Index: target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
===================================================================
--- target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig	(revision 9013)
+++ target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig	(working copy)
@@ -47,11 +47,11 @@
 			mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
 		}
 	}
-	
+
 	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
 		nvram[$1] = $2
 	}
-	
+
 	END {
 		if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
 			c["wan_ifname"] = ""
@@ -61,6 +61,10 @@
 			c["wan_ifname"] = "eth1"
 			c["lan_ifname"] = "eth0"
 		}
+		if (model == "Dell TrueMobile 2300") {
+			c["vlan0ports"] = "0 1 2 3 5*"
+			c["vlan1ports"] = "4 5"
+		}
 		if (nvram["boardtype"] == "bcm94710r4") {
 			# Toshiba WRC-1000
 			c["lan_ifname"] = "eth0"
@@ -74,23 +78,19 @@
 			c["vlan0ports"] = "0 1 2 3 5*"
 			c["vlan1ports"] = "4 5"
 		}
-		if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
-			if (nvram["boardnum"] == "45") {
-				# WL-500gP
-				c["vlan0ports"] = "1 2 3 4 5*"
-				c["vlan1ports"] = "0 5"
-			} else {
-				# Generic BCM94704
-				c["vlan0ports"] = "0 1 2 3 4 5u"
-				c["vlan1ports"] = ""
-				c["lan_ifname"] = "eth0"
-				c["wan_ifname"] = "eth1"
+		if (((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) \
+			&& (model != "ASUS WL-500gP") \
+			&& (model != "ASUS WL-700gE")) {
+			# Generic BCM94704
+			c["vlan0ports"] = "0 1 2 3 4 5u"
+			c["vlan1ports"] = ""
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
 
-				# MAC addresses on 4704 tend to be screwed up. Add a workaround here
-				if (nvram["et0macaddr"] ~ mac_check) {
-					c["lan_macaddr"] = nvram["et0macaddr"]
-					c["wan_macaddr"] = macinc(c["lan_macaddr"])
-				}
+			# MAC addresses on 4704 tend to be screwed up. Add a workaround here
+			if (nvram["et0macaddr"] ~ mac_check) {
+				c["lan_macaddr"] = nvram["et0macaddr"]
+				c["wan_macaddr"] = macinc(c["lan_macaddr"])
 			}
 		}
 
@@ -100,23 +100,12 @@
 			c["lan_ifname"]="eth0"
 			c["wan_ifname"]=""
 		}
-	
-		# ASUS WL-700gE
-		# These are actually same as defaults above. For some reason this script applies
-		# Generic BCM94704 settings instead so we revert to proper settings here.	
-		# Hopefully someone will fix this properly soon.
-		if (model == "ASUS WL-700gE") {
-			c["lan_ifname"]="eth0.0"
-			c["wan_ifname"]="eth0.1"
-			c["vlan0ports"]="1 2 3 4 5*"
-			c["vlan1ports"]="0 5"
-		}
 
 		if (model == "Motorola WR850G V2/V3") {
 			c["vlan0ports"]="0 1 2 3 5*"
 			c["vlan1ports"]="4 5"
 		}
-		
+
 		print "#### VLAN configuration "
 		print "config switch eth0"
 		p("vlan0", "vlan0ports")