Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Wed Mar  3 21:26:25 PST 1999

 1.LCD Test................................PASS
 2.Controller Test.........................PASS
 5.Bank 0:.................................64M
 6.Bank 1:.................................0M
 7.Bank 2:.................................64M
 8.Bank 3:.................................0M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
BOOTLOADER: trying to boot from partition /dev/hda1
Decompressing  done
Jump_to_Real_Kernel: disk error, trying BFD again
BOOTLOADER DEBUG: flashdelaying...
BOOTLOADER: trying to boot from partition /dev/hdc1
Decompressing  done
Jump_to_Real_Kernel: disk error, trying BFD again
BOOTLOADER DEBUG: flashdelaying...
get_root_dev: nr_boot_failures 0x00000002 exceeds maxtries 0x00000002 for boot_index 0x00000000


 *** halting ***


Cobalt Microserver Diagnostics -  'We serve it, you surf it'
Built Wed Mar  3 21:26:25 PST 1999

 1.LCD Test................................PASS
 2.Controller Test.........................PASS
 5.Bank 0:.................................64M
 6.Bank 1:.................................0M
 7.Bank 2:.................................64M
 8.Bank 3:.................................0M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
Decompressing  done
Decompressing \ done.

[ "CoLo" v1.19 ]
stage2: 87fa0000-88000000
cpu: clock 250.000MHz
pci: unit type <RaQ2>
tulip: #0 device 21143
tulip: #1 device 21143
tulip: {00:10:e0:00:4d:dd}
ide: resetting
boot: running boot menu
1> lcd 'Booting...'
1> mount
ide: reset timeout
ide: {WDC WD400JB-00JJC0}
ide: LBA 78165360
ide: supports PIO mode 4
ide: mode 4 timing
ide: partition 1
ext2: revision 0
1> lcd 'Booting...' /dev/{mounted-volume}
1> -load /boot/default.colo
ext2: {boot/default.colo} --> {./default.colo}
00000083 131t
1> -script
2> lcd "Mounting hda1"
2> mount hda1
ext2: revision 0
2> load /kernel-2.6.20.gz
001459fc 1333756t
2> lcd "Loading Linux"
2> execute root=/dev/hda2 ro console=ttyS0,115200
elf32: 00080000 - 002f401f (802bc000) (ffffffff.80000000)
elf32: 80080000 (80080000) 2478213t + 94107t
Linux version 2.6.20.18-mipsgit-20070902 (root@gentoo-mips-20040627) (gcc version 4.1.1 (Gentoo 4.1.1)) #2 Mon Oct 8 03:44:05 CEST 2007
CPU revision is: 000028a0
FPU revision is: 000028a0
Cobalt board ID: 6
Cobalt: early console registered
Determined physical RAM map:
 memory: 08000000 @ 00000000 (usable)
Built 1 zonelists.  Total pages: 32512
Kernel command line: root=/dev/hda2 ro console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 2-way, linesize 32 bytes.
Primary data cache 32kB, 2-way, linesize 32 bytes.
Synthesized TLB refill handler (21 instructions).
Synthesized TLB load handler fastpath (34 instructions).
Synthesized TLB store handler fastpath (34 instructions).
Synthesized TLB modify handler fastpath (33 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
Linux version 2.6.20.18-mipsgit-20070902 (root@gentoo-mips-20040627) (gcc version 4.1.1 (Gentoo 4.1.1)) #2 Mon Oct 8 03:44:05 CEST 2007
CPU revision is: 000028a0
FPU revision is: 000028a0
Cobalt board ID: 6
Cobalt: early console registered
Determined physical RAM map:
 memory: 08000000 @ 00000000 (usable)
Built 1 zonelists.  Total pages: 32512
Kernel command line: root=/dev/hda2 ro console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 2-way, linesize 32 bytes.
Primary data cache 32kB, 2-way, linesize 32 bytes.
Synthesized TLB refill handler (21 instructions).
Synthesized TLB load handler fastpath (34 instructions).
Synthesized TLB store handler fastpath (34 instructions).
Synthesized TLB modify handler fastpath (33 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 126848k/131072k available (1879k kernel code, 4156k reserved, 404k data, 136k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Galileo: fixed bridge class
Galileo: revision 17
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
fuse init (API version 7.8)
io scheduler noop registered
io scheduler anticipatory registered (default)
Activating ISA DMA hang workarounds.
rtc: SRM (post-2000) epoch (2000) detected
Real Time Clock Driver v1.12ac
Cobalt LCD Driver v2.10
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0xc800000 (irq = 21) is a ST16650V2
Linux Tulip driver version 1.1.14-NAPI (December 15, 2004)
PCI: Enabling device 0000:00:07.0 (0045 -> 0047)
tulip0: Old format EEPROM on 'Cobalt Microserver' board.  Using substitute media control info.
tulip0:  EEPROM default media type Autosense.
tulip0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip0:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth0: Digital DS21142/43 Tulip rev 65 at Port 0x1400, 00:10:E0:00:4D:DD, IRQ 19.
PCI: Enabling device 0000:00:0c.0 (0005 -> 0007)
tulip1: Old format EEPROM on 'Cobalt Microserver' board.  Using substitute media control info.
tulip1:  EEPROM default media type Autosense.
tulip1:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip1:  MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth1: Digital DS21142/43 Tulip rev 65 at Port 0x1480, 00:10:E0:00:4D:D7, IRQ 20.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:09.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586a (rev 27) IDE UDMA33 controller on pci0000:00:09.1
    ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x1828-0x182f, BIOS settings: hdc:pio, hdd:pio

ide0: I/O resource 0xF00003F6-0xF00003F6 not free. 
ide0: ports already in use, skipping probe
ide1: I/O resource 0xF0000376-0xF0000376 not free.
ide1: ports already in use, skipping probe
ide0: I/O resource 0xF00003F6-0xF00003F6 not free.
ide0: ports already in use, skipping probe
ide1: I/O resource 0xF0000376-0xF0000376 not free.
ide1: ports already in use, skipping probe

TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Cannot open root device "hda2" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)