Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: Generic   Model: USB SD Reader     Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
  Vendor: Generic   Model: USB CF Reader     Rev: 1.01
  Type:   Direct-Access                      ANSI SCSI revision: 02
  Vendor: Generic   Model: USB SM Reader     Rev: 1.02
  Type:   Direct-Access                      ANSI SCSI revision: 02
  Vendor: Generic   Model: USB MS Reader     Rev: 1.03
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
SCSI device sda: 2007040 512-byte hdwr sectors (1028 MB)
sda: Write Protect is off
 /dev/scsi/host0/bus0/target0/lun0: p1
sdb: Unit Not Ready, sense:
Info fld=0x0, Current 00:00: sns = f0  2
ASC=3a ASCQ= 0
Raw sense data:0xf0 0x01 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x41 0x3a 0x00 0x01 0x00 0x00 0x00
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08
Info fld=0x0, Current sd00:00: sns = f0  2
ASC=3a ASCQ= 0
Raw sense data:0xf0 0x01 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x41 0x3a 0x00 0x01 0x00 0x00 0x00
sdb : block size assumed to be 512 bytes, disk size 1GB.
 /dev/scsi/host0/bus0/target0/lun1: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
 unable to read partition table
sdc: Unit Not Ready, sense:
Info fld=0x0, Current 00:00: sns = f0  2
ASC=3a ASCQ= 0
Raw sense data:0xf0 0x01 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x41 0x3a 0x00 0x01 0x00 0x00 0x00
sdc : READ CAPACITY failed.
sdc : status = 1, message = 00, host = 0, driver = 08
Info fld=0x0, Current sd00:00: sns = f0  2
ASC=3a ASCQ= 0
Raw sense data:0xf0 0x01 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x41 0x3a 0x00 0x01 0x00 0x00 0x00
sdc : block size assumed to be 512 bytes, disk size 1GB.
 /dev/scsi/host0/bus0/target0/lun2: I/O error: dev 08:20, sector 0
 I/O error: dev 08:20, sector 0
 unable to read partition table
sdd: Unit Not Ready, sense:
Info fld=0x0, Current 00:00: sns = f0  2
ASC=3a ASCQ= 0
Raw sense data:0xf0 0x01 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x41 0x3a 0x00 0x01 0x00 0x00 0x00
sdd : READ CAPACITY failed.
sdd : status = 1, message = 00, host = 0, driver = 08
Info fld=0x0, Current sd00:00: sns = f0  2
ASC=3a ASCQ= 0
Raw sense data:0xf0 0x01 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0xaa 0x55 0x41 0x3a 0x00 0x01 0x00 0x00 0x00
sdd : block size assumed to be 512 bytes, disk size 1GB.
 /dev/scsi/host0/bus0/target0/lun3: I/O error: dev 08:30, sector 0
 I/O error: dev 08:30, sector 0
 unable to read partition table
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 8
USB Mass Storage support registered.