Booting 'hdc1:/boot/vmlinuz BOOT_IMAGE=linux root=/dev/hdc1 console=ttyS0,11520 0 video=gx1fb:monitor:640x480@72,mode:640x480-16@72.crt:1 ide=nodma ide0=noprob e initrd=hdc1:/boot/initrd.img' Found Linux version 2.6.23.1-rt5frodan (root@r1.paris) #1 PREEMPT RT Tue Oct 30 11:59:36 CET 2007 bzImage. Loading kernel... ok Loading initrd... ok Jumping to entry point... Linux version 2.6.23.1-rt5frodan (root@r1.paris) (gcc version 4.2.2 20070909 (prerelease) (4.2.2-0.RC.1mdv2008.0)) #1 PREEMPT RT Tue Oct 30 11:59:36 CET 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000000fe00000 (usable) 254MB LOWMEM available. Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 65024 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 65024 DMI not present or invalid. Allocating PCI resources starting at 10000000 (gap: 0fe00000:f0200000) Real-Time Preemption Support (C) 2004-2007 Ingo Molnar Built 1 zonelists in Zone order. Total pages: 64516 Kernel command line: BOOT_IMAGE=linux root=/dev/hdc1 console=ttyS0,115200 video=gx1fb:monitor:640x480@72,mode:640x480-16@72.crt:1 ide=nodma ide0=noprobe ide_setup: ide=nodma : Prevented DMA ide_setup: ide0=noprobe Initializing CPU#0 WARNING: experimental RCU implementation. CPU 0 irqstacks, hard=c0338000 soft=c0337000 PID hash table entries: 1024 (order: 10, 4096 bytes) Detected 299.234 MHz processor. Console: colour dummy device 80x25 console [ttyS0] enabled Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 254396k/260096k available (1576k kernel code, 5100k reserved, 513k data, 160k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffffb000 - 0xfffff000 ( 16 kB) vmalloc : 0xd0800000 - 0xffff9000 ( 759 MB) lowmem : 0xc0000000 - 0xcfe00000 ( 254 MB) .init : 0xc030c000 - 0xc0334000 ( 160 kB) .data : 0xc028a0d5 - 0xc030a8ac ( 513 kB) .text : 0xc0100000 - 0xc028a0d5 (1576 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 600.02 BogoMIPS (lpj=1000037) Mount-cache hash table entries: 512 Working around Cyrix MediaGX virtual DMA bugs. Enable Memory-Write-back mode on Cyrix/NSC processor. Enable Memory access reorder on Cyrix/NSC processor. Enable Incrementor on Cyrix/NSC processor. Compat vDSO mapped to ffffe000. CPU: NSC Geode(TM) Integrated Processor by National Semi stepping 02 Checking 'hlt' instruction... OK. NET: Registered protocol family 16 PCI: Using configuration type 1 Setting up standard PCI resources Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: PnP BIOS support was not detected. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Using IRQ router NatSemi [1078/0100] at 0000:00:12.0 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 6, 294912 bytes) TCP bind hash table entries: 8192 (order: 5, 229376 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 85k freed Geode GX1: 00,9c,f8,bb,01,05 Geode GX1: Internal IOBASE at 0x40000000 Geode GX1: SMM is disabled Geode GX1: Suspend on HLT feature enabled Geode GX1: Write through between 640kiB/1MiB is enabled Geode GX1: Reordering between 0x00000000/0x3fffffff is enabled Geode GX1: Reordering between 0x40000000/0x7fffffff is disabled Geode GX1: Reordering between 0x80000000/0xbfffffff is disabled Geode GX1: Reordering between 0xc0000000/0xffffffff is disabled Geode GX1: FPU fast mode enabled Geode GX1: DTE cache enabled Geode GX1: Memory Read Bypass enabled Geode GX1: IO Recovery Time is 6 clocks Geode GX1: MMX instructions are enabled Geode GX1 Chipset Support (c) Juergen Beisert 2007 juergen@kreuzholzen.de Geode GX1: Forcing round robin policy due to active video Geode GX1: 0x00705620, 0x92162008, 0x00000018, 0x3A733225 Geode GX1: Memory base clock is one fourth the CPU clock Geode GX1: Memory refresh rate is 2048 cpu clocks Geode GX1: SDCLOCK shift is 1.5 clocks Geode GX1: Read Data Phase is 1 clocks Geode GX1: CAS latency: 3 clocks Geode GX1: RFSH to RFSH/ACT Period: 11 clocks Geode GX1: ACT to PRE Period: 8 clocks Geode GX1: PRE to ACT Period: 3 clocks Geode GX1: ACT to Read/Write Delay: 3 clocks Geode GX1: ACT(0) to ACT(1) Period: 2 clocks Geode GX1: Data-in to PRE Period: 2 clocks Geode GX1: XBUS round robin: active Geode GX1: Scratch Pad Ram and Video Instructions disabled Geode GX1: Full memory size is 262144kiB Geode GX1: Top of memory is at 0x0FDFFFFF Geode GX1: Video memory size is 2048kiB Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler anticipatory registered io scheduler cfq registered (default) PCI: Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x10) Geode GX1 Framebuffer 0000:00:12.4: 2048 Kibyte of video memory at 0x40800000 Geode GX1 Framebuffer 0000:00:12.4: Requested video memory too large Geode GX1 Framebuffer 0000:00:12.4: Requested video memory too large Geode GX1 Framebuffer 0000:00:12.4: Requested video memory too large Geode GX1 Framebuffer 0000:00:12.4: Requested video memory too large Geode GX1 Framebuffer 0000:00:12.4: Requested video memory too large Geode GX1 Framebuffer 0000:00:12.4: X or Y resolution to big (1400, 1050) Geode GX1 Framebuffer 0000:00:12.4: X or Y resolution to big (1400, 1050) Geode GX1 Framebuffer 0000:00:12.4: X or Y resolution to big (1400, 1050) Geode GX1 Framebuffer 0000:00:12.4: Requested video memory too large Geode GX1 Framebuffer 0000:00:12.4: Requested video memory too large Geode GX1 Framebuffer 0000:00:12.4: X or Y resolution to big (1600, 1200) Geode GX1 Framebuffer 0000:00:12.4: Requested video memory too large Geode GX1 Framebuffer 0000:00:12.4: Requested video memory too large Geode GX1 Framebuffer 0000:00:12.4: Requested video memory too large Geode GX1 Framebuffer 0000:00:12.4: X or Y resolution to big (1600, 1200) Geode GX1 Framebuffer 0000:00:12.4: Requested video memory too large Geode GX1 Framebuffer 0000:00:12.4: Requested video memory too large Geode GX1 Framebuffer 0000:00:12.4: X or Y resolution to big (1600, 1200) Geode GX1 Framebuffer 0000:00:12.4: X or Y resolution to big (1680, 1050) Geode GX1 Framebuffer 0000:00:12.4: X or Y resolution to big (1600, 1200) Geode GX1 Framebuffer 0000:00:12.4: Requested video memory too large Geode GX1 Framebuffer 0000:00:12.4: X or Y resolution to big (1800, 1440) Geode GX1 Framebuffer 0000:00:12.4: X or Y resolution to big (1800, 1440) Geode GX1 Framebuffer 0000:00:12.4: X or Y resolution to big (1920, 1200) Geode GX1 Framebuffer 0000:00:12.4: Requested video memory too large Geode GX1 Framebuffer 0000:00:12.4: X or Y resolution to big (1366, 768) Console: switching to colour frame buffer device 80x25 Geode GX1 Framebuffer 0000:00:12.4: fb0: Geode GX1 frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize 8139too Fast Ethernet driver 0.9.28 PCI: Assigned IRQ 10 for device 0000:00:0b.0 eth0: RealTek RTL8139 at 0xd080e000, 00:d0:c9:54:77:48, IRQ 10 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: PC Speaker as /devices/platform/pcspkr/input/input0 Clocksource tsc unstable (delta = -190199527 ns) TCP cubic registered NET: Registered protocol family 1 Using IPI Shortcut mode Freeing unused kernel memory: 160k freed Write protecting the kernel text: 1580k Write protecting the kernel read-only data: 384k Red Hat nash version 4.2.17mdk starting Loading cs5530.ko module CS5530: IDE controller at PCI slot 0000:00:12.2 CS5530: chipset revision 0 CS5530: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:pio hdc: SanDisk SDCFX-1024, CFA DISK drive hdc: applying conservative PIO "downgrade" ide1 at 0x170-0x177,0x376 on irq 15 Loading piix.ko module Mounting /proc filesystem Mounting sysfs Creating device files Creating root device echo: cannot open /sys/power/suspend2/do_resume for write: 2 echo: cannot open /sys/power/tuxonice/do_resume for write: 2 Mounting root filesyKernel panic - not syncing: Attempted to kill init! [] panic+0x50/0x110 [] do_exit+0x820/0x860 [] redirected_tty_write+0x0/0x80 [] vfs_write+0x77/0xb0 [] sys_write+0x41/0x70 [] sys_exit+0xe/0x10 [] syscall_call+0x7/0xb ======================= --------------------------- | preempt count: 00000001 ] | 1-level deep critical section nesting: ---------------------------------------- .. [] .... task_rq_lock+0x12/0x20 .....[<00000000>] .. ( <= _stext+0x3fefff50/0x20)