10.0.1.35> online 10.0.1.35> Use of uninitialized value in concatenation (.) or string at send_status.pl line 17. 10.0.1.35> Starting log server.. 10.0.1.35> itions information...OK ^[[A 10.0.1.35> Writing partition table for sdb using sfdisk...OK 10.0.1.35> Cleaning hard drive...OK 10.0.1.35> Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel 10.0.1.35> Building a new DOS disklabel with disk identifier 0x5d79abd3. 10.0.1.35> Changes will remain in memory only, until you decide to write them. 10.0.1.35> After that, of course, the previous content won't be recoverable. 10.0.1.35> 10.0.1.35> 10.0.1.35> The number of cylinders for this disk is set to 1116. 10.0.1.35> There is nothing wrong with that, but this is larger than 1024, 10.0.1.35> and could in certain setups cause problems with: 10.0.1.35> 1) software that runs at boot time (e.g., old versions of LILO) 10.0.1.35> 2) booting and partitioning software from other OSs 10.0.1.35> (e.g., DOS FDISK, OS/2 FDISK) 10.0.1.35> Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) 10.0.1.35> exec lsmod 10.0.1.35> Command (m for help): 0 10.0.1.35> ide_core 99396 3 piix,ide_cd,ide_disk 10.0.1.35> af_packet 17960 0 10.0.1.35> eepro100 28432 0 10.0.1.35> mii 5376 1 eepro100 10.0.1.35> usbkbd 6304 0 10.0.1.35> uhci_hcd 22736 0 10.0.1.35> usbcore 113928 3 usbkbd,uhci_hcd 10.0.1.35> b1 as ext3...OK 10.0.1.35> - Mounting /dev/sda5 as /mnt/disk/ ......OK 10.0.1.35> - Mounting /dev/sdb1 as /mnt/disk/mnt/e ......OK 10.0.1.35> ++++++++++++++++++++++++++ 10.0.1.35> rootfs on / type rootfs (rw) 10.0.1.35> /proc on /proc type proc (rw) 10.0.1.35> none on /sys type sysfs (rw) 10.0.1.35> none on /proc/bus/usb type usbfs (rw) 10.0.1.35> /dev/ram3 on /tmp/stage2 type ext2 (rw) 10.0.1.35> /dev/sda5 on /mnt/disk type ext3 (rw,data=ordered) 10.0.1.35> /dev/sdb1 on /mnt/disk/mnt/e type ext3 (rw,data=ordered) 10.0.1.35> ++++++++++++++++++++++++++ 10.0.1.35> Linux copy is about to start 10.0.1.35> Server IP is 10.0.1.40 10.0.1.35> Buffers names :pipe Total data received = 4815 Megs (11.223 Mbytes/sec); BUF :0M End of data flow 10.0.1.35> Flushing buffers 10.0.1.35> Total data received = 4817 Megs, in 3138893 packets 10.0.1.35> Elapsed time = 506.849 seconds, throughput = 9.506 Mbytes/second 10.0.1.35> Syncing disks...OK 10.0.1.35> Linux copy done. 10.0.1.35> Creating excluded directories 10.0.1.35> - Removing duplicated dhcp cache 10.0.1.35> - Writing modprobe.conf 10.0.1.35> ******************** 10.0.1.35> install scsi_hostadapter /sbin/modprobe aic7xxx; /sbin/modprobe ata_piix; /bin/true 10.0.1.35> alias eth0 eepro100 10.0.1.35> alias eth1 eepro100 10.0.1.35> ******************** 10.0.1.35> - Remove ude network rules 10.0.1.35> removed `/mnt/disk/etc/udev/rules.d/61-net_config.rules' 10.0.1.35> - Running mkinitrd 10.0.1.35> Looking for default grub menu 10.0.1.35> /boot/initrd- 10.0.1.35> usage: mkinitrd [--version] [-v] [-f] [--preload ] [--with=] 10.0.1.35> [--omit-scsi-modules] [--omit-raid-modules] [--omit-ide-modules] 10.0.1.35> [--image-version] [--fstab=] [--nocompress] 10.0.1.35> [--builtin=] [--nopivot] [--noudev] [--allow-missing] 10.0.1.35> [--tmpdir=] [--initrdfs=] [--noresume] [--noresume2] 10.0.1.35> [--dsdt[=]] [--lvm-version=<1|2>] [--force-usb] 10.0.1.35> [--force-evms] [--debug-busybox=] 10.0.1.35> 10.0.1.35> 10.0.1.35> (ex: mkinitrd /boot/initrd-2.6.22.9-desktop586-1mdv.img 2.6.22.9-desktop586-1mdv) 10.0.1.35> Format of install_device not recognized. 10.0.1.35> Usage: grub-install [OPTION] install_device 10.0.1.35> Install GRUB on your drive. 10.0.1.35> 10.0.1.35> -h, --help print this message and exit 10.0.1.35> -v, --version print the version information and exit 10.0.1.35> --root-directory=DIR install GRUB images under the directory DIR 10.0.1.35> instead of the root directory 10.0.1.35> --grub-shell=FILE use FILE as the grub shell 10.0.1.35> --no-floppy do not probe any floppy drive 10.0.1.35> --force-lba force GRUB to use LBA mode even for a buggy 10.0.1.35> BIOS 10.0.1.35> --recheck probe a device map even if it already exists 10.0.1.35> This flag is unreliable and its use is 10.0.1.35> strongly discouraged. 10.0.1.35> 10.0.1.35> INSTALL_DEVICE can be a GRUB device name or a system device filename. 10.0.1.35> 10.0.1.35> grub-install copies GRUB images into the DIR/boot directory specfied by 10.0.1.35> --root-directory, and uses the grub shell to install grub into the boot 10.0.1.35> sector. 10.0.1.35> 10.0.1.35> Report bugs to . 10.0.1.35> umount: /mnt/disk/dev: not mounted 10.0.1.35> Umounting /dev/sdb1...OK 10.0.1.35> Umounting /dev/sda5...OK 10.0.1.35> AUTH not understood 10.0.1.35> Local directory now /tmp