SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 079 065 006 Pre-fail Always - 213756131 3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 212 5 Reallocated_Sector_Ct 0x0033 088 088 036 Pre-fail Always - 485 7 Seek_Error_Rate 0x000f 076 060 030 Pre-fail Always - 43413153 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2040 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 211 187 Unknown_Attribute 0x0032 090 090 000 Old_age Always - 10 189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0 190 Temperature_Celsius 0x0022 062 053 045 Old_age Always - 655622182 194 Temperature_Celsius 0x0022 038 047 000 Old_age Always - 38 (Lifetime Min/Max 0/18) 195 Hardware_ECC_Recovered 0x001a 049 044 000 Old_age Always - 158553012 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 10 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 10 occurred at disk power-on lifetime: 1949 hours (81 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff 28 6a e0 Error: UNC at LBA = 0x006a28ff = 6957311 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff 28 6a e0 00 00:01:26.183 READ DMA EXT 25 00 08 ff 28 66 e0 00 00:01:26.174 READ DMA EXT 25 00 08 ff 28 62 e0 00 00:01:26.166 READ DMA EXT 25 00 08 ff 28 5e e0 00 00:01:26.151 READ DMA EXT 25 00 08 ff 28 5a e0 00 00:01:26.049 READ DMA EXT Error 9 occurred at disk power-on lifetime: 1935 hours (80 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 04 cb 5e e2 Error: UNC at LBA = 0x025ecb04 = 39766788 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 18 f7 ca 5e e2 00 00:04:30.901 READ DMA 27 00 00 00 00 00 e0 00 00:04:30.685 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 00:04:30.632 IDENTIFY DEVICE ef 03 46 00 00 00 a0 02 00:04:30.627 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:04:25.696 READ NATIVE MAX ADDRESS EXT Error 8 occurred at disk power-on lifetime: 1935 hours (80 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 04 cb 5e e2 Error: UNC at LBA = 0x025ecb04 = 39766788 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 18 f7 ca 5e e2 00 00:04:13.681 READ DMA 27 00 00 00 00 00 e0 00 00:04:08.267 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 00:04:08.211 IDENTIFY DEVICE ef 03 46 00 00 00 a0 02 00:04:08.199 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:04:25.696 READ NATIVE MAX ADDRESS EXT Error 7 occurred at disk power-on lifetime: 1935 hours (80 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 0c cb 5e e2 Error: UNC at LBA = 0x025ecb0c = 39766796 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 18 f7 ca 5e e2 00 00:04:13.681 READ DMA 27 00 00 00 00 00 e0 00 00:04:08.267 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 00:04:08.211 IDENTIFY DEVICE ef 03 46 00 00 00 a0 02 00:04:08.199 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:04:07.916 READ NATIVE MAX ADDRESS EXT Error 6 occurred at disk power-on lifetime: 1935 hours (80 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 01 cb 5e e2 Error: UNC at LBA = 0x025ecb01 = 39766785 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 18 f7 ca 5e e2 00 00:03:52.240 READ DMA 27 00 00 00 00 00 e0 00 00:04:08.267 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 00:04:08.211 IDENTIFY DEVICE ef 03 46 00 00 00 a0 02 00:04:08.199 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:04:07.916 READ NATIVE MAX ADDRESS EXT