Linux version 2.6.22.9-91.fc7 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Sep 27 23:10:59 EDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e5800 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fef0000 (usable) BIOS-e820: 000000000fef0000 - 000000000feffc00 (ACPI data) BIOS-e820: 000000000feffc00 - 000000000ff00000 (ACPI NVS) BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 254MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 65264) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 65264 HighMem 65264 -> 65264 early_node_map[1] active PFN ranges 0: 0 -> 65264 On node 0 totalpages: 65264 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 477 pages used for memmap Normal zone: 60691 pages, LIFO batch:15 HighMem zone: 0 pages used for memmap DMI 2.2 present. Using APIC driver default ACPI: RSDP 000F7330, 0014 (r0 PTLTD ) ACPI: RSDT 0FEFCECE, 0028 (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 0FEFFB8C, 0074 (r1 HP HPBDD_IP 6040000 PTL F4240) ACPI: DSDT 0FEFCEF6, 2C96 (r1 INTEL Whitney 6040000 MSFT 100000B) ACPI: FACS 0FEFFFC0, 0040 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000) Built 1 zonelists. Total pages: 64755 Kernel command line: ro root=LABEL=/ rhgb quiet Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0120c000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0791000 soft=c0771000 PID hash table entries: 1024 (order: 10, 4096 bytes) Detected 731.008 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 250320k/261056k available (2108k kernel code, 10124k reserved, 1112k data, 260k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) lowmem : 0xc0000000 - 0xcfef0000 ( 254 MB) .init : 0xc072b000 - 0xc076c000 ( 260 kB) .data : 0xc060f3a8 - 0xc0725504 (1112 kB) .text : 0xc0400000 - 0xc060f3a8 (2108 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 1462.77 BogoMIPS (lpj=731386) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0620) CPU0: Intel Pentium III (Coppermine) stepping 03 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=1536 bytes Time: 12:22:50 Date: 11/02/07 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:02: iomem range 0xfff80000-0xffffffff could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: ec100000-ec1fffff PREFETCH window: 20000000-200fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 98304 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered checking if image is initramfs... it is Switched to high resolution mode on CPU 0 Freeing initrd memory: 3485k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1194006170.164:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 1C0E7986B75803D3 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Invalid PBLK length [5] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel i815 Chipset. agpgart: AGP aperture is 64M @ 0xf0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 15:274:379 Freeing unused kernel memory: 260k freed Write protecting the kernel read-only data: 858k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: UHCI Host Controller uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 5, io base 0x00001820 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:01:01.0: UHCI Host Controller uhci_hcd 0000:01:01.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:01:01.0: irq 5, io base 0x000020c0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:01:01.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:01:01.1: UHCI Host Controller uhci_hcd 0000:01:01.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:01:01.1: irq 5, io base 0x000020e0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-1: new low speed USB device using uhci_hcd and address 2 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:01:01.2[C] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:01:01.2: EHCI Host Controller ehci_hcd 0000:01:01.2: new USB bus registered, assigned bus number 4 ehci_hcd 0000:01:01.2: irq 10, io mem 0xec100000 ehci_hcd 0000:01:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 4 ports detected usb 1-1: configuration #1 chosen from 1 choice input: Logitech USB Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1f.2-1 SCSI subsystem initialized libata version 2.21 loaded. ata_piix 0000:00:1f.1: version 2.11 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/66 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011800 irq 14 ata2: PATA max UDMA/66 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011808 irq 15 ata1.00: ATA-5: ST340016A, 3.10, max UDMA/100 ata1.00: 78165360 sectors, multi 16: LBA ata1.00: configured for UDMA/66 ata2.00: ATAPI: SR244W, T01A, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA ST340016A 3.10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM MITSUMI CD-ROM SR244W T01A PQ: 0 ANSI: 5 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1194006176.445:2): selinux=0 auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH TCO device (Version=1, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 Intel 82802 RNG detected i810_smbus 0000:00:02.0: i810/i815 i2c device found. parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 3c59x: Donald Becker and others. 0000:01:04.0: 3Com PCI 3c905C Tornado at d087e400. ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 usbcore: registered new interface driver snd-usb-audio cannot find the slot for index 0 (range 0-7), error: -16 Intel ICH: probe of 0000:00:1f.5 failed with error -12 NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 No dock devices found. input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 524280k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:524280k IA-32 Microcode Update Driver: v1.14a ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (2039 buckets, 16312 max) eth0: setting full-duplex. audit(1194006208.255:3): audit_pid=1681 old=0 by auid=4294967295 Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 eth0: no IPv6 routers present CIFS VFS: Error connecting to IPv4 socket. Aborting operation CIFS VFS: cifs_mount failed w/return code = -101 eth0: no IPv6 routers present