Linux version 2.6.22 (root@hvyJ) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sun Sep 30 01:13:10 BST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b800 (usable) BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable) BIOS-e820: 000000003f6d0000 - 000000003f6e3000 (ACPI NVS) BIOS-e820: 000000003f6e3000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f78a0 Entering add_active_range(0, 0, 259792) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 259792 early_node_map[1] active PFN ranges 0: 0 -> 259792 On node 0 totalpages: 259792 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 237 pages used for memmap HighMem zone: 30179 pages, LIFO batch:7 DMI present. ACPI: RSDP 000F77F0, 0024 (r2 TOSQCI) ACPI: XSDT 3F6D573F, 007C (r1 TOSQCI TOSQCI00 6040000 LTP 0) ACPI: FACP 3F6DFC2A, 00F4 (r3 TOSQCI TOSQCI00 6040000 ALAN 1) ACPI: DSDT 3F6D6A70, 9146 (r2 TOSQCI N.Jersey 6040000 MSFT 3000001) ACPI: FACS 3F6E2FC0, 0040 ACPI: APIC 3F6DFD1E, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A) ACPI: HPET 3F6DFD86, 0038 (r1 TOSQCI TOSQCI00 6040000 LOHR 5A) ACPI: MCFG 3F6DFDBE, 003C (r1 TOSQCI TOSQCI00 6040000 LOHR 5A) ACPI: APIC 3F6DFDFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT 3F6DFE62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SLIC 3F6DFE8A, 0176 (r1 TOSQCI TOSQCI00 6040000 LTP 0) ACPI: SSDT 3F6D67C3, 02AD (r1 SataRe SataAhci 1000 INTL 20061109) ACPI: SSDT 3F6D5D47, 025F (r1 PmRef Cpu0Tst 3000 INTL 20061109) ACPI: SSDT 3F6D5CA1, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20061109) ACPI: SSDT 3F6D57BB, 04E6 (r1 PmRef CpuPm 3000 INTL 20061109) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Built 1 zonelists. Total pages: 257763 Kernel command line: root=/dev/sda5 ro single mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1795.645 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1020932k/1039168k available (1681k kernel code, 17508k reserved, 642k data, 224k init, 121664k highmem) virtual kernel memory layout: fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc034c000 - 0xc0384000 ( 224 kB) .data : 0xc02a4421 - 0xc0344f44 ( 642 kB) .text : 0xc0100000 - 0xc02a4421 (1681 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Calibrating delay using timer specific routine.. 3594.82 BogoMIPS (lpj=7189647) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3591.01 BogoMIPS (lpj=7182032) CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d Total of 2 processors activated (7185.83 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs migration_cost=19 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: System BIOS is requesting _OSI(Linux) ACPI: Please test with "acpi_osi=!Linux" Please send dmidecode to linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.3 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.3 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.3 NET: Registered protocol family 8 NET: Registered protocol family 20 pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved pnp: 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: f0300000-f03fffff PREFETCH window: 50000000-500fffff PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: f0400000-f04fffff PREFETCH window: 50100000-501fffff PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: f0200000-f02fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: f0500000-f05fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5656k freed Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) audit(1191111486.940:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode Freeing unused kernel memory: 224k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: SSDT 3F6D64C3, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20061109) ACPI: SSDT 3F6D5FA6, 0498 (r1 PmRef Cpu0Cst 3001 INTL 20061109) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: SSDT 3F6D66FB, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20061109) ACPI: SSDT 3F6D643E, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20061109) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) Marking TSC unstable due to: possible TSC halt in C2. Time: hpet clocksource has been installed. ACPI: Thermal Zone [THRM] (59 C) Clocksource tsc unstable (delta = -444570327 ns) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH8M: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 ICH8M: chipset revision 3 ICH8M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized libata version 2.21 loaded. hda: HL-DT-ST DVDRAM GSA-U10N, ATAPI CD/DVD-ROM drive hda: selected mode 0x42 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ACPI: PCI Interrupt 0000:0a:01.0[A] -> <6>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 17, io base 0x00001820 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected GSI 16 (level, low) -> IRQ 17 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f0500000-f05007ff] Max Packet=[2048] IR/IT contexts=[4/4] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0804800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf0804c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:03:00.0 to 64 eth0: RTL8101e at 0xf88e8000, 00:1b:24:50:51:4f, IRQ 16 ahci 0000:00:1f.2: version 2.2 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 usb 7-3: new high speed USB device using ehci_hcd and address 2 usb 7-3: configuration #1 chosen from 1 choice ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b24000026b45f] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 cmd 0xf885e100 ctl 0x00000000 bmdma 0x00000000 irq 219 ata2: SATA max UDMA/133 cmd 0xf885e180 ctl 0x00000000 bmdma 0x00000000 irq 219 ata3: SATA max UDMA/133 cmd 0xf885e200 ctl 0x00000000 bmdma 0x00000000 irq 219 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: TOSHIBA MK1637GSX, DL030M, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1637GS DL03 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk Attempting manual resume swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 965GM Chipset. agpgart: Detected 7676K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 Real Time Clock Driver v1.12ac ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81c0b1, caps: 0xa04711/0xa00000 synaptics: Toshiba Satellite U300 detected, limiting rate to 40pps. input: SynPS/2 Synaptics TouchPad as /class/input/input1 si3054: cannot initialize. EXT MID = 0000 sdhci: SDHCI controller found at 0000:0a:01.1 [1180:0822] (rev 22) ACPI: PCI Interrupt 0000:0a:01.1[B] -> GSI 17 (level, low) -> IRQ 16 mmc0: SDHCI at 0xf0500800 irq 16 DMA Adding 1253028k swap on /dev/sda6. Priority:-1 extents:1 across:1253028k EXT3 FS on sda5, internal journal loop: module loaded device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 254:0: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table r8169: eth1: link up r8169: eth1: link up NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth1: no IPv6 routers present ACPI: Battery Slot [BAT1] (battery present) ACPI: AC Adapter [ACAD] (off-line) input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input3 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 mtrr: no more MTRRs available