/ Config file read, 1024 bytes Welcome Welcome to yaboot version 1.3.13 (Red Hat 1.3.13-4.fc7) Enter "help" to get some basic usage information boot: linux f7 boot: f7 Please wait, loading kernel... Elf32 kernel loaded... zImage starting: loaded at 0x004001f8 (sp: 0x00eff930) Allocating 0x3e7e08 bytes for kernel ... OF version = 'IBM,TCP05287' gunzipping (0x00800000 <- 0x004071f8:0x005c95d6)...done 0x3be8a4 bytes Linux/PowerPC load: root=/dev/VolGroup00/LogVol00 ro Finalizing device tree... using OF tree (promptr=00c1a078) OF stdout device is: /pci@80000000/isa@b/serial@i3f8 command line: root=/dev/VolGroup00/LogVol00 ro memory layout at init: alloc_bottom : 00bec000 alloc_top : 20000000 alloc_top_hi : 20000000 rmo_top : 20000000 ram_top : 20000000 Looking for displays instantiating rtas at 0x1ffe5000 ... done 00000000 : boot cpu 00000000 copying OF device tree ... Building dt strings... Building dt structure... Device tree strings 0x010ed000 -> 0x010edcac Device tree struct 0x010ee000 -> 0x010f2000 Calling quiesce ... returning from prom_init Using CHRP machine description Total memory = 512MB; using 1024kB for hash table (at cff00000) Linux version 2.6.23.1-13.fc7smp (patrick@hades.puzzled.xs4all.nl) (gcc version7 console [udbg0] enabled chrp type = 5 [IBM or Longtrail] PCI buses 0..1 controlled by /pci@80000000 at 80000000 Zone PFN ranges: DMA 0 -> 131072 Normal 131072 -> 131072 HighMem 131072 -> 131072 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 131072 Built 1 zonelists in Zone order. Total pages: 130048 Kernel command line: root=/dev/VolGroup00/LogVol00 ro OpenPIC at fcec0000 OpenPIC irqs 0..15 in IDU mpic: Setting up MPIC " MPIC " version 1.0 at fcec0000, max 4 CPUs mpic: ISU size: 16, shift: 4, mask: f mpic: Initializing for 16 sources i8259 legacy interrupt controller initialized PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 514176k/524288k available (3632k kernel code, 9724k reserved, 124k data) Mount-cache hash table entries: 512 device-tree: Duplicate name in /cpus/PowerPC,604e@0, renamed to "l2-cache#1" Brought up 1 CPUs NET: Registered protocol family 16 CHRP nvram contains 32768 bytes RTAS Event Scan Rate: 1 (14750 jiffies) PCI: Probing PCI hardware SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 7, 786432 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Generic RTC Driver v1.07 Macintosh non-volatile memory driver v1.1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A console handover: boot [u] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A serial8250.0: ttyS2 at I/O 0x898 (irq = 15) is a 16550A Floppy drive(s): fd0 is 2.88M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded pcnet32.c:v1.33 27.Jun.2006 tsbogend@alpha.franken.de PCI: Enabling device 0000:00:0c.0 (0140 -> 0143) pcnet32: PCnet/FAST 79C971 at 0xbff800, 00 04 ac 31 10 8c tx_start_pt(0x0c00):~220 bytes, BCR18(68e1):BurstWrEn BurstRdEn DWordIO NoU SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 17. pcnet32: Found PHY 2000:5c01 at address 1. eth0: registered as PCnet/FAST 79C971 pcnet32: 1 cards_found. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx W82C105: IDE controller at PCI slot 0000:00:0b.1 PCI: Enabling device 0000:00:0b.1 (0140 -> 0141) W82C105: chipset revision 5 W82C105: 100% native mode on irq 255 ide0: BM-DMA at 0xbff000-0xbff007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xbff008-0xbff00f, BIOS settings: hdc:pio, hdd:pio PCI: Enabling device 0000:00:10.0 (0140 -> 0143) sym0: <875> rev 0x4 at pci 0000:00:10.0 irq 18 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 scsi 0:0:2:0: Direct-Access IBM DDRS-34560D DC1B PQ: 0 ANSI: 2 target0:0:2: tagged command queuing enabled, command queue depth 16. target0:0:2: Beginning Domain Validation target0:0:2: asynchronous target0:0:2: wide asynchronous target0:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15) target0:0:2: Domain Validation skipping write tests target0:0:2: Ending Domain Validation scsi 0:0:3:0: CD-ROM IBM CDRM00203 1_00 PQ: 0 ANSI: 2 target0:0:3: Beginning Domain Validation target0:0:3: asynchronous target0:0:3: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) target0:0:3: Domain Validation skipping write tests target0:0:3: Ending Domain Validation target0:0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15) scsi 0:0:4:0: Direct-Access IBM DDRS-34560D DC2G PQ: 0 ANSI: 2 target0:0:4: tagged command queuing enabled, command queue depth 16. target0:0:4: Beginning Domain Validation target0:0:4: asynchronous target0:0:4: wide asynchronous target0:0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15) target0:0:4: Domain Validation skipping write tests target0:0:4: Ending Domain Validation st: Version 20070203, fixed bufsize 32768, s/g segs 256 sd 0:0:2:0: [sda] 8925000 512-byte hardware sectors (4570 MB) sd 0:0:2:0: [sda] Write Protect is off sd 0:0:2:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPA sd 0:0:2:0: [sda] 8925000 512-byte hardware sectors (4570 MB) sd 0:0:2:0: [sda] Write Protect is off sd 0:0:2:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPA sda: sda1 sda2 sda3 sd 0:0:2:0: [sda] Attached SCSI disk sd 0:0:4:0: [sdb] 8813870 512-byte hardware sectors (4513 MB) sd 0:0:4:0: [sdb] Write Protect is off sd 0:0:4:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DA sd 0:0:4:0: [sdb] 8813870 512-byte hardware sectors (4513 MB) sd 0:0:4:0: [sdb] Write Protect is off sd 0:0:4:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DA sdb: sdb1 sd 0:0:4:0: [sdb] Attached SCSI disk sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.20 sd 0:0:2:0: Attached scsi generic sg0 type 0 sr 0:0:3:0: Attached scsi generic sg1 type 5 sd 0:0:4:0: Attached scsi generic sg2 type 0 usbmon: debugfs is not available USB Universal Host Controller Interface driver v3.0 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice atkbd.c: keyboard reset failed on isa0060/serio0 atkbd.c: keyboard reset failed on isa0060/serio1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 VFS: Cannot open root device "VolGroup00/LogVol00" or unknown-block(0,0) Please append a correct "root=" boot option; here are the available partitions: 0800 4462500 sda driver: sd 0801 4340 sda1 0802 100533 sda2 0803 4353516 sda3 0810 4406935 sdb driver: sd 0811 4403767 sdb1 0b00 1048575 sr0 driver: sr Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) Rebooting in 180 seconds..