[    0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)

[    0.000000] BIOS-provided physical RAM map:

[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)

[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)

[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)

[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)

[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)

[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)

[    0.000000] 127MB HIGHMEM available.

[    0.000000] 896MB LOWMEM available.

[    0.000000] found SMP MP-table at 000f5030

[    0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used

[    0.000000] Zone PFN ranges:

[    0.000000]   DMA             0 ->     4096

[    0.000000]   Normal       4096 ->   229376

[    0.000000]   HighMem    229376 ->   262128

[    0.000000] early_node_map[1] active PFN ranges

[    0.000000]     0:        0 ->   262128

[    0.000000] On node 0 totalpages: 262128

[    0.000000]   DMA zone: 32 pages used for memmap

[    0.000000]   DMA zone: 0 pages reserved

[    0.000000]   DMA zone: 4064 pages, LIFO batch:0

[    0.000000]   Normal zone: 1760 pages used for memmap

[    0.000000]   Normal zone: 223520 pages, LIFO batch:31

[    0.000000]   HighMem zone: 255 pages used for memmap

[    0.000000]   HighMem zone: 32497 pages, LIFO batch:7

[    0.000000] DMI 2.3 present.

[    0.000000] ACPI: RSDP signature @ 0xC00F69B0 checksum 0

[    0.000000] ACPI: RSDP 000F69B0, 0014 (r0 Nvidia)

[    0.000000] ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)

[    0.000000] ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)

[    0.000000] ACPI: DSDT 3FFF30C0, 48A2 (r1 NVIDIA AWRDACPI     1000 MSFT  100000C)

[    0.000000] ACPI: FACS 3FFF0000, 0040

[    0.000000] ACPI: APIC 3FFF7980, 005A (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)

[    0.000000] Nvidia board detected. Ignoring ACPI timer override.

[    0.000000] If you got timer trouble try acpi_use_timer_override

[    0.000000] ACPI: PM-Timer IO Port: 0x1008

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[    0.000000] Processor #0 15:12 APIC version 16

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])

[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)

[    0.000000] Built 1 zonelists.  Total pages: 260081

[    0.000000] Kernel command line: root=UUID=96f99c28-38c2-42b4-9bc0-759edf703531 ro quiet splash

[    0.000000] mapped APIC to ffffd000 (fee00000)

[    0.000000] mapped IOAPIC to ffffc000 (fec00000)

[    0.000000] Enabling fast FPU save and restore... done.

[    0.000000] Enabling unmasked SIMD FPU exception support... done.

[    0.000000] Initializing CPU#0

[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)

[    0.000000] Detected 2009.792 MHz processor.

[   20.192416] spurious 8259A interrupt: IRQ7.

[   20.195108] Console: colour VGA+ 80x25

[   20.195725] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[   20.196200] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[   20.218692] Memory: 1027624k/1048512k available (2015k kernel code, 20200k reserved, 916k data, 364k init, 131008k highmem)

[   20.218703] virtual kernel memory layout:

[   20.218704]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)

[   20.218705]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)

[   20.218706]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)

[   20.218708]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)

[   20.218709]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)

[   20.218710]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)

[   20.218711]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)

[   20.218714] Checking if this processor honours the WP bit even in supervisor mode... Ok.

[   20.218754] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1

[   20.298698] Calibrating delay using timer specific routine.. 4022.13 BogoMIPS (lpj=8044274)

[   20.298729] Security Framework v1.0.0 initialized

[   20.298739] SELinux:  Disabled at boot.

[   20.298752] Mount-cache hash table entries: 512

[   20.298891] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000

[   20.298899] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

[   20.298902] CPU: L2 Cache: 512K (64 bytes/line)

[   20.298905] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000

[   20.298916] Compat vDSO mapped to ffffe000.

[   20.298930] Checking 'hlt' instruction... OK.

[   20.314838] SMP alternatives: switching to UP code

[   20.315081] Freeing SMP alternatives: 11k freed

[   20.315370] Early unpacking initramfs... done

[   20.615799] ACPI: Core revision 20070126

[   20.615862] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

[   20.618177] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00

[   20.618191] Total of 1 processors activated (4022.13 BogoMIPS).

[   20.618305] ENABLING IO-APIC IRQs

[   20.618468] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1

[   20.762309] Brought up 1 CPUs

[   20.762400] Booting paravirtualized kernel on bare hardware

[   20.762441] Time: 23:57:46  Date: 09/21/107

[   20.762459] NET: Registered protocol family 16

[   20.762529] EISA bus registered

[   20.762537] ACPI: bus type pci registered

[   20.791065] PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=2

[   20.791067] PCI: Using configuration type 1

[   20.791069] Setting up standard PCI resources

[   20.797087] ACPI: EC: Look up EC in DSDT

[   20.801777] ACPI: Interpreter enabled

[   20.801779] ACPI: (supports S0 S1 S4 S5)

[   20.801791] ACPI: Using IOAPIC for interrupt routing

[   20.809674] ACPI: PCI Root Bridge [PCI0] (0000:00)

[   20.809680] PCI: Probing PCI hardware (bus 00)

[   20.810147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[   20.810315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]

[   20.810563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]

[   20.853227] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)

[   20.853364] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)

[   20.853504] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.

[   20.853638] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.

[   20.853773] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)

[   20.853907] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)

[   20.854041] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)

[   20.854175] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.

[   20.854314] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.

[   20.854449] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)

[   20.854583] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.

[   20.854719] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)

[   20.854857] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)

[   20.854993] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.

[   20.855127] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.

[   20.855261] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.

[   20.855401] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.

[   20.855542] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)

[   20.855658] ACPI: PCI Interrupt Link [APC1] (IRQs *16)

[   20.855759] ACPI: PCI Interrupt Link [APC2] (IRQs *17)

[   20.855860] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.

[   20.855961] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.

[   20.856062] ACPI: PCI Interrupt Link [APC5] (IRQs *16)

[   20.856208] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0

[   20.856353] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0

[   20.856498] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.

[   20.856648] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.

[   20.856794] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0

[   20.856939] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.

[   20.857042] ACPI: PCI Interrupt Link [APCS] (IRQs *23)

[   20.857185] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0

[   20.857330] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.

[   20.857476] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.

[   20.857621] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.

[   20.857771] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.

[   20.857922] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0

[   20.858028] ACPI: Power Resource [ISAV] (on)

[   20.858044] Linux Plug and Play Support v0.97 (c) Adam Belay

[   20.858056] pnp: PnP ACPI init

[   20.858063] ACPI: bus type pnp registered

[   20.862017] pnp: PnP ACPI: found 14 devices

[   20.862019] ACPI: ACPI bus type pnp unregistered

[   20.862022] PnPBIOS: Disabled by ACPI PNP

[   20.862066] PCI: Using ACPI for IRQ routing

[   20.862070] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report

[   20.871735] NET: Registered protocol family 8

[   20.871737] NET: Registered protocol family 20

[   20.871788] pnp: 00:00: ioport range 0x1000-0x107f has been reserved

[   20.871791] pnp: 00:00: ioport range 0x1080-0x10ff has been reserved

[   20.871793] pnp: 00:00: ioport range 0x1400-0x147f has been reserved

[   20.871796] pnp: 00:00: ioport range 0x1480-0x14ff has been reserved

[   20.871799] pnp: 00:00: ioport range 0x1800-0x187f has been reserved

[   20.871802] pnp: 00:00: ioport range 0x1880-0x18ff has been reserved

[   20.871806] pnp: 00:01: iomem range 0xf0000-0xf3fff could not be reserved

[   20.871809] pnp: 00:01: iomem range 0xf4000-0xf7fff could not be reserved

[   20.871812] pnp: 00:01: iomem range 0xf8000-0xfbfff could not be reserved

[   20.871815] pnp: 00:01: iomem range 0xfc000-0xfffff could not be reserved

[   20.874175] Time: tsc clocksource has been installed.

[   20.902026] PCI: Bridge: 0000:00:0b.0

[   20.902028]   IO window: disabled.

[   20.902032]   MEM window: f8000000-faffffff

[   20.902035]   PREFETCH window: e0000000-efffffff

[   20.902039] PCI: Bridge: 0000:00:0e.0

[   20.902041]   IO window: a000-afff

[   20.902044]   MEM window: fb000000-fbffffff

[   20.902046]   PREFETCH window: disabled.

[   20.902056] PCI: Setting latency timer of device 0000:00:0e.0 to 64

[   20.902069] NET: Registered protocol family 2

[   20.938170] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[   20.938350] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)

[   20.940017] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[   20.940516] TCP: Hash tables configured (established 131072 bind 65536)

[   20.940519] TCP reno registered

[   20.950233] checking if image is initramfs... it is

[   21.401695] Switched to high resolution mode on CPU 0

[   21.538966] Freeing initrd memory: 7333k freed

[   21.539297] audit: initializing netlink socket (disabled)

[   21.539309] audit(1193011066.056:1): initialized

[   21.539365] highmem bounce pool size: 64 pages

[   21.540761] VFS: Disk quotas dquot_6.5.1

[   21.540801] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[   21.540886] io scheduler noop registered

[   21.540888] io scheduler anticipatory registered

[   21.540889] io scheduler deadline registered

[   21.540901] io scheduler cfq registered (default)

[   21.569466] Boot video device is 0000:01:00.0

[   21.569581] isapnp: Scanning for PnP cards...

[   21.922970] isapnp: No Plug & Play device found

[   21.940760] Real Time Clock Driver v1.12ac

[   21.940853] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

[   21.940932] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[   21.941048] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[   21.941459] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[   21.941629] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[   21.942168] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

[   21.942346] input: Macintosh mouse button emulation as /class/input/input0

[   21.942404] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[   21.945767] serio: i8042 KBD port at 0x60,0x64 irq 1

[   21.945772] serio: i8042 AUX port at 0x60,0x64 irq 12

[   21.945901] mice: PS/2 mouse device common for all mice

[   21.945983] EISA: Probing bus 0 at eisa.0

[   21.945990] Cannot allocate resource for EISA slot 1

[   21.945993] Cannot allocate resource for EISA slot 2

[   21.946006] EISA: Detected 0 cards.

[   21.946092] TCP cubic registered

[   21.946104] NET: Registered protocol family 1

[   21.946129] Using IPI No-Shortcut mode

[   21.946268]   Magic number: 11:486:1010

[   21.946732] Freeing unused kernel memory: 364k freed

[   22.017037] input: AT Translated Set 2 keyboard as /class/input/input1

[   23.153708] AppArmor: AppArmor initialized<5>audit(1193011067.556:2):  type=1505 info="AppArmor initialized" pid=1232

[   23.159901] fuse init (API version 7.8)

[   23.164407] Failure registering capabilities with primary security module.

[   23.727745] usbcore: registered new interface driver usbfs

[   23.727771] usbcore: registered new interface driver hub

[   23.727789] usbcore: registered new device driver usb

[   23.728360] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver

[   23.728655] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22

[   23.728663] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16

[   23.728674] PCI: Setting latency timer of device 0000:00:02.0 to 64

[   23.728677] ohci_hcd 0000:00:02.0: OHCI Host Controller

[   23.728825] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1

[   23.728840] ohci_hcd 0000:00:02.0: irq 16, io mem 0xfc003000

[   23.761135] SCSI subsystem initialized

[   23.765123] libata version 2.21 loaded.

[   23.789613] usb usb1: configuration #1 chosen from 1 choice

[   23.789638] hub 1-0:1.0: USB hub found

[   23.789649] hub 1-0:1.0: 4 ports detected

[   23.891436] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21

[   23.891446] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17

[   23.891459] PCI: Setting latency timer of device 0000:00:02.1 to 64

[   23.891462] ohci_hcd 0000:00:02.1: OHCI Host Controller

[   23.891483] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2

[   23.891498] ohci_hcd 0000:00:02.1: irq 17, io mem 0xfc004000

[   23.949049] usb usb2: configuration #1 chosen from 1 choice

[   23.949078] hub 2-0:1.0: USB hub found

[   23.949088] hub 2-0:1.0: 4 ports detected

[   24.056472] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

[   24.056478] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

[   24.056958] NFORCE3-250: IDE controller at PCI slot 0000:00:08.0

[   24.057043] NFORCE3-250: chipset revision 162

[   24.057045] NFORCE3-250: not 100% native mode: will probe irqs later

[   24.057049] NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.

[   24.057051] NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.

[   24.057055] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller

[   24.057062]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA

[   24.057073]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA

[   24.057080] Probing IDE interface ide0...

[   24.194690] usb 1-4: new low speed USB device using ohci_hcd and address 2

[   24.342609] hda: Maxtor 6L200P0, ATA DISK drive

[   24.411972] usb 1-4: configuration #1 chosen from 1 choice

[   24.426491] usbcore: registered new interface driver hiddev

[   24.441213] input: Silitek USB Keyboard  as /class/input/input2

[   24.441227] input: USB HID v1.00 Keyboard [Silitek USB Keyboard ] on usb-0000:00:02.0-4

[   24.458984] input: Silitek USB Keyboard  as /class/input/input3

[   24.459108] input,hiddev96: USB HID v1.00 Device [Silitek USB Keyboard ] on usb-0000:00:02.0-4

[   24.459118] usbcore: registered new interface driver usbhid

[   24.459121] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver

[   24.622322] hdb: WDC WD1200JB-00DUA3, ATA DISK drive

[   24.683194] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

[   24.720719] Probing IDE interface ide1...

[   25.453443] hdc: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive

[   26.124798] ide1 at 0x170-0x177,0x376 on irq 15

[   26.126553] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20

[   26.126561] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18

[   26.126571] PCI: Setting latency timer of device 0000:00:02.2 to 64

[   26.126574] ehci_hcd 0000:00:02.2: EHCI Host Controller

[   26.126696] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3

[   26.126722] ehci_hcd 0000:00:02.2: debug port 1

[   26.126725] PCI: cache line size of 64 is not supported by device 0000:00:02.2

[   26.126733] ehci_hcd 0000:00:02.2: irq 18, io mem 0xfc005000

[   26.126738] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[   26.126763] usb 1-4: USB disconnect, address 2

[   26.127019] usb usb3: configuration #1 chosen from 1 choice

[   26.127136] hub 3-0:1.0: USB hub found

[   26.127145] hub 3-0:1.0: 8 ports detected

[   26.134549] hda: max request size: 512KiB

[   26.145843] hda: Host Protected Area detected.

[   26.145845]  current capacity is 398294975 sectors (203927 MB)

[   26.145847]  native  capacity is 398297088 sectors (203928 MB)

[   26.168181] hda: Host Protected Area disabled.

[   26.168187] hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133)

[   26.169740] hda: cache flushes supported

[   26.169778]  hda: hda1 hda2 < hda5 >

[   26.204332] hdb: max request size: 512KiB

[   26.228712] sata_nv 0000:00:0a.0: version 3.4

[   26.229050] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22

[   26.229054] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 (level, high) -> IRQ 16

[   26.229093] PCI: Setting latency timer of device 0000:00:0a.0 to 64

[   26.229156] scsi0 : sata_nv

[   26.229188] scsi1 : sata_nv

[   26.229234] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001dc00 irq 16

[   26.229237] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001dc08 irq 16

[   26.266855] hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)

[   26.268374] hdb: cache flushes supported

[   26.268409]  hdb: hdb1

[   26.309488] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)

[   26.309496] Uniform CD-ROM driver Revision: 3.20

[   26.540235] ata1: SATA link down (SStatus 0 SControl 300)

[   26.540245] ata1: EH pending after completion, repeating EH (cnt=4)

[   26.710325] Attempting manual resume

[   26.710328] swsusp: Resume From Partition 3:5

[   26.710330] PM: Checking swsusp image.

[   26.710468] PM: Resume from disk failed.

[   26.724182] EXT3-fs: INFO: recovery required on readonly filesystem.

[   26.724186] EXT3-fs: write access will be enabled during recovery.

[   26.748013] usb 1-4: new low speed USB device using ohci_hcd and address 3

[   26.851910] ata2: SATA link down (SStatus 0 SControl 300)

[   26.851920] ata2: EH pending after completion, repeating EH (cnt=4)

[   26.965439] usb 1-4: configuration #1 chosen from 1 choice

[   26.977554] input: Silitek USB Keyboard  as /class/input/input4

[   26.977568] input: USB HID v1.00 Keyboard [Silitek USB Keyboard ] on usb-0000:00:02.0-4

[   26.995382] input: Silitek USB Keyboard  as /class/input/input5

[   26.995420] input,hiddev96: USB HID v1.00 Device [Silitek USB Keyboard ] on usb-0000:00:02.0-4

[   27.281551] kjournald starting.  Commit interval 5 seconds

[   27.281566] EXT3-fs: recovery complete.

[   27.281883] EXT3-fs: mounted filesystem with ordered data mode.

[   34.206664] Linux agpgart interface v0.102 (c) Dave Jones

[   34.258485] agpgart: Detected AGP bridge 0

[   34.258500] agpgart: Setting up Nforce3 AGP.

[   34.262417] agpgart: AGP aperture is 128M @ 0xf0000000

[   34.284075] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00

[   34.284129] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000

[   34.814714] usbcore: registered new interface driver xpad

[   34.814719] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6

[   35.148523] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[   35.149899] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[   35.803898] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17

[   35.803908] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 19

[   35.809804] input: ImPS/2 Generic Wheel Mouse as /class/input/input6

[   35.822650] parport_pc 00:0a: reported by Plug and Play ACPI

[   35.822690] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]

[   35.824189] input: PC Speaker as /class/input/input7

[   35.883648] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21

[   35.883654] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 17

[   35.883677] PCI: Setting latency timer of device 0000:00:06.0 to 64

[   35.889659] ieee80211_init: failed to initialize WME (err=-17)

[   35.903155] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister

[   35.903190] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put

[   35.903219] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get

[   35.903264] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register

[   35.903632] wmaster0: Selected rate control algorithm 'simple'

[   36.206078] intel8x0_measure_ac97_clock: measured 54659 usecs

[   36.206082] intel8x0: clocking to 46990

[   36.206969] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16

[   36.206978] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 20

[   36.746768] lp0: using parport0 (interrupt-driven).

[   36.792043] Adding 3028212k swap on /dev/hda5.  Priority:-1 extents:1 across:3028212k

[   37.097509] EXT3 FS on hda1, internal journal

[   37.884722] No dock devices found.

[   37.957283] input: Power Button (FF) as /class/input/input8

[   37.961541] ACPI: Power Button (FF) [PWRF]

[   37.994253] input: Power Button (CM) as /class/input/input9

[   37.998440] ACPI: Power Button (CM) [PWRB]

[   38.309360] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)

[   38.309397] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x2

[   38.309400] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x6

[   38.309402] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12

[   39.333757] ppdev: user-space parallel port driver

[   39.512085] audit(1193011084.713:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4861 profile="/usr/sbin/cupsd"

[   39.597436] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)

[   39.597441] apm: overridden by ACPI.

[   39.797265] Failure registering capabilities with primary security module.

[   39.999837] Bluetooth: Core ver 2.11

[   40.000143] NET: Registered protocol family 31

[   40.000146] Bluetooth: HCI device and connection manager initialized

[   40.000149] Bluetooth: HCI socket layer initialized

[   40.017912] Bluetooth: L2CAP ver 2.8

[   40.017916] Bluetooth: L2CAP socket layer initialized

[   40.078172] Bluetooth: RFCOMM socket layer initialized

[   40.078471] Bluetooth: RFCOMM TTY layer initialized

[   40.078474] Bluetooth: RFCOMM ver 1.8

[   20.736000] Marking TSC unstable due to: cpufreq changes.

[   20.740000] Time: acpi_pm clocksource has been installed.

[   22.580000] Clocksource tsc unstable (delta = -249995324 ns)

[   44.720000] NET: Registered protocol family 17

[   45.840000] wlan0: Initial auth_alg=1

[   45.840000] wlan0: authenticate with AP 00:16:0a:09:29:59

[   45.848000] wlan0: RX authentication from 00:16:0a:09:29:59 (alg=1 transaction=2 status=0)

[   45.848000] wlan0: replying to auth challenge

[   45.848000] wlan0: RX authentication from 00:16:0a:09:29:59 (alg=1 transaction=4 status=0)

[   45.848000] wlan0: authenticated

[   45.848000] wlan0: associate with AP 00:16:0a:09:29:59

[   45.852000] wlan0: RX AssocResp from 00:16:0a:09:29:59 (capab=0x451 status=0 aid=4)

[   45.852000] wlan0: associated

[   52.084000] NET: Registered protocol family 10

[   52.088000] lo: Disabled Privacy Extensions

[   52.164000] wlan0: duplicate address detected!