Device status:
Autochanger "LTO-changer" with devices:
   "LTO" (/dev/nst0)
Device "FileStorage" (/home/backup/) is not open.
Device "LTO-OLD" (/dev/nst0) is mounted with Volume="000013" Pool="*unknown*"
    Drive 0 status unknown.
    Total Bytes Read=0 Blocks Read=0 Bytes/block=0
    Positioned at File=0 Block=0
Device "LTO" (/dev/nst0) is not open.
    Device is being initialized.
    Slot 2 is loaded in drive 0.
====

In Use Volume status:
000013 on device "LTO-OLD" (/dev/nst0)
000022 on device "LTO" (/dev/nst0)
====

*
08-Oct 17:16 -dir: Start Backup JobId 286, Job=segin.csr.seti.org.2007-10-08_17.16.31
08-Oct 17:15 segin-fd: DIR and FD clocks differ by -1 seconds, FD automatically adjusting.
08-Oct 17:16 -sd: 3307 Issuing autochanger "unload slot 2, drive 0" command.
08-Oct 17:16 -sd: 3995 Bad autochanger "unload slot 2, drive 0": ERR=Child exited with code 1
Results=Unloading Data Transfer Element into Storage Element 2...mtx: Request Sense: 70 00 05 00 00 00 00 0A 00 00 00 00 53 00 00 00 00 56 00 00
MOVE MEDIUM from Element Address 82 to 2 Failed

08-Oct 17:16 -sd: 3301 Issuing autochanger "loaded? drive 0" command.
08-Oct 17:16 -sd: 3302 Autochanger "loaded? drive 0", result is Slot 2.