# aplay --list-devices aplay: device_list:204: no soundcards found.. # lspci -vvnn 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Toshiba America Info Systems Unknown device [1179:ff01] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261760 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261760 [ 0.000000] On node 0 totalpages: 261760 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32131 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F75E0 checksum 0 [ 0.000000] ACPI: RSDP 000F75E0, 0014 (r0 TOSCPL) [ 0.000000] ACPI: RSDT 3FE888D5, 0054 (r1 TOSCPL TOSCPL00 6040000 LTP 0) [ 0.000000] ACPI: FACP 3FE90C78, 0074 (r1 TOSCPL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: DSDT 3FE8A640, 6638 (r1 TOSCPL CALISTGA 6040000 INTL 20060608) [ 0.000000] ACPI: FACS 3FE91FC0, 0040 [ 0.000000] ACPI: SLIC 3FE90CEC, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0) [ 0.000000] ACPI: APIC 3FE90E62, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 3FE90ECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 3FE90F02, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: BOOT 3FE90FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: APIC 3FE90F70, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: SSDT 3FE89FED, 064F (r1 SataRe SataPri 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 3FE8995B, 0692 (r1 SataRe SataSec 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 3FE88EB5, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 3FE88E0F, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 3FE88929, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists. Total pages: 259715 [ 0.000000] Kernel command line: root=UUID=678a6be4-24c9-475c-a2e4-a1083512c7a7 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1596.128 MHz processor. [ 26.959552] Console: colour VGA+ 80x25 [ 26.959877] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 26.960207] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 26.988491] Memory: 1026168k/1047040k available (2015k kernel code, 20248k reserved, 916k data, 364k init, 129536k highmem) [ 26.988500] virtual kernel memory layout: [ 26.988501] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 26.988502] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 26.988504] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 26.988505] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 26.988506] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 26.988507] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 26.988509] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 26.988512] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 26.988544] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 26.988694] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 26.988699] hpet0: 3 64-bit timers, 14318180 Hz [ 27.069644] Calibrating delay using timer specific routine.. 3195.72 BogoMIPS (lpj=6391455) [ 27.069664] Security Framework v1.0.0 initialized [ 27.069668] SELinux: Disabled at boot. [ 27.069681] Mount-cache hash table entries: 512 [ 27.069791] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001 [ 27.069799] monitor/mwait feature present. [ 27.069801] using mwait in idle threads. [ 27.069805] CPU: L1 I cache: 32K, L1 D cache: 32K [ 27.069807] CPU: L2 cache: 2048K [ 27.069810] CPU: Physical Processor ID: 0 [ 27.069812] CPU: Processor Core ID: 0 [ 27.069814] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001 [ 27.069822] Compat vDSO mapped to ffffe000. [ 27.069834] Checking 'hlt' instruction... OK. [ 27.085731] SMP alternatives: switching to UP code [ 27.086151] Early unpacking initramfs... done [ 27.444393] ACPI: Core revision 20070126 [ 27.444444] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 27.456734] CPU0: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz stepping 06 [ 27.456751] SMP alternatives: switching to SMP code [ 27.456836] Booting processor 1/1 eip 3000 [ 27.467068] Initializing CPU#1 [ 27.545187] Calibrating delay using timer specific routine.. 3192.04 BogoMIPS (lpj=6384091) [ 27.545194] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001 [ 27.545199] monitor/mwait feature present. [ 27.545202] CPU: L1 I cache: 32K, L1 D cache: 32K [ 27.545204] CPU: L2 cache: 2048K [ 27.545206] CPU: Physical Processor ID: 0 [ 27.545208] CPU: Processor Core ID: 1 [ 27.545210] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001 [ 27.545763] CPU1: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz stepping 06 [ 27.545787] Total of 2 processors activated (6387.77 BogoMIPS). [ 27.545987] ENABLING IO-APIC IRQs [ 27.546194] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 27.693143] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 27.713142] Brought up 2 CPUs [ 27.748972] migration_cost=38 [ 27.749114] Booting paravirtualized kernel on bare hardware [ 27.749203] Time: 2:44:30 Date: 09/19/107 [ 27.749223] NET: Registered protocol family 16 [ 27.749309] EISA bus registered [ 27.749314] ACPI: bus type pci registered [ 27.749434] PCI: BIOS BUG #81[49435000] found [ 27.749505] PCI: Using configuration type 1 [ 27.749507] Setting up standard PCI resources [ 27.754021] ACPI: EC: Look up EC in DSDT [ 27.754757] ACPI: EC: GPE=0x19, ports=0x66, 0x62 [ 27.759453] ACPI: System BIOS is requesting _OSI(Linux) [ 27.759455] ACPI: Please test with "acpi_osi=!Linux" [ 27.759457] Please send dmidecode to linux-acpi@vger.kernel.org [ 27.759770] ACPI: Interpreter enabled [ 27.759772] ACPI: (supports S0 S3 S4 S5) [ 27.759789] ACPI: Using IOAPIC for interrupt routing [ 27.805917] ACPI: EC: GPE=0x19, ports=0x66, 0x62 [ 27.805976] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 27.805985] PCI: Probing PCI hardware (bus 00) [ 27.806748] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 27.806753] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 27.808111] PCI: Transparent bridge - 0000:00:1e.0 [ 27.808269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 27.808569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 27.808708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 27.808841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 27.808978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 27.809122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 27.815684] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 27.815791] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 27.815895] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 27.815999] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 27.816101] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 27.816205] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 27.816308] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 27.816411] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 27.816543] Linux Plug and Play Support v0.97 (c) Adam Belay [ 27.816553] pnp: PnP ACPI init [ 27.816560] ACPI: bus type pnp registered [ 27.841139] pnp: PnP ACPI: found 10 devices [ 27.841142] ACPI: ACPI bus type pnp unregistered [ 27.841145] PnPBIOS: Disabled by ACPI PNP [ 27.841189] PCI: Using ACPI for IRQ routing [ 27.841192] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 27.841312] NET: Registered protocol family 8 [ 27.841314] NET: Registered protocol family 20 [ 27.841363] pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved [ 27.841366] pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved [ 27.841369] pnp: 00:01: ioport range 0xff00-0xff7f has been reserved [ 27.841372] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 27.841376] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 27.841379] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 27.841382] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 27.841390] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 27.844908] Time: tsc clocksource has been installed. [ 27.844922] Switched to high resolution mode on CPU 0 [ 27.845011] Switched to high resolution mode on CPU 1 [ 27.871695] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0 [ 27.871768] PCI: Bridge: 0000:00:01.0 [ 27.871771] IO window: 2000-2fff [ 27.871775] MEM window: dc000000-ddffffff [ 27.871779] PREFETCH window: c0000000-cfffffff [ 27.871783] PCI: Bridge: 0000:00:1c.0 [ 27.871786] IO window: 3000-3fff [ 27.871793] MEM window: d6000000-d7ffffff [ 27.871798] PREFETCH window: d0000000-d1ffffff [ 27.871804] PCI: Bridge: 0000:00:1c.1 [ 27.871808] IO window: 4000-4fff [ 27.871814] MEM window: d8000000-d9ffffff [ 27.871819] PREFETCH window: d2000000-d3ffffff [ 27.871826] PCI: Bridge: 0000:00:1c.2 [ 27.871829] IO window: 5000-5fff [ 27.871836] MEM window: da000000-dbffffff [ 27.871841] PREFETCH window: d4000000-d5ffffff [ 27.871854] PCI: Bus 7, cardbus bridge: 0000:06:04.0 [ 27.871856] IO window: 00006000-000060ff [ 27.871862] IO window: 00006400-000064ff [ 27.871867] PREFETCH window: 50000000-53ffffff [ 27.871873] MEM window: 54000000-57ffffff [ 27.871878] PCI: Bridge: 0000:00:1e.0 [ 27.871881] IO window: 6000-6fff [ 27.871888] MEM window: de000000-de0fffff [ 27.871893] PREFETCH window: 50000000-53ffffff [ 27.871911] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 27.871917] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 27.871942] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 27.871949] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 27.871974] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 27.871980] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 27.872006] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 27.872012] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 27.872027] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 27.872046] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 27.872060] NET: Registered protocol family 2 [ 27.920824] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 27.920881] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 27.921646] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 27.921934] TCP: Hash tables configured (established 131072 bind 65536) [ 27.921937] TCP reno registered [ 27.936962] checking if image is initramfs... it is [ 28.641639] Freeing initrd memory: 7343k freed [ 28.641767] Simple Boot Flag at 0x36 set to 0x1 [ 28.642318] audit: initializing netlink socket (disabled) [ 28.642336] audit(1192761870.228:1): initialized [ 28.642445] highmem bounce pool size: 64 pages [ 28.644566] VFS: Disk quotas dquot_6.5.1 [ 28.644617] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 28.644719] io scheduler noop registered [ 28.644721] io scheduler anticipatory registered [ 28.644723] io scheduler deadline registered [ 28.644737] io scheduler cfq registered (default) [ 28.644847] Boot video device is 0000:01:00.0 [ 28.644938] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 28.644981] assign_interrupt_mode Found MSI capability [ 28.644985] Allocate Port Service[0000:00:01.0:pcie00] [ 28.645077] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 28.645139] assign_interrupt_mode Found MSI capability [ 28.645142] Allocate Port Service[0000:00:1c.0:pcie00] [ 28.645177] Allocate Port Service[0000:00:1c.0:pcie02] [ 28.645284] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 28.645347] assign_interrupt_mode Found MSI capability [ 28.645349] Allocate Port Service[0000:00:1c.1:pcie00] [ 28.645388] Allocate Port Service[0000:00:1c.1:pcie02] [ 28.645495] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 28.645558] assign_interrupt_mode Found MSI capability [ 28.645560] Allocate Port Service[0000:00:1c.2:pcie00] [ 28.645598] Allocate Port Service[0000:00:1c.2:pcie02] [ 28.645784] isapnp: Scanning for PnP cards... [ 28.999981] isapnp: No Plug & Play device found [ 29.023223] Real Time Clock Driver v1.12ac [ 29.023471] hpet_resources: 0xfed00000 is busy [ 29.023504] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 29.024693] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 29.024830] input: Macintosh mouse button emulation as /class/input/input0 [ 29.024920] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 29.025227] i8042.c: Detected active multiplexing controller, rev 1.1. [ 29.025306] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 29.025310] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 29.025313] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 29.025316] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 29.025318] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 29.025512] mice: PS/2 mouse device common for all mice [ 29.025743] EISA: Probing bus 0 at eisa.0 [ 29.025751] Cannot allocate resource for EISA slot 1 [ 29.025755] Cannot allocate resource for EISA slot 2 [ 29.025757] Cannot allocate resource for EISA slot 3 [ 29.025759] Cannot allocate resource for EISA slot 4 [ 29.025762] Cannot allocate resource for EISA slot 5 [ 29.025764] Cannot allocate resource for EISA slot 6 [ 29.025775] EISA: Detected 0 cards. [ 29.025861] TCP cubic registered [ 29.025875] NET: Registered protocol family 1 [ 29.025896] Using IPI No-Shortcut mode [ 29.026054] Magic number: 11:345:713 [ 29.026384] Freeing unused kernel memory: 364k freed [ 29.031268] input: AT Translated Set 2 keyboard as /class/input/input1 [ 30.232928] AppArmor: AppArmor initialized<5>audit(1192761871.728:2): type=1505 info="AppArmor initialized" pid=1239 [ 30.239074] fuse init (API version 7.8) [ 30.243663] Failure registering capabilities with primary security module. [ 30.275718] ACPI: SSDT 3FE8965B, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 30.275952] ACPI: SSDT 3FE89114, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 30.276256] Monitor-Mwait will be used to enter C-1 state [ 30.276260] Monitor-Mwait will be used to enter C-2 state [ 30.276263] Monitor-Mwait will be used to enter C-3 state [ 30.276268] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 30.276530] ACPI: SSDT 3FE89893, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 30.276747] ACPI: SSDT 3FE895D6, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 30.277097] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 3.164000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.168000] Time: hpet clocksource has been installed. [ 3.700000] SCSI subsystem initialized [ 3.704000] libata version 2.21 loaded. [ 3.708000] ata_piix 0000:00:1f.2: version 2.11 [ 3.708000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 3.720000] usbcore: registered new interface driver usbfs [ 3.720000] usbcore: registered new interface driver hub [ 3.720000] usbcore: registered new device driver usb [ 3.720000] USB Universal Host Controller Interface driver v3.0 [ 3.864000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 3.864000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 3.864000] scsi0 : ata_piix [ 3.864000] scsi1 : ata_piix [ 3.864000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14 [ 3.864000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15 [ 4.000000] Clocksource tsc unstable (delta = -177793478 ns) [ 4.028000] ata1.00: ATA-7: TOSHIBA MK6034GSX, AH101M, max UDMA/100 [ 4.028000] ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.036000] ata1.00: configured for UDMA/100 [ 4.356000] ata2.00: ATAPI: DVD/CDRW UJDA770, 1.60, max UDMA/33 [ 4.528000] ata2.00: configured for UDMA/33 [ 4.528000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6034GS AH10 PQ: 0 ANSI: 5 [ 4.528000] scsi 1:0:0:0: CD-ROM MATSHITA DVD/CDRW UJDA770 1.60 PQ: 0 ANSI: 5 [ 4.528000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 4.528000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 4.528000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.528000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 4.528000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800 [ 4.528000] usb usb1: configuration #1 chosen from 1 choice [ 4.528000] hub 1-0:1.0: USB hub found [ 4.528000] hub 1-0:1.0: 2 ports detected [ 4.540000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 4.540000] sd 0:0:0:0: [sda] Write Protect is off [ 4.540000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.540000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.540000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 4.540000] sd 0:0:0:0: [sda] Write Protect is off [ 4.540000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.540000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.540000] sda: sda1 sda2 sda3 [ 4.580000] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.580000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 4.580000] Uniform CD-ROM driver Revision: 3.20 [ 4.580000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.584000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.584000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.632000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 4.632000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 4.632000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.632000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 4.632000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 4.632000] usb usb2: configuration #1 chosen from 1 choice [ 4.632000] hub 2-0:1.0: USB hub found [ 4.632000] hub 2-0:1.0: 2 ports detected [ 4.736000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 4.736000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 4.736000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.736000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 4.736000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 4.736000] usb usb3: configuration #1 chosen from 1 choice [ 4.736000] hub 3-0:1.0: USB hub found [ 4.736000] hub 3-0:1.0: 2 ports detected [ 4.768000] Attempting manual resume [ 4.768000] swsusp: Resume From Partition 8:2 [ 4.768000] PM: Checking swsusp image. [ 4.768000] PM: Resume from disk failed. [ 4.780000] EXT3-fs: INFO: recovery required on readonly filesystem. [ 4.780000] EXT3-fs: write access will be enabled during recovery. [ 4.840000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 4.840000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 4.840000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 4.840000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 4.840000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 4.840000] usb usb4: configuration #1 chosen from 1 choice [ 4.840000] hub 4-0:1.0: USB hub found [ 4.840000] hub 4-0:1.0: 2 ports detected [ 4.944000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 4.944000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.944000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.944000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 4.944000] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.944000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 4.944000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xde304000 [ 4.948000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.948000] usb usb5: configuration #1 chosen from 1 choice [ 4.948000] hub 5-0:1.0: USB hub found [ 4.948000] hub 5-0:1.0: 8 ports detected [ 5.052000] ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 5.100000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[de005000-de0057ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 5.100000] r8169 Gigabit Ethernet driver 2.2LK loaded [ 5.100000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 5.100000] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 5.100000] eth0: RTL8101e at 0xf8882000, 00:16:d4:94:8f:77, XID 34000000 IRQ 18 [ 5.688000] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 5.864000] usb 4-1: configuration #1 chosen from 1 choice [ 9.220000] kjournald starting. Commit interval 5 seconds [ 9.220000] EXT3-fs: sda3: orphan cleanup on readonly fs [ 9.220000] ext3_orphan_cleanup: deleting unreferenced inode 5963992 [ 9.220000] ext3_orphan_cleanup: deleting unreferenced inode 5964006 [ 9.220000] ext3_orphan_cleanup: deleting unreferenced inode 5963968 [ 9.220000] ext3_orphan_cleanup: deleting unreferenced inode 5963985 [ 9.220000] ext3_orphan_cleanup: deleting unreferenced inode 5963975 [ 9.220000] ext3_orphan_cleanup: deleting unreferenced inode 5963977 [ 9.220000] ext3_orphan_cleanup: deleting unreferenced inode 5963989 [ 9.220000] EXT3-fs: sda3: 7 orphan inodes deleted [ 9.220000] EXT3-fs: recovery complete. [ 9.284000] EXT3-fs: mounted filesystem with ordered data mode. [ 16.308000] Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00] [ 16.308000] Yenta: Enabling burst memory read transactions [ 16.308000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 16.308000] Yenta: Routing CardBus interrupts to PCI [ 16.308000] Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x64 [ 16.312000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.344000] iTCO_vendor_support: vendor-support=0 [ 16.348000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 16.348000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 16.348000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 16.360000] intel_rng: FWH not detected [ 16.512000] Linux agpgart interface v0.102 (c) Dave Jones [ 16.536000] sdhci: Secure Digital Host Controller Interface driver [ 16.536000] sdhci: Copyright(c) Pierre Ossman [ 16.560000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 16.560000] Socket status: 30000006 [ 16.560000] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a [ 16.560000] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff [ 16.560000] cs: IO port probe 0x6000-0x6fff: clean. [ 16.560000] pcmcia: parent PCI bridge Memory window: 0xde000000 - 0xde0fffff [ 16.560000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 16.560000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.560000] ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 16.560000] sdhci: SDHCI controller found at 0000:06:04.3 [104c:803c] (rev 0) [ 16.560000] ACPI: PCI Interrupt 0000:06:04.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 16.560000] mmc0: SDHCI at 0xde005800 irq 19 DMA [ 16.792000] ieee80211_crypt: registered algorithm 'NULL' [ 16.808000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 16.808000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 16.856000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 16.856000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 16.860000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 16.860000] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 16.860000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 16.952000] cs: IO port probe 0x100-0x3af: clean. [ 16.956000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 16.956000] cs: IO port probe 0x820-0x8ff: clean. [ 16.956000] cs: IO port probe 0xc00-0xcf7: clean. [ 16.956000] cs: IO port probe 0xa00-0xaff: clean. [ 16.960000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 [ 16.960000] synaptics: Toshiba Satellite A130 detected, limiting rate to 40pps. [ 16.988000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [ 17.108000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 17.108000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 17.872000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 17.872000] HDA Intel: probe of 0000:00:1b.0 failed with error -16 [ 18.092000] lp: driver loaded but no devices found [ 18.172000] Adding 2000084k swap on /dev/sda2. Priority:-1 extents:1 across:2000084k [ 18.440000] EXT3 FS on sda3, internal journal [ 18.744000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 20.468000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 20.476000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 20.552000] ACPI: Battery Slot [BAT1] (battery present) [ 20.568000] No dock devices found. [ 20.656000] input: Power Button (FF) as /class/input/input3 [ 20.656000] ACPI: Power Button (FF) [PWRF] [ 20.656000] input: Lid Switch as /class/input/input4 [ 20.656000] ACPI: Lid Switch [LID0] [ 20.656000] input: Power Button (CM) as /class/input/input5 [ 20.656000] ACPI: Power Button (CM) [PWRB] [ 20.760000] ACPI: AC Adapter [ACAD] (on-line) [ 21.800000] ppdev: user-space parallel port driver [ 21.936000] audit(1192761890.737:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4863 profile="/usr/sbin/cupsd" [ 21.996000] apm: BIOS not found. [ 22.104000] r8169: eth0: link down [ 22.316000] Failure registering capabilities with primary security module. [ 22.540000] Bluetooth: Core ver 2.11 [ 22.540000] NET: Registered protocol family 31 [ 22.540000] Bluetooth: HCI device and connection manager initialized [ 22.540000] Bluetooth: HCI socket layer initialized [ 22.560000] Bluetooth: L2CAP ver 2.8 [ 22.560000] Bluetooth: L2CAP socket layer initialized [ 22.612000] Bluetooth: RFCOMM socket layer initialized [ 22.612000] Bluetooth: RFCOMM TTY layer initialized [ 22.612000] Bluetooth: RFCOMM ver 1.8 [ 123.620000] UDF-fs: No VRS found [ 123.652000] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 123.740000] ISO 9660 Extensions: RRIP_1991A [ 128.652000] NET: Registered protocol family 17 [ 131.804000] ieee80211_crypt: registered algorithm 'TKIP' [ 139.484000] NET: Registered protocol family 10 [ 139.484000] lo: Disabled Privacy Extensions [ 139.484000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 150.352000] eth1: no IPv6 routers present [ 224.056000] UDF-fs: No VRS found [ 224.088000] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 224.140000] ISO 9660 Extensions: RRIP_1991A # cat /proc/interrupts CPU0 CPU1 0: 475674 0 IO-APIC-edge timer 1: 1259 0 IO-APIC-edge i8042 8: 10 0 IO-APIC-edge rtc 9: 3087 0 IO-APIC-fasteoi acpi 12: 299656 0 IO-APIC-edge i8042 14: 13862 0 IO-APIC-edge libata 15: 6257 0 IO-APIC-edge libata 16: 28 0 IO-APIC-fasteoi uhci_hcd:usb4, yenta 17: 87132 0 IO-APIC-fasteoi ohci1394, ipw3945 18: 0 0 IO-APIC-fasteoi uhci_hcd:usb3, tifm_7xx1, eth0 19: 0 0 IO-APIC-fasteoi uhci_hcd:usb2, sdhci:slot0 20: 2 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5 NMI: 0 0 LOC: 81497 281287 ERR: 0 MIS: 0