irda_init()
[4294744.314000] NET: Registered protocol family 23
[4294744.504000] skge eth1: Link is up at 100 Mbps, full duplex, flow control tx and rx
[4294744.535000] NET: Registered protocol family 17
[4294744.639000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294744.825000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[4294744.825000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[4294745.215000] Real Time Clock Driver v1.12
[4294745.313000] Floppy drive(s): fd0 is 1.44M
[4294745.328000] FDC 0 is a post-1991 82077
[4294745.516000] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[4294745.516000]  printing eip:
[4294745.516000] c013112f
[4294745.516000] *pde = 00000000
[4294745.516000] Oops: 0002 [#1]
[4294745.516000] PREEMPT
[4294745.516000] Modules linked in: sir_dev floppy rtc snd_timer serio_raw i2c_nforce2 shpchp af_packet snd irda crc_ccitt soundcore snd_page_alloc i2c_core pci_hotplug evdev skge squashfs unionfs loop nls_cp437 isofs ide_generic forcedeth ehci_hcd ohci1394 ieee1394 ohci_hcd usbcore ide_cd cdrom generic amd74xx sata_nv libata scsi_mod thermal processor fan capability commoncap vga16fb vgastate fbcon tileblit font bitblit softcursor
[4294745.516000] CPU:    0
[4294745.516000] EIP:    0060:[<c013112f>]    Not tainted VLI
[4294745.516000] EFLAGS: 00010002   (2.6.15-23-386)
[4294745.516000] EIP is at finish_wait+0x2f/0x70
[4294745.516000] eax: f2fc4000   ebx: 00000286   ecx: 00000000   edx: 00000000
[4294745.516000] esi: f2fc5fd8   edi: f2fc5fcc   ebp: 00000000   esp: f2fc5fbc
[4294745.516000] ds: 007b   es: 007b   ss: 0068
[4294745.516000] Process kIrDAd (pid: 4532, threadinfo=f2fc4000 task=f2e2ea70)
[4294745.516000] Stack: f2fc4000 00000000 00000000 f8a3b840 00000000 f2e2ea70 c0118940 00000000
[4294745.516000]        00000000 f8a3b790 00000000 c0101385 f2861f98 00000000 00000000 00000000
[4294745.516000]        00000000
[4294745.516000] Call Trace:
[4294745.516000]  [<f8a3b840>] irda_thread+0xb0/0xf0 [sir_dev]
[4294745.516000]  [<c0118940>] default_wake_function+0x0/0x20
[4294745.516000]  [<f8a3b790>] irda_thread+0x0/0xf0 [sir_dev]
[4294745.516000]  [<c0101385>] kernel_thread_helper+0x5/0x10
[4294745.516000] Code: d7 b8 00 e0 ff ff 21 e0 8b 00 c7 00 00 00 00 00 8d 72 0c 3b 72 0c 74 34 9c 5b fa b8 00 e0 ff ff 21 e0 ff 40 14 8b 4f 0c 8b 56 04 <89> 51 04 89 0a 89 77 0c 89 76 04 53 9d ff 48 14 8b 40 08 a8 08
[4294745.516000]  <6>note: kIrDAd[4532] exited with preempt_count 1
[4294745.863000] input: PC Speaker as /class/input/input1
[4294746.214000] input: ImExPS/2 Logitech MX Mouse as /class/input/input2
[4294746.304000] **** SET: Misaligned resource pointer: f25ee602 Type 07 Len 0
[4294746.304000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[4294746.304000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 225
[4294746.304000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[4294746.499000] Linux video capture interface: v1.00
[4294746.616000] intel8x0_measure_ac97_clock: measured 4291454712 usecs
[4294746.616000] intel8x0: measured clock 0 rejected
[4294746.616000] intel8x0: clocking to 48000
[4294746.792000] bttv: driver version 0.9.16 loaded
[4294746.792000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[4294746.792000] bttv: Bt8xx card found (0).
[4294746.792000] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66
[4294746.792000] bttv0: Bt878 (rev 17) at 0000:01:06.0, irq: 66, latency: 32, mmio: 0xfdfff000
[4294746.792000] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[4294746.792000] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[4294746.792000] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
[4294746.795000] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[4294746.887000] tveeprom 2-0050: The eeprom says no radio is present, but the tuner type
[4294746.887000] tveeprom 2-0050: indicates otherwise. I will assume that radio is present.
[4294746.887000] tveeprom 2-0050: Hauppauge model 44809, rev E1A5, serial# 8233285
[4294746.887000] tveeprom 2-0050: tuner model is TCL MPE05-2 (idx 105, type 38)
[4294746.887000] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom 0x74)
[4294746.887000] tveeprom 2-0050: audio processor is None (idx 0)
[4294746.887000] tveeprom 2-0050: decoder processor is BT878 (idx 14)
[4294746.887000] tveeprom 2-0050: has radio, has no IR remote
[4294746.887000] bttv0: using tuner=38
[4294746.887000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[4294746.889000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[4294746.891000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[4294746.921000] bttv0: i2c: checking for TDA9887 @ 0x86... found
[4294746.951000] tda9887 2-0043: chip found @ 0x86 (bt878 #0 [sw])
[4294746.973000] tuner 2-0061: chip found @ 0xc2 (bt878 #0 [sw])
[4294746.973000] tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
[4294747.005000] bttv0: registered device video0
[4294747.006000] bttv0: registered device vbi0
[4294747.007000] bttv0: registered device radio0
[4294747.007000] bttv0: PLL: 28636363 => 35468950 .. ok
[4294747.113000] ACPI: PCI Interrupt 0000:01:06.1[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66
[4294747.200000] bt878: AUDIO driver version 0.0.0 loaded
[4294747.202000] ts: Compaq touchscreen protocol output
[4294747.337000] Linux agpgart interface v0.101 (c) Dave Jones
[4294748.885000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294748.885000] md: bitmap version 4.39
[4294749.227000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294750.287000] NET: Registered protocol family 10
[4294750.287000] lo: Disabled Privacy Extensions
[4294750.287000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4294750.287000] IPv6 over IPv4 tunneling driver
[4294757.164000] ACPI: Power Button (FF) [PWRF]
[4294757.164000] ACPI: Power Button (CM) [PWRB]
[4294757.241000] ibm_acpi: ec object not found
[4294757.259000] pcc_acpi: loading...
[4294758.275000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[4294758.280000] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[4294760.364000] eth1: no IPv6 routers present
[4294770.517000] lp: driver loaded but no devices found
[4294770.682000] ppdev: user-space parallel port driver
[4294771.548000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294771.548000] apm: overridden by ACPI.
[4294779.927000] Bluetooth: Core ver 2.8
[4294779.927000] NET: Registered protocol family 31
[4294779.927000] Bluetooth: HCI device and connection manager initialized
[4294779.927000] Bluetooth: HCI socket layer initialized
[4294780.090000] Bluetooth: L2CAP ver 2.8
[4294780.090000] Bluetooth: L2CAP socket layer initialized
[4294780.329000] Bluetooth: RFCOMM socket layer initialized
[4294780.329000] Bluetooth: RFCOMM TTY layer initialized
[4294780.329000] Bluetooth: RFCOMM ver 1.7
[4295579.565000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[4295579.956000] JFS: nTxBlock = 8086, nTxLock = 64688
[4295580.224000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[4295580.224000] SGI XFS Quota Management subsystem
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] ACPI: IRQ14 used by override.
[4294667.296000] ACPI: IRQ15 used by override.
[4294667.296000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz boot=casper xforcevesa initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- debian-installer/locale=fr kbd-chooser/method=fr-latin9
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 2009.401 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.555000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294670.556000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294670.574000] Memory: 1027624k/1047424k available (1976k kernel code, 19148k reserved, 606k data, 288k init, 129920k highmem)
[4294670.574000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294670.634000] Calibrating delay using timer specific routine.. 4021.25 BogoMIPS (lpj=2010625)
[4294670.634000] Security Framework v1.0.0 initialized
[4294670.634000] SELinux:  Disabled at boot.
[4294670.634000] Mount-cache hash table entries: 512
[4294670.634000] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
[4294670.634000] CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
[4294670.634000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294670.634000] CPU: L2 Cache: 512K (64 bytes/line)
[4294670.634000] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000003
[4294670.634000] mtrr: v2.0 (20020519)
[4294670.634000] CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02[4294670.634000] Enabling fast FPU save and restore... done.
[4294670.634000] Enabling unmasked SIMD FPU exception support... done.
[4294670.634000] Checking 'hlt' instruction... OK.
[4294670.638000] checking if image is initramfs... it is
[4294671.141000] Freeing initrd memory: 6838k freed
[4294671.148000] ACPI: Looking for DSDT ... not found!
[4294671.154000] ENABLING IO-APIC IRQs
[4294671.154000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[4294671.266000] NET: Registered protocol family 16
[4294671.266000] EISA bus registered
[4294671.266000] ACPI: bus type pci registered
[4294671.268000] PCI: PCI BIOS revision 3.00 entry at 0xfa430, last bus=5
[4294671.268000] PCI: Using MMCONFIG
[4294671.268000] ACPI: Subsystem revision 20051216
[4294671.275000] ACPI: Interpreter enabled
[4294671.275000] ACPI: Using IOAPIC for interrupt routing
[4294671.275000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.275000] PCI: Probing PCI hardware (bus 00)
[4294671.281000] PCI: Transparent bridge - 0000:00:09.0
[4294671.281000] Boot video device is 0000:05:00.0
[4294671.281000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.358000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[4294671.360000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.361000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[4294671.361000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[4294671.361000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.362000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.362000] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
[4294671.362000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.363000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294671.363000] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[4294671.364000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.364000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294671.364000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[4294671.365000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.365000] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[4294671.366000] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294671.366000] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.366000] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[4294671.367000] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[4294671.367000] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[4294671.368000] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[4294671.368000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[4294671.368000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[4294671.369000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[4294671.369000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[4294671.370000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[4294671.370000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[4294671.370000] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[4294671.371000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[4294671.371000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[4294671.372000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[4294671.372000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[4294671.373000] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[4294671.375000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.375000] pnp: PnP ACPI init
[4294671.380000] pnp: PnP ACPI: found 13 devices
[4294671.380000] PnPBIOS: Disabled by ACPI PNP
[4294671.380000] PCI: Using ACPI for IRQ routing
[4294671.380000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294671.447000] pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
[4294671.447000] pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
[4294671.447000] pnp: 00:00: ioport range 0x1400-0x147f has been reserved
[4294671.447000] pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
[4294671.447000] pnp: 00:00: ioport range 0x1800-0x187f has been reserved
[4294671.447000] pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
[4294671.447000] PCI: Bridge: 0000:00:09.0
[4294671.447000]   IO window: a000-afff
[4294671.447000]   MEM window: fde00000-fdefffff
[4294671.447000]   PREFETCH window: fdf00000-fdffffff
[4294671.447000] PCI: Bridge: 0000:00:0b.0
[4294671.447000]   IO window: 9000-9fff
[4294671.447000]   MEM window: fdd00000-fddfffff
[4294671.447000]   PREFETCH window: fdc00000-fdcfffff
[4294671.447000] PCI: Bridge: 0000:00:0c.0
[4294671.447000]   IO window: 8000-8fff
[4294671.447000]   MEM window: fdb00000-fdbfffff
[4294671.447000]   PREFETCH window: fda00000-fdafffff
[4294671.447000] PCI: Bridge: 0000:00:0d.0
[4294671.447000]   IO window: 7000-7fff
[4294671.447000]   MEM window: fd900000-fd9fffff
[4294671.447000]   PREFETCH window: fd800000-fd8fffff
[4294671.447000] PCI: Bridge: 0000:00:0e.0
[4294671.447000]   IO window: 6000-6fff
[4294671.447000]   MEM window: fa000000-fcffffff
[4294671.447000]   PREFETCH window: d0000000-dfffffff
[4294671.447000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[4294671.447000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[4294671.447000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[4294671.447000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[4294671.447000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[4294671.447000] audit: initializing netlink socket (disabled)
[4294671.447000] audit(1150842117.446:1): initialized
[4294671.447000] highmem bounce pool size: 64 pages
[4294671.447000] VFS: Disk quotas dquot_6.5.1
[4294671.447000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294671.447000] Initializing Cryptographic API
[4294671.447000] io scheduler noop registered
[4294671.447000] io scheduler anticipatory registered
[4294671.447000] io scheduler deadline registered
[4294671.447000] io scheduler cfq registered
[4294676.947000] 0000:00:02.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[4294676.947000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[4294676.947000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[4294676.947000] assign_interrupt_mode Found MSI capability
[4294676.947000] Allocate Port Service[pcie00]
[4294676.947000] Allocate Port Service[pcie03]
[4294676.947000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[4294676.947000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[4294676.947000] assign_interrupt_mode Found MSI capability
[4294676.947000] Allocate Port Service[pcie00]
[4294676.947000] Allocate Port Service[pcie03]
[4294676.947000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[4294676.947000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[4294676.947000] assign_interrupt_mode Found MSI capability
[4294676.947000] Allocate Port Service[pcie00]
[4294676.947000] Allocate Port Service[pcie03]
[4294676.947000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[4294676.947000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[4294676.947000] assign_interrupt_mode Found MSI capability
[4294676.947000] Allocate Port Service[pcie00]
[4294676.947000] Allocate Port Service[pcie03]
[4294676.947000] isapnp: Scanning for PnP cards...
[4294677.303000] isapnp: No Plug & Play device found
[4294677.313000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294677.316000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294677.316000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294677.316000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294677.316000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294677.316000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294677.317000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294677.318000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
[4294677.318000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294677.318000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294677.318000] mice: PS/2 mouse device common for all mice
[4294677.318000] EISA: Probing bus 0 at eisa.0
[4294677.318000] Cannot allocate resource for EISA slot 1
[4294677.318000] Cannot allocate resource for EISA slot 6
[4294677.318000] Cannot allocate resource for EISA slot 7
[4294677.318000] Cannot allocate resource for EISA slot 8
[4294677.318000] EISA: Detected 0 cards.
[4294677.318000] NET: Registered protocol family 2
[4294677.328000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294677.328000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[4294677.328000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294677.328000] TCP: Hash tables configured (established 131072 bind 65536)
[4294677.328000] TCP reno registered
[4294677.328000] TCP bic registered
[4294677.328000] NET: Registered protocol family 1
[4294677.328000] NET: Registered protocol family 8
[4294677.328000] NET: Registered protocol family 20
[4294677.328000] Using IPI Shortcut mode
[4294677.328000] ACPI wakeup devices:
[4294677.328000] HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 PS2M PS2K
[4294677.328000] ACPI: (supports S0 S1 S3 S4 S5)
[4294677.328000] Freeing unused kernel memory: 288k freed
[4294677.367000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294677.371000] vga16fb: initializing
[4294677.371000] vga16fb: mapped to 0xc00a0000
[4294677.519000] Console: switching to colour frame buffer device 80x25
[4294677.519000] fb0: VGA16 VGA frame buffer device
[4294678.637000] Capability LSM initialized
[4294678.667000] ACPI: Fan [FAN] (on)
[4294678.671000] ACPI: Thermal Zone [THRM] (40 C)
[4294679.111000] SCSI subsystem initialized
[4294679.112000] ACPI: bus type scsi registered
[4294679.112000] libata version 1.20 loaded.
[4294679.113000] sata_nv 0000:00:07.0: version 0.8
[4294679.113000] **** SET: Misaligned resource pointer: c19cdc02 Type 07 Len 0
[4294679.113000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[4294679.113000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217
[4294679.113000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[4294679.113000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD400 irq 217
[4294679.113000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD408 irq 217
[4294679.314000] ata1: no device found (phy stat 00000000)
[4294679.314000] scsi0 : sata_nv
[4294679.515000] ata2: no device found (phy stat 00000000)
[4294679.515000] scsi1 : sata_nv
[4294679.515000] **** SET: Misaligned resource pointer: c19cdb02 Type 07 Len 0
[4294679.515000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[4294679.515000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225
[4294679.515000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[4294679.515000] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC000 irq 225
[4294679.515000] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC008 irq 225
[4294679.716000] ata3: no device found (phy stat 00000000)
[4294679.716000] scsi2 : sata_nv
[4294680.071000] ata4: dev 0 cfg 00:427a 49:2f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0000 93:0000
[4294680.071000] nv_sata: Primary device added
[4294680.071000] nv_sata: Primary device removed
[4294680.071000] nv_sata: Secondary device added
[4294680.071000] nv_sata: Secondary device removed
[4294680.071000] ata4: failed to init parameters, disabled
[4294680.071000] ata4: PIO error
[4294680.071000] ata4: failed to reread ID, disabled
[4294680.071000] ata4: dev 0 ATA-0, max MWDMA2, 268435455 sectors: LBA
[4294680.071000] scsi3 : sata_nv
[4294680.072000] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[4294680.072000] NFORCE-CK804: chipset revision 162
[4294680.072000] NFORCE-CK804: not 100% native mode: will probe irqs later
[4294680.072000] NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
[4294680.072000]     ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA
[4294680.072000]     ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
[4294680.072000] Probing IDE interface ide0...
[4294680.744000] hda: PIONEER DVD-RW DVR-110D, ATAPI CD/DVD-ROM drive
[4294681.356000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294681.358000] Probing IDE interface ide1...
[4294681.884000] hda: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
[4294681.884000] Uniform CD-ROM driver Revision: 3.20
[4294682.324000] usbcore: registered new driver usbfs
[4294682.324000] usbcore: registered new driver hub
[4294682.325000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294682.325000] **** SET: Misaligned resource pointer: c19cd302 Type 07 Len 0
[4294682.325000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[4294682.325000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 233
[4294682.325000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[4294682.325000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[4294682.325000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[4294682.325000] ohci_hcd 0000:00:02.0: irq 233, io mem 0xfe02f000
[4294682.343000] ieee1394: Initialized config rom entry `ip1394'
[4294682.378000] hub 1-0:1.0: USB hub found
[4294682.378000] hub 1-0:1.0: 10 ports detected
[4294682.380000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48.
[4294682.479000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[4294682.479000] **** SET: Misaligned resource pointer: dfdf2cc2 Type 07 Len 0
[4294682.479000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[4294682.479000] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 50
[4294682.479000] PCI: Via IRQ fixup for 0000:01:09.0, from 10 to 2
[4294682.482000] **** SET: Misaligned resource pointer: dfdf2cc2 Type 07 Len 0
[4294682.482000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[4294682.482000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 58
[4294682.482000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[4294682.482000] ehci_hcd 0000:00:02.1: EHCI Host Controller
[4294682.482000] ehci_hcd 0000:00:02.1: debug port 1
[4294682.482000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[4294682.482000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[4294682.482000] ehci_hcd 0000:00:02.1: irq 58, io mem 0xfeb00000
[4294682.482000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294682.482000] hub 2-0:1.0: USB hub found
[4294682.482000] hub 2-0:1.0: 10 ports detected
[4294682.533000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50]  MMIO=[fdeff000-fdeff7ff]  Max Packet=[2048]
[4294682.583000] **** SET: Misaligned resource pointer: dfdf29c2 Type 07 Len 0
[4294682.584000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[4294682.584000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217
[4294682.584000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[4294683.096000] eth0: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:0a.0
[4294683.101000] Probing IDE interface ide1...
[4294683.796000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000129200003ecd6][4294684.522000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294684.554000] ISO 9660 Extensions: RRIP_1991A
[4294684.608000] loop: loaded (max 8 devices)
[4294684.618000] Registering unionfs 1.1.2
[4294684.691000] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
[4294720.444000] **** SET: Misaligned resource pointer: dfa5aa02 Type 07 Len 0
[4294720.445000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[4294720.445000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66
[4294720.445000] skge 1.3 addr 0xfdef8000 irq 66 chip Yukon-Lite rev 9
[4294720.445000] skge eth1: addr 00:01:29:d3:30:dc
[4294742.800000] eth0: no link during initialization.
[4294742.817000] skge eth1: enabling interface
[4294743.626000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294744.314000] irda_init()
[4294744.314000] NET: Registered protocol family 23
[4294744.504000] skge eth1: Link is up at 100 Mbps, full duplex, flow control tx and rx
[4294744.535000] NET: Registered protocol family 17
[4294744.639000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294744.825000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[4294744.825000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[4294745.215000] Real Time Clock Driver v1.12
[4294745.313000] Floppy drive(s): fd0 is 1.44M
[4294745.328000] FDC 0 is a post-1991 82077
[4294745.516000] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[4294745.516000]  printing eip:
[4294745.516000] c013112f
[4294745.516000] *pde = 00000000
[4294745.516000] Oops: 0002 [#1]
[4294745.516000] PREEMPT
[4294745.516000] Modules linked in: sir_dev floppy rtc snd_timer serio_raw i2c_nforce2 shpchp af_packet snd irda crc_ccitt soundcore snd_page_alloc i2c_core pci_hotplug evdev skge squashfs unionfs loop nls_cp437 isofs ide_generic forcedeth ehci_hcd ohci1394 ieee1394 ohci_hcd usbcore ide_cd cdrom generic amd74xx sata_nv libata scsi_mod thermal processor fan capability commoncap vga16fb vgastate fbcon tileblit font bitblit softcursor
[4294745.516000] CPU:    0
[4294745.516000] EIP:    0060:[<c013112f>]    Not tainted VLI
[4294745.516000] EFLAGS: 00010002   (2.6.15-23-386)
[4294745.516000] EIP is at finish_wait+0x2f/0x70
[4294745.516000] eax: f2fc4000   ebx: 00000286   ecx: 00000000   edx: 00000000
[4294745.516000] esi: f2fc5fd8   edi: f2fc5fcc   ebp: 00000000   esp: f2fc5fbc
[4294745.516000] ds: 007b   es: 007b   ss: 0068
[4294745.516000] Process kIrDAd (pid: 4532, threadinfo=f2fc4000 task=f2e2ea70)
[4294745.516000] Stack: f2fc4000 00000000 00000000 f8a3b840 00000000 f2e2ea70 c0118940 00000000
[4294745.516000]        00000000 f8a3b790 00000000 c0101385 f2861f98 00000000 00000000 00000000
[4294745.516000]        00000000
[4294745.516000] Call Trace:
[4294745.516000]  [<f8a3b840>] irda_thread+0xb0/0xf0 [sir_dev]
[4294745.516000]  [<c0118940>] default_wake_function+0x0/0x20
[4294745.516000]  [<f8a3b790>] irda_thread+0x0/0xf0 [sir_dev]
[4294745.516000]  [<c0101385>] kernel_thread_helper+0x5/0x10
[4294745.516000] Code: d7 b8 00 e0 ff ff 21 e0 8b 00 c7 00 00 00 00 00 8d 72 0c 3b 72 0c 74 34 9c 5b fa b8 00 e0 ff ff 21 e0 ff 40 14 8b 4f 0c 8b 56 04 <89> 51 04 89 0a 89 77 0c 89 76 04 53 9d ff 48 14 8b 40 08 a8 08
[4294745.516000]  <6>note: kIrDAd[4532] exited with preempt_count 1
[4294745.863000] input: PC Speaker as /class/input/input1
[4294746.214000] input: ImExPS/2 Logitech MX Mouse as /class/input/input2
[4294746.304000] **** SET: Misaligned resource pointer: f25ee602 Type 07 Len 0
[4294746.304000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[4294746.304000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 225
[4294746.304000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[4294746.499000] Linux video capture interface: v1.00
[4294746.616000] intel8x0_measure_ac97_clock: measured 4291454712 usecs
[4294746.616000] intel8x0: measured clock 0 rejected
[4294746.616000] intel8x0: clocking to 48000
[4294746.792000] bttv: driver version 0.9.16 loaded
[4294746.792000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[4294746.792000] bttv: Bt8xx card found (0).
[4294746.792000] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66
[4294746.792000] bttv0: Bt878 (rev 17) at 0000:01:06.0, irq: 66, latency: 32, mmio: 0xfdfff000
[4294746.792000] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[4294746.792000] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[4294746.792000] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
[4294746.795000] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[4294746.887000] tveeprom 2-0050: The eeprom says no radio is present, but the tuner type
[4294746.887000] tveeprom 2-0050: indicates otherwise. I will assume that radio is present.
[4294746.887000] tveeprom 2-0050: Hauppauge model 44809, rev E1A5, serial# 8233285
[4294746.887000] tveeprom 2-0050: tuner model is TCL MPE05-2 (idx 105, type 38)
[4294746.887000] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom 0x74)
[4294746.887000] tveeprom 2-0050: audio processor is None (idx 0)
[4294746.887000] tveeprom 2-0050: decoder processor is BT878 (idx 14)
[4294746.887000] tveeprom 2-0050: has radio, has no IR remote
[4294746.887000] bttv0: using tuner=38
[4294746.887000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[4294746.889000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[4294746.891000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[4294746.921000] bttv0: i2c: checking for TDA9887 @ 0x86... found
[4294746.951000] tda9887 2-0043: chip found @ 0x86 (bt878 #0 [sw])
[4294746.973000] tuner 2-0061: chip found @ 0xc2 (bt878 #0 [sw])
[4294746.973000] tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
[4294747.005000] bttv0: registered device video0
[4294747.006000] bttv0: registered device vbi0
[4294747.007000] bttv0: registered device radio0
[4294747.007000] bttv0: PLL: 28636363 => 35468950 .. ok
[4294747.113000] ACPI: PCI Interrupt 0000:01:06.1[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66
[4294747.200000] bt878: AUDIO driver version 0.0.0 loaded
[4294747.202000] ts: Compaq touchscreen protocol output
[4294747.337000] Linux agpgart interface v0.101 (c) Dave Jones
[4294748.885000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294748.885000] md: bitmap version 4.39
[4294749.227000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294750.287000] NET: Registered protocol family 10
[4294750.287000] lo: Disabled Privacy Extensions
[4294750.287000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4294750.287000] IPv6 over IPv4 tunneling driver
[4294757.164000] ACPI: Power Button (FF) [PWRF]
[4294757.164000] ACPI: Power Button (CM) [PWRB]
[4294757.241000] ibm_acpi: ec object not found
[4294757.259000] pcc_acpi: loading...
[4294758.275000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[4294758.280000] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[4294760.364000] eth1: no IPv6 routers present
[4294770.517000] lp: driver loaded but no devices found
[4294770.682000] ppdev: user-space parallel port driver
[4294771.548000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294771.548000] apm: overridden by ACPI.
[4294779.927000] Bluetooth: Core ver 2.8
[4294779.927000] NET: Registered protocol family 31
[4294779.927000] Bluetooth: HCI device and connection manager initialized
[4294779.927000] Bluetooth: HCI socket layer initialized
[4294780.090000] Bluetooth: L2CAP ver 2.8
[4294780.090000] Bluetooth: L2CAP socket layer initialized
[4294780.329000] Bluetooth: RFCOMM socket layer initialized
[4294780.329000] Bluetooth: RFCOMM TTY layer initialized
[4294780.329000] Bluetooth: RFCOMM ver 1.7
[4295579.565000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[4295579.956000] JFS: nTxBlock = 8086, nTxLock = 64688
[4295580.224000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[4295580.224000] SGI XFS Quota Management subsystem