pegasus ~ # hcidump -XV
HCI sniffer - Bluetooth packet analyzer ver 1.40
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:02:76:D3:85:43 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5 
> HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 42 bdaddr 00:02:76:D3:85:43 type ACL encrypt 0x00
< ACL data: handle 42 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
    handle 42
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 42 packets 1
> HCI Event: Command Status (0x0f) plen 4
    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
    bdaddr 00:02:76:D3:85:43 mode 1
> HCI Event: Max Slots Change (0x1b) plen 3
    handle 42 slots 3
> ACL data: handle 42 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x005f scid 0x0040 result 1 status 2
      Connection pending - Authorization pending
> ACL data: handle 42 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x005f scid 0x0040 result 0 status 0
      Connection successful
< ACL data: handle 42 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x005f flags 0x00 clen 0
> HCI Event: Command Status (0x0f) plen 4
    Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
    handle 42 policy 0x0f
    Link policy: RSWITCH HOLD SNIFF PARK 
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 42 packets 1
> HCI Event: Command Complete (0x0e) plen 6
    Write Link Policy Settings (0x02|0x000d) ncmd 1
    status 0x00 handle 42
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr 00:02:76:D3:85:43 mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
    Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> ACL data: handle 42 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
      Success
> ACL data: handle 42 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
      MTU 48 
< ACL data: handle 42 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x005f flags 0x00 result 0 clen 4
      Success
      MTU 48 
< ACL data: handle 42 flags 0x02 dlen 17
    L2CAP(d): cid 0x005f len 13 [psm 1]
        SDP SS Req: tid 0x0 len 0x8
          pat uuid-16 0x1108 (Headset)
          max 64
          cont 00
> HCI Event: Read Remote Supported Features (0x0b) plen 11
    status 0x00 handle 42
    Features: 0xfd 0xfe 0x8f 0x80 0x0b 0xa8 0x00 0x80
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 42 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 14
    L2CAP(d): cid 0x0040 len 10 [psm 1]
        SDP SS Rsp: tid 0x0 len 0x5
          count 0
          cont 00
> HCI Event: Remote Name Req Complete (0x07) plen 255
    status 0x00 bdaddr 00:02:76:D3:85:43 name 'Nokia BH-203'
< ACL data: handle 42 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x005f scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x005f scid 0x0040
< HCI Command: Disconnect (0x01|0x0006) plen 3
    handle 42 reason 0x13
    Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
    Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
    status 0x00 handle 42 reason 0x16
    Reason: Connection Terminated by Local Host