saned -d128
[saned] main: starting debug mode (level 128)
[saned] main: trying to get port for service `sane-port' (getaddrinfo)
[saned] main: [0] socket () using IPv6
[saned] main: [0] setsockopt ()
[saned] main: [0] bind () to port 6566
[saned] main: [0] listen ()
[saned] main: [1] socket () using IPv4
[saned] main: [1] setsockopt ()
[saned] main: [1] bind () to port 6566
[saned] main: [1] bind failed: Address already in use
[saned] main: waiting for control connection
[saned] saned (AF-indep+IPv6) from sane-backends 1.0.18-cvs ready
[saned] check_host: detected an IPv4-mapped address
[saned] check_host: access by remote host: ::ffff:192.168.2.11
[saned] check_host: remote host is not IN_LOOPBACK nor IN6_LOOPBACK
[saned] check_host: local hostname: ltsp
[saned] check_host: local hostname(s) (from DNS): ltsp
[saned] check_host: local hostname(s) (from DNS): (null)
[saned] check_host: local hostname(s) (from DNS): (null)
[saned] check_host: remote host doesn't have same addr as local
[saned] check_host: opening config file: /etc/hosts.equiv
[saned] check_host: can't open config file: /etc/hosts.equiv (No such file or directory)
[saned] check_host: opening config file: saned.conf
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `# saned.conf'
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `# The contents of the saned.conf  file  is  a  list  of  host  names,  IP'
[saned] check_host: config file line: `# addresses or IP subnets (CIDR notation) that are permitted to use local'
[saned] check_host: config file line: `# SANE devices. IPv6 addresses must be enclosed in brackets,  and  should'
[saned] check_host: config file line: `# always  be specified in their compressed form.'
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `# The hostname matching is not case-sensitive.'
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `#scan-client.somedomain.firm'
[saned] check_host: config file line: `#192.168.0.1'
[saned] check_host: config file line: `#192.168.0.1/29'
[saned] check_host: config file line: `#[2001:7a8:185e::42:12]'
[saned] check_host: config file line: `#[2001:7a8:185e::42:12]/64'
[saned] check_host: config file line: `#'
[saned] check_host: config file line: `# NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and'
[saned] check_host: config file line: `# /etc/services must also be properly configured to start'
[saned] check_host: config file line: `# the saned daemon as documented in saned(8), services(4)'
[saned] check_host: config file line: `# and inetd.conf(4) (or xinetd.conf(5)).'
[saned] check_host: config file line: `192.168.2.11'
[saned] check_host: access granted from IP address ::ffff:192.168.2.11 (IPv4-mapped)
[saned] init: access granted
[saned] init: access granted to stefan@::ffff:192.168.2.11
[saned] process_request: waiting for request
[saned] process_request: got request 1
[sanei_debug] Setting debug level of fujitsu to 30.
[fujitsu] sane_init: start
[fujitsu] sane_init: fujitsu backend 1.0.52, from sane-backends 1.0.18-cvs
[fujitsu] sane_init: finish
[fujitsu] sane_get_devices: start
[fujitsu] find_scanners: start
[fujitsu] find_scanners: reading config file fujitsu.conf
[fujitsu] find_scanners: setting "buffer-size" to 65536
[fujitsu] find_scanners: looking for 'scsi FUJITSU'
[fujitsu] attach_one: start
[fujitsu] attach_one: looking for '/dev/sg0'
[fujitsu] connect_fd: start
[fujitsu] connect_fd: opening SCSI device
[fujitsu] wait_scanner: start
[fujitsu] do_scsi_cmd: start
[fujitsu] cmd: writing 6 bytes
[fujitsu] cmd: >>
[fujitsu] 000: 00 00 00 00 00 00
[fujitsu] sense_handler: start
[fujitsu] Sense=0x6, ASC=00, ASCQ=00, EOM=1, ILI=0, info=00000000
[fujitsu] Unit attention: device reset
[fujitsu] do_scsi_cmd: finish
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: finish
[fujitsu] init_inquire: start
[fujitsu] do_scsi_cmd: start
[fujitsu] cmd: writing 6 bytes
[fujitsu] cmd: >>
[fujitsu] 000: 12 00 00 00 60 00
[fujitsu] in: reading 96 bytes
[fujitsu] in: <<
[fujitsu] 000: 06 00 02 02 5b 00 00 10 46 55 4a 49 54 53 55 20
[fujitsu] 010: 66 69 2d 34 31 32 30 43 64 6a 20 20 20 20 20 20
[fujitsu] 020: 30 4b 30 30 00 00 00 00 00 00 00 00 03 00 00 00
[fujitsu] 030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[fujitsu] 040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[fujitsu] 050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[fujitsu] in: read 96 bytes
[fujitsu] do_scsi_cmd: finish
[fujitsu] init_inquire: Found FUJITSU scanner fi-4120Cdj version 0K00 at /dev/sg0
[fujitsu] inquiry options
[fujitsu]   color offset: 0 lines
[fujitsu]   long color scan: 1
[fujitsu]   long gray scan: 1
[fujitsu]   3091 duplex: 0
[fujitsu]   background front: 0
[fujitsu]   background back: 0
[fujitsu]   emulation mode: 0
[fujitsu]   duplex offset: 0 lines
[fujitsu] init_inquire: finish
[fujitsu] init_vpd: start
[fujitsu] do_scsi_cmd: start
[fujitsu] cmd: writing 6 bytes
[fujitsu] cmd: >>
[fujitsu] 000: 12 01 f0 00 68 00
[fujitsu] in: reading 104 bytes
[fujitsu] in: <<
[fujitsu] 000: 06 f0 02 00 5f 02 58 02 58 11 02 58 02 58 00 32
[fujitsu] 010: 00 32 ff fc 00 00 13 ec 00 00 41 a0 8f 00 00 00
[fujitsu] 020: 92 0a 01 00 00 00 00 00 ff bf 00 04 00 00 00 00
[fujitsu] 030: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[fujitsu] 040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[fujitsu] 050: 00 00 00 ff 00 00 41 01 a8 40 08 00 00 00 00 00
[fujitsu] 060: 00 00 00 00 00 00 00 00
[fujitsu] in: read 104 bytes
[fujitsu] do_scsi_cmd: finish
[fujitsu] init_vpd: length=5f
[fujitsu] standard options
[fujitsu]   basic x res: 600 dpi
[fujitsu]   basic y res: 600 dpi
[fujitsu]   step x res: 1 dpi
[fujitsu]   step y res: 1 dpi
[fujitsu]   max x res: 600 dpi
[fujitsu]   max y res: 600 dpi
[fujitsu]   min x res: 50 dpi
[fujitsu]   min y res: 50 dpi
[fujitsu]   60 dpi: 1
[fujitsu]   75 dpi: 1
[fujitsu]   100 dpi: 1
[fujitsu]   120 dpi: 1
[fujitsu]   150 dpi: 1
[fujitsu]   160 dpi: 1
[fujitsu]   180 dpi: 1
[fujitsu]   200 dpi: 1
[fujitsu]   240 dpi: 1
[fujitsu]   300 dpi: 1
[fujitsu]   320 dpi: 1
[fujitsu]   400 dpi: 1
[fujitsu]   480 dpi: 1
[fujitsu]   600 dpi: 1
[fujitsu]   800 dpi: 0
[fujitsu]   1200 dpi: 0
[fujitsu]   max width: 8.50 inches
[fujitsu]   max length: 28.00 inches
[fujitsu]   overflow: 1
[fujitsu]   monochrome: 1
[fujitsu]   halftone: 1
[fujitsu]   grayscale: 1
[fujitsu]   color_monochrome: 0
[fujitsu]   color_halftone: 0
[fujitsu]   color_grayscale: 1
[fujitsu] vendor options
[fujitsu]   operator panel: 1
[fujitsu]   barcode: 0
[fujitsu]   imprinter: 0
[fujitsu]   duplex: 1
[fujitsu]   transparency: 0
[fujitsu]   flatbed: 0
[fujitsu]   adf: 1
[fujitsu]   A/D bits: 10
[fujitsu]   buffer bytes: 16777216
[fujitsu]   mode_sense cmd: 1
[fujitsu]   subwindow cmd: 0
[fujitsu]   endorser cmd: 0
[fujitsu]   hardware status cmd: 1
[fujitsu]   scanner control cmd: 1
[fujitsu]   brightness steps: 0
[fujitsu]   threshold steps: 255
[fujitsu]   contrast steps: 0
[fujitsu]   built in gamma patterns: 0
[fujitsu]   download gamma patterns: 1
[fujitsu]   built in dither patterns: 4
[fujitsu]   download dither patterns: 1
[fujitsu]   black and white rif: 1
[fujitsu]   automatic binary DTC: 0
[fujitsu]   simplified DTC: 1
[fujitsu]   outline extraction: 0
[fujitsu]   image emphasis: 1
[fujitsu]   automatic separation: 0
[fujitsu]   mirror image: 0
[fujitsu]   white level follower: 0
[fujitsu]   subwindow: 0
[fujitsu]   compression MH: 0
[fujitsu]   compression MR: 0
[fujitsu]   compression MMR: 0
[fujitsu]   compression JBIG: 0
[fujitsu]   compression JPG1: 1
[fujitsu]   compression JPG2: 0
[fujitsu]   compression JPG3: 0
[fujitsu]   imprinter mech: 0
[fujitsu]   imprinter stamp: 0
[fujitsu]   imprinter elec: 0
[fujitsu]   imprinter max id: 0
[fujitsu]   imprinter size: 0
[fujitsu] init_vpd: finish
[fujitsu] init_ms: start
[fujitsu]   prepick: 0
[fujitsu]   sleep: 1
[fujitsu]   duplex: 0
[fujitsu]   rand: 0
[fujitsu]   bg: 0
[fujitsu]   df: 1
[fujitsu]   dropout: 1
[fujitsu]   buff: 0
[fujitsu]   auto: 1
[fujitsu]   lamp: 0
[fujitsu]   jobsep: 0
[fujitsu] init_ms: finish
[fujitsu] init_model: start
[fujitsu] init_model: finish
[fujitsu] init_user: start
[fujitsu] init_user: finish
[fujitsu] init_options: start
[fujitsu] init_options: finish
[fujitsu] disconnect_fd: start
[fujitsu] disconnecting scsi device
[fujitsu] disconnect_fd: finish
[fujitsu] attach_one: finish
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1041'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1042'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1095'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1096'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x1097'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10ad'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10ae'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10af'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10e0'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10e1'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10e2'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10e7'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10f2'
[fujitsu] find_scanners: looking for 'usb 0x04c5 0x10fe'
[fujitsu] find_scanners: found scanner /dev/sg0
[fujitsu] find_scanners: found 1 scanner(s)
[fujitsu] find_scanners: finish
[fujitsu] sane_get_devices: finish
[saned] process_request: waiting for request
[saned] process_request: got request 2
[saned] process_request: access to resource `fujitsu' granted
[fujitsu] sane_open: start
[fujitsu] sane_open: searching currently attached scanners
[fujitsu] sane_open: device /dev/sg0 requested
[fujitsu] sane_open: device /dev/sg0 found
[fujitsu] connect_fd: start
[fujitsu] connect_fd: opening SCSI device
[fujitsu] wait_scanner: start
[fujitsu] do_scsi_cmd: start
[fujitsu] cmd: writing 6 bytes
[fujitsu] cmd: >>
[fujitsu] 000: 00 00 00 00 00 00
[fujitsu] do_scsi_cmd: finish
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: finish
[fujitsu] sane_open: finish
[saned] process_request: sane_open returned: Success
[saned] process_request: waiting for request
[saned] process_request: got request 4
[fujitsu] sane_control_option: get value for '' (0)
[fujitsu] sane_get_option_descriptor: 0
[fujitsu] sane_get_option_descriptor: 1
[fujitsu] sane_get_option_descriptor: 2
[fujitsu] sane_get_option_descriptor: 3
[fujitsu] sane_get_option_descriptor: 4
[fujitsu] sane_get_option_descriptor: 5
[fujitsu] sane_get_option_descriptor: 6
[fujitsu] sane_get_option_descriptor: 7
[fujitsu] sane_get_option_descriptor: 8
[fujitsu] sane_get_option_descriptor: 9
[fujitsu] sane_get_option_descriptor: 10
[fujitsu] sane_get_option_descriptor: 11
[fujitsu] sane_get_option_descriptor: 12
[fujitsu] sane_get_option_descriptor: 13
[fujitsu] sane_get_option_descriptor: 14
[fujitsu] sane_get_option_descriptor: 15
[fujitsu] sane_get_option_descriptor: 16
[fujitsu] sane_get_option_descriptor: 17
[fujitsu] sane_get_option_descriptor: 18
[fujitsu] sane_get_option_descriptor: 19
[fujitsu] sane_get_option_descriptor: 20
[fujitsu] sane_get_option_descriptor: 21
[fujitsu] sane_get_option_descriptor: 22
[fujitsu] sane_get_option_descriptor: 23
[fujitsu] sane_get_option_descriptor: 24
[fujitsu] sane_get_option_descriptor: 25
[fujitsu] sane_get_option_descriptor: 26
[fujitsu] sane_get_option_descriptor: 27
[fujitsu] sane_get_option_descriptor: 28
[fujitsu] sane_get_option_descriptor: 29
[fujitsu] sane_get_option_descriptor: 30
[fujitsu] sane_get_option_descriptor: 31
[fujitsu] sane_get_option_descriptor: 32
[fujitsu] sane_get_option_descriptor: 33
[fujitsu] sane_get_option_descriptor: 34
[fujitsu] sane_get_option_descriptor: 35
[fujitsu] sane_get_option_descriptor: 36
[fujitsu] sane_get_option_descriptor: 37
[fujitsu] sane_get_option_descriptor: 38
[fujitsu] sane_get_option_descriptor: 39
[fujitsu] sane_get_option_descriptor: 40
[fujitsu] sane_get_option_descriptor: 41
[fujitsu] sane_get_option_descriptor: 42
[fujitsu] sane_get_option_descriptor: 43
[fujitsu] sane_get_option_descriptor: 44
[fujitsu] sane_get_option_descriptor: 45
[fujitsu] sane_get_option_descriptor: 46
[fujitsu] sane_get_option_descriptor: 47
[fujitsu] sane_get_option_descriptor: 48
[fujitsu] sane_get_option_descriptor: 49
[fujitsu] sane_get_option_descriptor: 50
[fujitsu] sane_get_option_descriptor: 51
[fujitsu] sane_get_option_descriptor: 52
[fujitsu] sane_get_option_descriptor: 53
[fujitsu] sane_get_option_descriptor: 54
[saned] process_request: waiting for request
[saned] process_request: got request 5
[fujitsu] sane_control_option: get value for '' (0)
[saned] process_request: waiting for request
[saned] process_request: got request 5
[fujitsu] sane_control_option: get value for '' (0)
[saned] process_request: waiting for request
[saned] process_request: got request 5
[fujitsu] sane_control_option: get value for 'br-x' (9)
[saned] process_request: waiting for request
[saned] process_request: got request 5
[fujitsu] sane_control_option: get value for 'br-y' (10)
[saned] process_request: waiting for request
[saned] process_request: got request 5
[fujitsu] sane_control_option: get value for 'tl-x' (7)
[saned] process_request: waiting for request
[saned] process_request: got request 5
[fujitsu] sane_control_option: get value for 'tl-y' (8)
[saned] process_request: waiting for request
[saned] process_request: got request 5
[fujitsu] sane_control_option: get value for 'tl-x' (7)
[saned] process_request: waiting for request
[saned] process_request: got request 5
[fujitsu] sane_control_option: set value for 'br-x' (9)
[saned] process_request: waiting for request
[saned] process_request: got request 5
[fujitsu] sane_control_option: get value for 'tl-y' (8)
[saned] process_request: waiting for request
[saned] process_request: got request 5
[fujitsu] sane_control_option: set value for 'br-y' (10)
[saned] process_request: waiting for request
[saned] process_request: got request 7
[saned] start_scan: using port 57982 for data
[fujitsu] sane_start: start
[fujitsu] started=0, img_count=0, source=1
[fujitsu] sane_get_parameters: start
[fujitsu] sane_get_parameters: xres=600, tlx=0, brx=10200, pw=10200, maxx=10200
[fujitsu] sane_get_parameters: yres=600, tly=0, bry=13200, ph=13200, maxy=33600
[fujitsu] sane_get_parameters: user_x=5100, user_y=6600
[fujitsu] sane_get_parameters: updating
[fujitsu] sane_get_parameters: scan_x=5096, Bpl=637, depth=1
[fujitsu] sane_get_parameters: scan_y=6600, frame=0, last=1
[fujitsu] sane_get_parameters: finish
[fujitsu] set_window: start
[fujitsu] do_scsi_cmd: start
[fujitsu] cmd: writing 10 bytes
[fujitsu] cmd: >>
[fujitsu] 000: 24 00 00 00 00 00 00 00 68 00
[fujitsu] out: writing 104 bytes
[fujitsu] out: >>
[fujitsu] 000: 00 00 00 00 00 00 00 60 00 00 02 58 02 58 00 00
[fujitsu] 010: 00 00 00 00 00 00 00 00 27 d1 00 00 33 90 00 00
[fujitsu] 020: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
[fujitsu] 030: 00 80 00 00 00 00 00 00 00 00 00 00 00 c0 00 00
[fujitsu] 040: 27 d8 00 00 33 90 00 00 00 00 00 00 00 00 00 00
[fujitsu] 050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[fujitsu] 060: 00 00 00 00 00 00 00 00
[fujitsu] do_scsi_cmd: finish
[fujitsu] set_window: finish
[fujitsu] scanner_control: start
[fujitsu] scanner_control: power up lamp...
[fujitsu] do_scsi_cmd: start
[fujitsu] cmd: writing 10 bytes
[fujitsu] cmd: >>
[fujitsu] 000: f1 05 00 00 00 00 00 00 00 00
[fujitsu] do_scsi_cmd: finish
[fujitsu] scanner_control: lamp on, tries 1, ret 0
[fujitsu] scanner_control: finish
[fujitsu] setup_buffers: start
[fujitsu] setup_buffers: finish
[fujitsu] object_position: start
[fujitsu] object_position: load
[fujitsu] do_scsi_cmd: start
[fujitsu] cmd: writing 10 bytes
[fujitsu] cmd: >>
[fujitsu] 000: 31 01 00 00 00 00 00 00 00 00
[fujitsu] do_scsi_cmd: finish
[fujitsu] wait_scanner: start
[fujitsu] do_scsi_cmd: start
[fujitsu] cmd: writing 6 bytes
[fujitsu] cmd: >>
[fujitsu] 000: 00 00 00 00 00 00
[fujitsu] do_scsi_cmd: finish
[fujitsu] wait_scanner: finish
[fujitsu] object_position: finish
[fujitsu] start_scan: start
[fujitsu] do_scsi_cmd: start
[fujitsu] cmd: writing 6 bytes
[fujitsu] cmd: >>
[fujitsu] 000: 1b 00 00 00 01 00
[fujitsu] out: writing 1 bytes
[fujitsu] out: >>
[fujitsu] 000: 00
[fujitsu] do_scsi_cmd: finish
[fujitsu] start_scan: finish
[fujitsu] started=1, img_count=0, source=1
[fujitsu] sane_start: finish
[saned] process_request: waiting for data connection
[saned] process_request: access to data port from ::ffff:192.168.2.11
[saned] do_scan: start
[fujitsu] sane_set_io_mode
[fujitsu] 1 0x8056fd0
[fujitsu] sane_get_select_fd
[fujitsu] 0x8056fd0 -1
[saned] do_scan: trying to read 8188 bytes from scanner
[fujitsu] sane_read: start
[fujitsu] read_from_scanner: start
[fujitsu] read_from_scanner: si:0 to:4204200 rx:0 re:4204200 bu:65536 pa:64974
[fujitsu] do_scsi_cmd: start
[fujitsu] cmd: writing 10 bytes
[fujitsu] cmd: >>
[fujitsu] 000: 28 00 00 00 00 00 00 fd ce 00
[fujitsu] in: reading 64974 bytes