voip1*CLI> core set debug off voip1*CLI> core set debug 10 Core debug was 0 and is now 10 Really destroying SIP dialog '7a0b2377-1ab4875e@10.0.10.218' Method: SUBSCRIBE voip1*CLI> pri debug intense no set show unset voip1*CLI> pri debug span 1 Enabled debugging on span 1 Really destroying SIP dialog 'da468164-7bc47e3f@10.0.10.218' Method: SUBSCRIBE < Protocol Discriminator: Q.931 (8) len=36 < Call Ref: len= 2 (reference 1163/0x48B) (Originator) < Message type: SETUP (5) < [04 03 80 90 a2] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < Ext: 1 User information layer 1: u-Law (34) < [18 03 a9 83 81] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 1 ] < [6c 0c 21 83 35 30 33 37 38 31 32 30 31 37] < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) < Presentation: Presentation allowed of network provided number (3) '5037812017' ] < [70 05 c1 33 37 34 37] < Called Number (len= 7) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3747' ] -- Making new call for cr 1163 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 112 (cs0, Called Party Number) q931.c:3296 q931_receive: call 1163 on channel 1 enters state 6 (Call Present) q931.c:2570 q931_call_proceeding: call 1163 on channel 1 enters state 9 (Incoming Call Proceeding) > Protocol Discriminator: Q.931 (8) len=10 > Call Ref: len= 2 (reference 1163/0x48B) (Terminator) > Message type: CALL PROCEEDING (2) > [18 03 a9 83 81] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 > ChanSel: Reserved > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 1 ] q931.c:2598 q931_alerting: call 1163 on channel 1 enters state 7 (Call Received) > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 1163/0x48B) (Terminator) > Message type: ALERTING (1) > [1e 02 81 88] > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) > Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ] Really destroying SIP dialog '69dfb525-7ca2795c@10.0.10.218' Method: SUBSCRIBE q931.c:2699 q931_connect: call 1163 on channel 1 enters state 8 (Connect Request) > Protocol Discriminator: Q.931 (8) len=14 > Call Ref: len= 2 (reference 1163/0x48B) (Terminator) > Message type: CONNECT (7) > [18 03 a9 83 81] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 > ChanSel: Reserved > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 1 ] > [1e 02 81 82] > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) > Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ] < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 1163/0x48B) (Originator) < Message type: CONNECT ACKNOWLEDGE (15) q931.c:3454 q931_receive: call 1163 on channel 1 enters state 10 (Active) NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Active q931.c:2763 q931_disconnect: call 1163 on channel 1 enters state 11 (Disconnect Request) > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 1163/0x48B) (Terminator) > Message type: DISCONNECT (69) > [08 02 81 90] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] Really destroying SIP dialog '58057e2f2df278482aa3c28706102b9f@10.0.10.14' Method: BYE < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 1163/0x48B) (Originator) < Message type: RELEASE (77) q931.c:3536 q931_receive: call 1163 on channel 1 enters state 0 (Null) NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release Request > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 1163/0x48B) (Terminator) > Message type: RELEASE COMPLETE (90) > [08 02 81 90] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null