Welcome to yaboot version 10.1.12-r716.SuSE booted from '/vdevice/v-scsi@30000003/disk@8000000000000000' Enter "help" to get some basic usage information boot: linuxPerfCtr Please wait, loading kernel... Allocated 00800000 bytes for kernel @ 00400000 Elf64 kernel loaded... OF stdout device is: /vdevice/vty@30000000 Hypertas detected, assuming LPAR ! command line: root=/dev/sda3 memory layout at init: memory_limit : 0000000000000000 (16 MB aligned) alloc_bottom : 0000000000af9000 alloc_top : 0000000008000000 alloc_top_hi : 0000000040000000 rmo_top : 0000000008000000 ram_top : 0000000040000000 Looking for displays instantiating rtas at 0x00000000077d7000 ... done 0000000000000000 : boot cpu 0000000000000000 copying OF device tree ... Building dt strings... Building dt structure... Device tree strings 0x0000000001cfa000 -> 0x0000000001cfb1c6 Device tree struct 0x0000000001cfc000 -> 0x0000000001d05000 Calling quiesce ... returning from prom_init Page orders: linear mapping = 24, others = 12 Partition configured for 8 cpus. Starting Linux PPC64 #1 SMP Mon May 22 14:37:02 UTC 2006 ----------------------------------------------------- ppc64_pft_size = 0x1a ppc64_interrupt_controller = 0x2 platform = 0x101 physicalMemorySize = 0x40000000 ppc64_caches.dcache_line_size = 0x80 ppc64_caches.icache_line_size = 0x80 htab_address = 0x0000000000000000 htab_hash_mask = 0x7ffff ----------------------------------------------------- [boot]0100 MM Init [boot]0100 MM Init Done Linux version 2.6.16.16-1.6-ppc64 (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Mon May 22 14:37:02 UTC 2006 [boot]0012 Setup Arch Node 0 Memory: 0x0-0xf000000 0x13000000-0x15000000 0x17000000-0x1a000000 0x20000000-0x32000000 Node 1 Memory: 0xf000000-0x13000000 0x15000000-0x17000000 0x1a000000-0x20000000 0x32000000-0x40000000 No ramdisk, default root is /dev/sda2 EEH: PCI Enhanced I/O Error Handling Enabled PPC64 nvram contains 7168 bytes Using shared processor idle loop [boot]0015 Setup Done Built 2 zonelists Kernel command line: root=/dev/sda3 [boot]0020 XICS Init xics: no ISA interrupt controller [boot]0021 XICS Done PID hash table entries: 4096 (order: 12, 131072 bytes) time_init: decrementer frequency = 207.050000 MHz time_init: processor frequency = 1656.400000 MHz Page orders: linear mapping = 24, others = 12 Partition configured for 8 cpus. Starting Linux PPC64 #1 SMP Mon May 22 14:37:02 UTC 2006 ----------------------------------------------------- ppc64_pft_size = 0x1a ppc64_interrupt_controller = 0x2 platform = 0x101 physicalMemorySize = 0x40000000 ppc64_caches.dcache_line_size = 0x80 ppc64_caches.icache_line_size = 0x80 htab_address = 0x0000000000000000 htab_hash_mask = 0x7ffff ----------------------------------------------------- [boot]0100 MM Init [boot]0100 MM Init Done Linux version 2.6.16.16-1.6-ppc64 (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Mon May 22 14:37:02 UTC 2006 [boot]0012 Setup Arch Node 0 Memory: 0x0-0xf000000 0x13000000-0x15000000 0x17000000-0x1a000000 0x20000000-0x32000000 Node 1 Memory: 0xf000000-0x13000000 0x15000000-0x17000000 0x1a000000-0x20000000 0x32000000-0x40000000 No ramdisk, default root is /dev/sda2 EEH: PCI Enhanced I/O Error Handling Enabled PPC64 nvram contains 7168 bytes Using shared processor idle loop [boot]0015 Setup Done Built 2 zonelists Kernel command line: root=/dev/sda3 [boot]0020 XICS Init xics: no ISA interrupt controller [boot]0021 XICS Done PID hash table entries: 4096 (order: 12, 131072 bytes) time_init: decrementer frequency = 207.050000 MHz time_init: processor frequency = 1656.400000 MHz Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) freeing bootmem node 0 freeing bootmem node 1 Memory: 1014644k/1048576k available (4336k kernel code, 43256k reserved, 1944k data, 840k bss, 256k init) Security Framework v1.0.0 initialized Mount-cache hash table entries: 256 Processor 1 found. Brought up 2 CPUs Node 0 CPUs: 0-1 Node 1 CPUs: migration_cost=0 NET: Registered protocol family 16 PCI: Probing PCI hardware IOMMU table initialized, virtual merging enabled mapping IO 3fe00300000 -> d000080000000000, size: 100000 PCI: Probing PCI hardware done usbcore: registered new driver usbfs usbcore: registered new driver hub TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) IBM eBus Device Driver RTAS daemon started audit: initializing netlink socket (disabled) audit(1151086467.270:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1 HVSI: registered 0 devices Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled pmac_zilog: 0.6 (Benjamin Herrenschmidt ) isa bounce pool size: 16 pages RAMDISK driver initialized: 16 RAM disks of 123456K size 1024 blocksize input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 oprofile: using ppc64/power5 performance monitoring. NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. VFS: Cannot open root device "sda3" or unknown-block(0,0) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)