ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/44
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
No dock devices found.
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/44
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/44
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/44
ata2: EH complete
ata2.00: limiting speed to UDMA/33:PIO4
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
NET: Registered protocol family 17
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
eth0: Media Link Off
ADDRCONF(NETDEV_UP): eth0: link is not ready
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
eth1: no IPv6 routers present
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: (BMDMA stat 0x5)
ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: (BMDMA stat 0x5)
ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: (BMDMA stat 0x5)
ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: (BMDMA stat 0x5)
ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x5a data 128 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 5 changed to on
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
sr0: scsi-1 drive
sr 2:0:0:0: Attached scsi CD-ROM sr0
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0x6
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in
         res 51/60:03:00:00:00/00:00:00:00:00/a0 Emask 0x52 (ATA bus error)
ata2: hard resetting port
[lurch@localhost ~]$