1ª parte - placa ligada [ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f6f0000 (usable) [ 0.000000] BIOS-e820: 000000001f6f0000 - 000000001f6ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f6ff000 - 000000001f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001f700000 - 000000001f780000 (usable) [ 0.000000] BIOS-e820: 000000001f780000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 503MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 128896) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 128896 [ 0.000000] HighMem 128896 -> 128896 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 128896 [ 0.000000] On node 0 totalpages: 128896 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 975 pages used for memmap [ 0.000000] Normal zone: 123825 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6190 checksum 0 [ 0.000000] ACPI: RSDP 000F6190, 0014 (r0 HP-MCD) [ 0.000000] ACPI: RSDT 1F6F9ED5, 0028 (r1 HP-MCD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 1F6FEF8C, 0074 (r1 HP-MCD GF DSDT 6040000 PTL 1) [ 0.000000] ACPI: DSDT 1F6F9EFD, 508F (r1 HP-MCD GF DSDT 6040000 MSFT 100000D) [ 0.000000] ACPI: FACS 1F6FFFC0, 0040 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000) [ 0.000000] Built 1 zonelists. Total pages: 127889 [ 0.000000] Kernel command line: root=UUID=0c27cd1f-4fb2-4a27-87e0-24ed11a1ff02 ro quiet splash locale=pt_PT [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffd000 (013fd000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 863.810 MHz processor. [ 36.937618] Console: colour VGA+ 80x25 [ 36.938114] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 36.938738] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 36.972740] Memory: 499208k/515584k available (2015k kernel code, 15656k reserved, 916k data, 364k init, 0k highmem) [ 36.972765] virtual kernel memory layout: [ 36.972767] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 36.972771] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 36.972775] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) [ 36.972778] lowmem : 0xc0000000 - 0xdf780000 ( 503 MB) [ 36.972781] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 36.972785] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 36.972788] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 36.972796] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 36.972878] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 37.052881] Calibrating delay using timer specific routine.. 1729.08 BogoMIPS (lpj=3458173) [ 37.052937] Security Framework v1.0.0 initialized [ 37.052957] SELinux: Disabled at boot. [ 37.052993] Mount-cache hash table entries: 512 [ 37.053249] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 37.053272] CPU: L1 I cache: 16K, L1 D cache: 16K [ 37.053279] CPU: L2 cache: 512K [ 37.053285] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 37.053305] Compat vDSO mapped to ffffe000. [ 37.053327] Checking 'hlt' instruction... OK. [ 37.069030] SMP alternatives: switching to UP code [ 37.069319] Freeing SMP alternatives: 11k freed [ 37.069840] Early unpacking initramfs... done [ 37.803440] ACPI: Core revision 20070126 [ 37.803630] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 37.807672] ACPI: setting ELCR to 0200 (from 0620) [ 37.816650] CPU0: Intel(R) Pentium(R) III Mobile CPU 866MHz stepping 01 [ 37.816665] SMP motherboard not detected. [ 37.816671] Local APIC not detected. Using dummy APIC emulation. [ 37.816774] Brought up 1 CPUs [ 37.817079] Booting paravirtualized kernel on bare hardware [ 37.817211] Time: 2:11:26 Date: 10/03/107 [ 37.817273] NET: Registered protocol family 16 [ 37.817516] EISA bus registered [ 37.817543] ACPI: bus type pci registered [ 37.818933] PCI: PCI BIOS revision 2.10 entry at 0xfd98a, last bus=2 [ 37.818939] PCI: Using configuration type 1 [ 37.818943] Setting up standard PCI resources [ 37.838833] ACPI: EC: Look up EC in DSDT [ 37.844053] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 37.846470] ACPI: Interpreter enabled [ 37.846480] ACPI: (supports S0 S1 S3 S4 S5) [ 37.846519] ACPI: Using PIC for interrupt routing [ 37.857628] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 37.857720] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 37.857744] PCI: Probing PCI hardware (bus 00) [ 37.858168] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 37.858177] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 37.858511] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 37.858578] PCI: Transparent bridge - 0000:00:1e.0 [ 37.858763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 37.858886] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 37.864532] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 37.864838] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 37.865069] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 37.865301] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 37.865532] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 37.865738] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 37.865945] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 37.866150] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 37.866356] Linux Plug and Play Support v0.97 (c) Adam Belay [ 37.866382] pnp: PnP ACPI init [ 37.866402] ACPI: bus type pnp registered [ 37.874153] pnp: PnP ACPI: found 11 devices [ 37.874159] ACPI: ACPI bus type pnp unregistered [ 37.874168] PnPBIOS: Disabled by ACPI PNP [ 37.874277] PCI: Using ACPI for IRQ routing [ 37.874285] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 37.878182] NET: Registered protocol family 8 [ 37.878188] NET: Registered protocol family 20 [ 37.878345] pnp: 00:01: ioport range 0x7b0-0x7bb has been reserved [ 37.878353] pnp: 00:01: ioport range 0x7c0-0x7df has been reserved [ 37.878360] pnp: 00:01: ioport range 0xbb0-0xbbb has been reserved [ 37.878367] pnp: 00:01: ioport range 0xbc0-0xbdf has been reserved [ 37.878374] pnp: 00:01: ioport range 0xfb0-0xfbb has been reserved [ 37.878381] pnp: 00:01: ioport range 0xfc0-0xfdf has been reserved [ 37.878388] pnp: 00:01: ioport range 0x13b0-0x13bb has been reserved [ 37.878395] pnp: 00:01: ioport range 0x13c0-0x13df has been reserved [ 37.878410] pnp: 00:05: ioport range 0x580-0x587 has been reserved [ 37.878418] pnp: 00:05: iomem range 0xfebffc00-0xfebfffff has been reserved [ 37.878426] pnp: 00:05: iomem range 0xfff80000-0xffffffff could not be reserved [ 37.880598] Time: tsc clocksource has been installed. [ 37.909132] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 37.909139] IO window: 00002800-000028ff [ 37.909146] IO window: 00002c00-00002cff [ 37.909153] PREFETCH window: 30000000-33ffffff [ 37.909160] MEM window: 38000000-3bffffff [ 37.909167] PCI: Bus 7, cardbus bridge: 0000:02:04.1 [ 37.909172] IO window: 00001400-000014ff [ 37.909179] IO window: 00001c00-00001cff [ 37.909186] PREFETCH window: 34000000-37ffffff [ 37.909193] MEM window: 3c000000-3fffffff [ 37.909200] PCI: Bridge: 0000:00:1e.0 [ 37.909205] IO window: 2000-2fff [ 37.909213] MEM window: e0200000-e02fffff [ 37.909221] PREFETCH window: 30000000-37ffffff [ 37.909238] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 37.909256] PCI: Enabling device 0000:02:04.0 (0081 -> 0083) [ 37.909623] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 [ 37.909630] PCI: setting IRQ 9 as level-triggered [ 37.909636] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 37.909649] PCI: Setting latency timer of device 0000:02:04.0 to 64 [ 37.909665] PCI: Enabling device 0000:02:04.1 (0081 -> 0083) [ 37.909978] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 37.909985] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 37.909998] PCI: Setting latency timer of device 0000:02:04.1 to 64 [ 37.910025] NET: Registered protocol family 2 [ 37.948655] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 37.948754] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 37.949278] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 37.949706] TCP: Hash tables configured (established 16384 bind 16384) [ 37.949714] TCP reno registered [ 37.960922] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 [ 38.606489] it is [ 39.361670] Freeing initrd memory: 7340k freed [ 39.362528] audit: initializing netlink socket (disabled) [ 39.362562] audit(1194055886.908:1): initialized [ 39.367870] VFS: Disk quotas dquot_6.5.1 [ 39.368078] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 39.368340] io scheduler noop registered [ 39.368346] io scheduler anticipatory registered [ 39.368352] io scheduler deadline registered [ 39.368397] io scheduler cfq registered (default) [ 39.368426] Boot video device is 0000:00:02.0 [ 39.368814] isapnp: Scanning for PnP cards... [ 39.722815] isapnp: No Plug & Play device found [ 39.784762] Real Time Clock Driver v1.12ac [ 39.784960] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 39.785310] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 39.787544] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 39.788044] input: Macintosh mouse button emulation as /class/input/input0 [ 39.788219] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 39.792459] i8042.c: Detected active multiplexing controller, rev 1.1. [ 39.795061] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 39.795074] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 39.795081] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 39.795087] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 39.795094] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 39.795549] mice: PS/2 mouse device common for all mice [ 39.795959] EISA: Probing bus 0 at eisa.0 [ 39.795979] Cannot allocate resource for EISA slot 1 [ 39.795987] Cannot allocate resource for EISA slot 2 [ 39.796022] EISA: Detected 0 cards. [ 39.796268] TCP cubic registered [ 39.796309] NET: Registered protocol family 1 [ 39.796373] Using IPI No-Shortcut mode [ 39.796749] Magic number: 15:80:156 [ 39.797513] Freeing unused kernel memory: 364k freed [ 40.270872] input: AT Translated Set 2 keyboard as /class/input/input1 [ 40.271225] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 40.467783] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 40.667767] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 40.867683] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 40.867700] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 41.067579] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 41.267456] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 41.390009] AppArmor: AppArmor initialized<5>audit(1194055889.408:2): type=1505 info="AppArmor initialized" pid=1185 [ 41.500964] fuse init (API version 7.8) [ 41.514490] Failure registering capabilities with primary security module. [ 41.634993] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 51.753769] usbcore: registered new interface driver usbfs [ 51.753820] usbcore: registered new interface driver hub [ 51.753875] usbcore: registered new device driver usb [ 51.756902] USB Universal Host Controller Interface driver v3.0 [ 51.757037] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 51.757061] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 51.757069] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 51.757337] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 51.757370] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001800 [ 51.757624] usb usb1: configuration #1 chosen from 1 choice [ 51.757685] hub 1-0:1.0: USB hub found [ 51.757698] hub 1-0:1.0: 2 ports detected [ 51.859244] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 [ 51.859254] PCI: setting IRQ 5 as level-triggered [ 51.859260] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 51.859282] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 51.859290] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 51.859342] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 51.859379] uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001820 [ 51.859603] usb usb2: configuration #1 chosen from 1 choice [ 51.859665] hub 2-0:1.0: USB hub found [ 51.859681] hub 2-0:1.0: 2 ports detected [ 51.963151] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 51.963162] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 51.963184] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 51.963192] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 51.963254] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 51.963291] uhci_hcd 0000:00:1d.2: irq 5, io base 0x00001840 [ 51.963508] usb usb3: configuration #1 chosen from 1 choice [ 51.963569] hub 3-0:1.0: USB hub found [ 51.963585] hub 3-0:1.0: 2 ports detected [ 52.092834] SCSI subsystem initialized [ 52.114031] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 52.114328] libata version 2.21 loaded. [ 52.127934] ata_piix 0000:00:1f.1: version 2.11 [ 52.127958] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 52.127975] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 52.128039] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 52.128283] scsi0 : ata_piix [ 52.128371] scsi1 : ata_piix [ 52.128610] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14 [ 52.128619] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15 [ 52.290801] ata1.00: ATA-6: FUJITSU MHT2040AT, 0022, max UDMA/100 [ 52.290812] ata1.00: 78140160 sectors, multi 16: LBA [ 52.306771] ata1.00: configured for UDMA/100 [ 52.547262] usb 1-1: configuration #1 chosen from 1 choice [ 52.626418] ata2.00: ATAPI: CD-224E, 1.7A, max UDMA/33 [ 52.798373] ata2.00: configured for UDMA/33 [ 52.806186] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2040A 0022 PQ: 0 ANSI: 5 [ 52.807177] scsi 1:0:0:0: CD-ROM TEAC CD-224E 1.7A PQ: 0 ANSI: 5 [ 52.974334] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 52.974343] e100: Copyright(c) 1999-2006 Intel Corporation [ 52.974850] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 [ 52.974858] PCI: setting IRQ 10 as level-triggered [ 52.974865] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 52.998137] e100: eth0: e100_probe: addr 0xe0200000, irq 10, MAC addr 00:02:3F:34:A6:5D [ 53.376950] Floppy drive(s): fd0 is 1.44M [ 53.399736] FDC 0 is a National Semiconductor PC87306 [ 54.191524] usbcore: registered new interface driver hiddev [ 54.217553] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) [ 54.221539] sd 0:0:0:0: [sda] Write Protect is off [ 54.221546] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 54.229532] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 54.237528] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) [ 54.239586] input: Chicony USB Wireless HID Receiver as /class/input/input2 [ 54.239631] input: USB HID v1.11 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1 [ 54.239680] sd 0:0:0:0: [sda] Write Protect is off [ 54.239687] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 54.241518] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 54.241529] sda:<6>hiddev96: USB HID v1.11 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1 [ 54.271109] usbcore: registered new interface driver usbhid [ 54.271118] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 54.281098] sda2 < sda5 sda6 > [ 54.282301] sd 0:0:0:0: [sda] Attached SCSI disk [ 54.292705] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 54.292752] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 54.374700] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 54.374713] Uniform CD-ROM driver Revision: 3.20 [ 54.374827] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 56.016246] Attempting manual resume [ 56.016255] swsusp: Resume From Partition 8:5 [ 56.016259] PM: Checking swsusp image. [ 56.112700] PM: Resume from disk failed. [ 56.848510] kjournald starting. Commit interval 5 seconds [ 56.848536] EXT3-fs: mounted filesystem with ordered data mode. [ 64.012000] Marking TSC unstable due to: possible TSC halt in C2. [ 64.016000] Time: acpi_pm clocksource has been installed. [ 64.436000] Clocksource tsc unstable (delta = -348366671 ns) [ 72.720000] intel_rng: FWH not detected [ 72.768000] iTCO_vendor_support: vendor-support=0 [ 72.768000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 72.768000] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060) [ 72.768000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 72.836000] Linux agpgart interface v0.102 (c) Dave Jones [ 72.848000] agpgart: Detected an Intel 830M Chipset. [ 72.848000] agpgart: Detected 8060K stolen memory. [ 72.860000] agpgart: AGP aperture is 128M @ 0xe8000000 [ 72.888000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 72.896000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 75.048000] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 75.060000] usbcore: registered new interface driver xpad [ 75.060000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6 [ 75.100000] Yenta: CardBus bridge found at 0000:02:04.0 [103c:0021] [ 75.100000] Yenta O2: res at 0x94/0xD4: c8/00 [ 75.100000] Yenta O2: enabling read prefetch/write burst [ 75.228000] Yenta: ISA IRQ mask 0x0898, PCI irq 9 [ 75.228000] Socket status: 30000006 [ 75.228000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 75.228000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 75.228000] cs: IO port probe 0x2000-0x2fff: clean. [ 75.228000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [ 75.228000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff [ 75.228000] Yenta: CardBus bridge found at 0000:02:04.1 [103c:0021] [ 75.248000] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 75.248000] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 75.356000] Yenta: ISA IRQ mask 0x0898, PCI irq 9 [ 75.356000] Socket status: 30000006 [ 75.356000] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 75.356000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 75.356000] cs: IO port probe 0x2000-0x2fff: clean. [ 75.356000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [ 75.356000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff [ 75.448000] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 75.856000] irda_init() [ 75.856000] NET: Registered protocol family 23 [ 76.244000] Synaptics Touchpad, model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0 [ 76.284000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 76.288000] parport_pc 00:09: reported by Plug and Play ACPI [ 76.288000] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] [ 76.348000] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 76.416000] cs: IO port probe 0x100-0x3af: clean. [ 76.416000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 76.416000] cs: IO port probe 0x820-0x8ff: clean. [ 76.416000] cs: IO port probe 0xc00-0xcf7: clean. [ 76.420000] cs: IO port probe 0xa00-0xaff: clean. [ 76.444000] cs: IO port probe 0x100-0x3af: clean. [ 76.444000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 76.444000] cs: IO port probe 0x820-0x8ff: clean. [ 76.444000] cs: IO port probe 0xc00-0xcf7: clean. [ 76.448000] cs: IO port probe 0xa00-0xaff: clean. [ 78.248000] lp0: using parport0 (interrupt-driven). [ 78.316000] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k [ 78.968000] EXT3 FS on sda6, internal journal [ 81.516000] ACPI: Battery Slot [BAT1] (battery present) [ 81.624000] input: Power Button (FF) as /class/input/input4 [ 81.624000] ACPI: Power Button (FF) [PWRF] [ 81.664000] input: Lid Switch as /class/input/input5 [ 81.664000] ACPI: Lid Switch [LID] [ 81.684000] input: Power Button (CM) as /class/input/input6 [ 81.684000] ACPI: Power Button (CM) [PWRB] [ 81.696000] input: Sleep Button (CM) as /class/input/input7 [ 81.696000] ACPI: Sleep Button (CM) [SLPB] [ 82.056000] No dock devices found. [ 82.180000] ACPI: Video Device [GRFX] (multi-head: yes rom: no post: no) [ 82.212000] ACPI: AC Adapter [ACAD] (on-line) [ 82.620000] cpufreq: change failed with new_state 2 and result 0 [ 82.620000] cpufreq: change failed with new_state 2 and result 0 [ 86.048000] ppdev: user-space parallel port driver [ 86.504000] audit(1194055971.968:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4858 profile="/usr/sbin/cupsd" [ 86.620000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 86.620000] apm: overridden by ACPI. [ 88.636000] Failure registering capabilities with primary security module. [ 89.544000] Bluetooth: Core ver 2.11 [ 89.544000] NET: Registered protocol family 31 [ 89.544000] Bluetooth: HCI device and connection manager initialized [ 89.544000] Bluetooth: HCI socket layer initialized [ 89.748000] Bluetooth: L2CAP ver 2.8 [ 89.748000] Bluetooth: L2CAP socket layer initialized [ 90.056000] Bluetooth: RFCOMM socket layer initialized [ 90.060000] Bluetooth: RFCOMM TTY layer initialized [ 90.060000] Bluetooth: RFCOMM ver 1.8 [ 94.924000] [drm] Initialized drm 1.1.0 20060810 [ 94.932000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 94.936000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 94.940000] [drm] Initialized i915 1.6.0 20060119 on minor 1 [ 116.424000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 118.740000] NET: Registered protocol family 17 [ 121.612000] NET: Registered protocol family 10 [ 121.612000] lo: Disabled Privacy Extensions [ 132.116000] eth0: no IPv6 routers present [ 1636.432000] usb 1-1: USB disconnect, address 2 [ 1638.536000] hub 1-0:1.0: over-current change on port 1 [ 1639.032000] usb 1-1: new low speed USB device using uhci_hcd and address 3 [ 1639.464000] usb 1-1: configuration #1 chosen from 1 choice [ 1639.492000] input: Chicony USB Wireless HID Receiver as /class/input/input8 [ 1639.492000] input: USB HID v1.11 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1 [ 1639.524000] hiddev96: USB HID v1.11 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1 [ 1646.284000] ACPI: EC: acpi_ec_wait timeout, status = 0, expect_event = 1 [ 1646.284000] ACPI: EC: read timeout, command = 128 [ 1646.284000] ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20070126] [ 1646.284000] ACPI Exception (dswexec-0462): AE_TIME, While resolving operands for [OpcodeName unavailable] [20070126] [ 1646.284000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (Node ddd61e58), AE_TIME [ 1646.284000] ACPI Exception (battery-0206): AE_TIME, Evaluating _BST [20070126] [46374.112000] usb 1-1: USB disconnect, address 3 [46377.428000] hub 1-0:1.0: over-current change on port 1 [46377.924000] usb 1-1: new low speed USB device using uhci_hcd and address 4 [46378.356000] usb 1-1: configuration #1 chosen from 1 choice [46378.384000] input: Chicony USB Wireless HID Receiver as /class/input/input9 [46378.384000] input: USB HID v1.11 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1 [46378.416000] hiddev96: USB HID v1.11 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1 2ª parte - placa desligada [ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f6f0000 (usable) [ 0.000000] BIOS-e820: 000000001f6f0000 - 000000001f6ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f6ff000 - 000000001f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001f700000 - 000000001f780000 (usable) [ 0.000000] BIOS-e820: 000000001f780000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 503MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 128896) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 128896 [ 0.000000] HighMem 128896 -> 128896 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 128896 [ 0.000000] On node 0 totalpages: 128896 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 975 pages used for memmap [ 0.000000] Normal zone: 123825 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6190 checksum 0 [ 0.000000] ACPI: RSDP 000F6190, 0014 (r0 HP-MCD) [ 0.000000] ACPI: RSDT 1F6F9ED5, 0028 (r1 HP-MCD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 1F6FEF8C, 0074 (r1 HP-MCD GF DSDT 6040000 PTL 1) [ 0.000000] ACPI: DSDT 1F6F9EFD, 508F (r1 HP-MCD GF DSDT 6040000 MSFT 100000D) [ 0.000000] ACPI: FACS 1F6FFFC0, 0040 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000) [ 0.000000] Built 1 zonelists. Total pages: 127889 [ 0.000000] Kernel command line: root=UUID=0c27cd1f-4fb2-4a27-87e0-24ed11a1ff02 ro quiet splash locale=pt_PT [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffd000 (013fd000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 863.810 MHz processor. [ 36.937618] Console: colour VGA+ 80x25 [ 36.938114] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 36.938738] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 36.972740] Memory: 499208k/515584k available (2015k kernel code, 15656k reserved, 916k data, 364k init, 0k highmem) [ 36.972765] virtual kernel memory layout: [ 36.972767] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 36.972771] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 36.972775] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) [ 36.972778] lowmem : 0xc0000000 - 0xdf780000 ( 503 MB) [ 36.972781] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 36.972785] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 36.972788] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 36.972796] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 36.972878] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 37.052881] Calibrating delay using timer specific routine.. 1729.08 BogoMIPS (lpj=3458173) [ 37.052937] Security Framework v1.0.0 initialized [ 37.052957] SELinux: Disabled at boot. [ 37.052993] Mount-cache hash table entries: 512 [ 37.053249] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 37.053272] CPU: L1 I cache: 16K, L1 D cache: 16K [ 37.053279] CPU: L2 cache: 512K [ 37.053285] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 37.053305] Compat vDSO mapped to ffffe000. [ 37.053327] Checking 'hlt' instruction... OK. [ 37.069030] SMP alternatives: switching to UP code [ 37.069319] Freeing SMP alternatives: 11k freed [ 37.069840] Early unpacking initramfs... done [ 37.803440] ACPI: Core revision 20070126 [ 37.803630] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 37.807672] ACPI: setting ELCR to 0200 (from 0620) [ 37.816650] CPU0: Intel(R) Pentium(R) III Mobile CPU 866MHz stepping 01 [ 37.816665] SMP motherboard not detected. [ 37.816671] Local APIC not detected. Using dummy APIC emulation. [ 37.816774] Brought up 1 CPUs [ 37.817079] Booting paravirtualized kernel on bare hardware [ 37.817211] Time: 2:11:26 Date: 10/03/107 [ 37.817273] NET: Registered protocol family 16 [ 37.817516] EISA bus registered [ 37.817543] ACPI: bus type pci registered [ 37.818933] PCI: PCI BIOS revision 2.10 entry at 0xfd98a, last bus=2 [ 37.818939] PCI: Using configuration type 1 [ 37.818943] Setting up standard PCI resources [ 37.838833] ACPI: EC: Look up EC in DSDT [ 37.844053] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 37.846470] ACPI: Interpreter enabled [ 37.846480] ACPI: (supports S0 S1 S3 S4 S5) [ 37.846519] ACPI: Using PIC for interrupt routing [ 37.857628] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 37.857720] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 37.857744] PCI: Probing PCI hardware (bus 00) [ 37.858168] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 37.858177] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 37.858511] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 37.858578] PCI: Transparent bridge - 0000:00:1e.0 [ 37.858763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 37.858886] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 37.864532] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 37.864838] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 37.865069] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 37.865301] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 37.865532] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 37.865738] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 37.865945] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 37.866150] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 37.866356] Linux Plug and Play Support v0.97 (c) Adam Belay [ 37.866382] pnp: PnP ACPI init [ 37.866402] ACPI: bus type pnp registered [ 37.874153] pnp: PnP ACPI: found 11 devices [ 37.874159] ACPI: ACPI bus type pnp unregistered [ 37.874168] PnPBIOS: Disabled by ACPI PNP [ 37.874277] PCI: Using ACPI for IRQ routing [ 37.874285] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 37.878182] NET: Registered protocol family 8 [ 37.878188] NET: Registered protocol family 20 [ 37.878345] pnp: 00:01: ioport range 0x7b0-0x7bb has been reserved [ 37.878353] pnp: 00:01: ioport range 0x7c0-0x7df has been reserved [ 37.878360] pnp: 00:01: ioport range 0xbb0-0xbbb has been reserved [ 37.878367] pnp: 00:01: ioport range 0xbc0-0xbdf has been reserved [ 37.878374] pnp: 00:01: ioport range 0xfb0-0xfbb has been reserved [ 37.878381] pnp: 00:01: ioport range 0xfc0-0xfdf has been reserved [ 37.878388] pnp: 00:01: ioport range 0x13b0-0x13bb has been reserved [ 37.878395] pnp: 00:01: ioport range 0x13c0-0x13df has been reserved [ 37.878410] pnp: 00:05: ioport range 0x580-0x587 has been reserved [ 37.878418] pnp: 00:05: iomem range 0xfebffc00-0xfebfffff has been reserved [ 37.878426] pnp: 00:05: iomem range 0xfff80000-0xffffffff could not be reserved [ 37.880598] Time: tsc clocksource has been installed. [ 37.909132] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 37.909139] IO window: 00002800-000028ff [ 37.909146] IO window: 00002c00-00002cff [ 37.909153] PREFETCH window: 30000000-33ffffff [ 37.909160] MEM window: 38000000-3bffffff [ 37.909167] PCI: Bus 7, cardbus bridge: 0000:02:04.1 [ 37.909172] IO window: 00001400-000014ff [ 37.909179] IO window: 00001c00-00001cff [ 37.909186] PREFETCH window: 34000000-37ffffff [ 37.909193] MEM window: 3c000000-3fffffff [ 37.909200] PCI: Bridge: 0000:00:1e.0 [ 37.909205] IO window: 2000-2fff [ 37.909213] MEM window: e0200000-e02fffff [ 37.909221] PREFETCH window: 30000000-37ffffff [ 37.909238] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 37.909256] PCI: Enabling device 0000:02:04.0 (0081 -> 0083) [ 37.909623] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 [ 37.909630] PCI: setting IRQ 9 as level-triggered [ 37.909636] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 37.909649] PCI: Setting latency timer of device 0000:02:04.0 to 64 [ 37.909665] PCI: Enabling device 0000:02:04.1 (0081 -> 0083) [ 37.909978] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 37.909985] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 37.909998] PCI: Setting latency timer of device 0000:02:04.1 to 64 [ 37.910025] NET: Registered protocol family 2 [ 37.948655] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 37.948754] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 37.949278] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 37.949706] TCP: Hash tables configured (established 16384 bind 16384) [ 37.949714] TCP reno registered [ 37.960922] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 [ 38.606489] it is [ 39.361670] Freeing initrd memory: 7340k freed [ 39.362528] audit: initializing netlink socket (disabled) [ 39.362562] audit(1194055886.908:1): initialized [ 39.367870] VFS: Disk quotas dquot_6.5.1 [ 39.368078] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 39.368340] io scheduler noop registered [ 39.368346] io scheduler anticipatory registered [ 39.368352] io scheduler deadline registered [ 39.368397] io scheduler cfq registered (default) [ 39.368426] Boot video device is 0000:00:02.0 [ 39.368814] isapnp: Scanning for PnP cards... [ 39.722815] isapnp: No Plug & Play device found [ 39.784762] Real Time Clock Driver v1.12ac [ 39.784960] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 39.785310] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 39.787544] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 39.788044] input: Macintosh mouse button emulation as /class/input/input0 [ 39.788219] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 39.792459] i8042.c: Detected active multiplexing controller, rev 1.1. [ 39.795061] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 39.795074] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 39.795081] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 39.795087] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 39.795094] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 39.795549] mice: PS/2 mouse device common for all mice [ 39.795959] EISA: Probing bus 0 at eisa.0 [ 39.795979] Cannot allocate resource for EISA slot 1 [ 39.795987] Cannot allocate resource for EISA slot 2 [ 39.796022] EISA: Detected 0 cards. [ 39.796268] TCP cubic registered [ 39.796309] NET: Registered protocol family 1 [ 39.796373] Using IPI No-Shortcut mode [ 39.796749] Magic number: 15:80:156 [ 39.797513] Freeing unused kernel memory: 364k freed [ 40.270872] input: AT Translated Set 2 keyboard as /class/input/input1 [ 40.271225] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 40.467783] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 40.667767] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 40.867683] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 40.867700] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 41.067579] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 41.267456] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 41.390009] AppArmor: AppArmor initialized<5>audit(1194055889.408:2): type=1505 info="AppArmor initialized" pid=1185 [ 41.500964] fuse init (API version 7.8) [ 41.514490] Failure registering capabilities with primary security module. [ 41.634993] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 51.753769] usbcore: registered new interface driver usbfs [ 51.753820] usbcore: registered new interface driver hub [ 51.753875] usbcore: registered new device driver usb [ 51.756902] USB Universal Host Controller Interface driver v3.0 [ 51.757037] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 51.757061] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 51.757069] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 51.757337] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 51.757370] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001800 [ 51.757624] usb usb1: configuration #1 chosen from 1 choice [ 51.757685] hub 1-0:1.0: USB hub found [ 51.757698] hub 1-0:1.0: 2 ports detected [ 51.859244] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 [ 51.859254] PCI: setting IRQ 5 as level-triggered [ 51.859260] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 51.859282] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 51.859290] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 51.859342] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 51.859379] uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001820 [ 51.859603] usb usb2: configuration #1 chosen from 1 choice [ 51.859665] hub 2-0:1.0: USB hub found [ 51.859681] hub 2-0:1.0: 2 ports detected [ 51.963151] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 51.963162] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 51.963184] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 51.963192] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 51.963254] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 51.963291] uhci_hcd 0000:00:1d.2: irq 5, io base 0x00001840 [ 51.963508] usb usb3: configuration #1 chosen from 1 choice [ 51.963569] hub 3-0:1.0: USB hub found [ 51.963585] hub 3-0:1.0: 2 ports detected [ 52.092834] SCSI subsystem initialized [ 52.114031] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 52.114328] libata version 2.21 loaded. [ 52.127934] ata_piix 0000:00:1f.1: version 2.11 [ 52.127958] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 52.127975] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 52.128039] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 52.128283] scsi0 : ata_piix [ 52.128371] scsi1 : ata_piix [ 52.128610] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14 [ 52.128619] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15 [ 52.290801] ata1.00: ATA-6: FUJITSU MHT2040AT, 0022, max UDMA/100 [ 52.290812] ata1.00: 78140160 sectors, multi 16: LBA [ 52.306771] ata1.00: configured for UDMA/100 [ 52.547262] usb 1-1: configuration #1 chosen from 1 choice [ 52.626418] ata2.00: ATAPI: CD-224E, 1.7A, max UDMA/33 [ 52.798373] ata2.00: configured for UDMA/33 [ 52.806186] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2040A 0022 PQ: 0 ANSI: 5 [ 52.807177] scsi 1:0:0:0: CD-ROM TEAC CD-224E 1.7A PQ: 0 ANSI: 5 [ 52.974334] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 52.974343] e100: Copyright(c) 1999-2006 Intel Corporation [ 52.974850] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 [ 52.974858] PCI: setting IRQ 10 as level-triggered [ 52.974865] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 52.998137] e100: eth0: e100_probe: addr 0xe0200000, irq 10, MAC addr 00:02:3F:34:A6:5D [ 53.376950] Floppy drive(s): fd0 is 1.44M [ 53.399736] FDC 0 is a National Semiconductor PC87306 [ 54.191524] usbcore: registered new interface driver hiddev [ 54.217553] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) [ 54.221539] sd 0:0:0:0: [sda] Write Protect is off [ 54.221546] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 54.229532] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 54.237528] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) [ 54.239586] input: Chicony USB Wireless HID Receiver as /class/input/input2 [ 54.239631] input: USB HID v1.11 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1 [ 54.239680] sd 0:0:0:0: [sda] Write Protect is off [ 54.239687] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 54.241518] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 54.241529] sda:<6>hiddev96: USB HID v1.11 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1 [ 54.271109] usbcore: registered new interface driver usbhid [ 54.271118] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 54.281098] sda2 < sda5 sda6 > [ 54.282301] sd 0:0:0:0: [sda] Attached SCSI disk [ 54.292705] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 54.292752] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 54.374700] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 54.374713] Uniform CD-ROM driver Revision: 3.20 [ 54.374827] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 56.016246] Attempting manual resume [ 56.016255] swsusp: Resume From Partition 8:5 [ 56.016259] PM: Checking swsusp image. [ 56.112700] PM: Resume from disk failed. [ 56.848510] kjournald starting. Commit interval 5 seconds [ 56.848536] EXT3-fs: mounted filesystem with ordered data mode. [ 64.012000] Marking TSC unstable due to: possible TSC halt in C2. [ 64.016000] Time: acpi_pm clocksource has been installed. [ 64.436000] Clocksource tsc unstable (delta = -348366671 ns) [ 72.720000] intel_rng: FWH not detected [ 72.768000] iTCO_vendor_support: vendor-support=0 [ 72.768000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 72.768000] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060) [ 72.768000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 72.836000] Linux agpgart interface v0.102 (c) Dave Jones [ 72.848000] agpgart: Detected an Intel 830M Chipset. [ 72.848000] agpgart: Detected 8060K stolen memory. [ 72.860000] agpgart: AGP aperture is 128M @ 0xe8000000 [ 72.888000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 72.896000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 75.048000] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 75.060000] usbcore: registered new interface driver xpad [ 75.060000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6 [ 75.100000] Yenta: CardBus bridge found at 0000:02:04.0 [103c:0021] [ 75.100000] Yenta O2: res at 0x94/0xD4: c8/00 [ 75.100000] Yenta O2: enabling read prefetch/write burst [ 75.228000] Yenta: ISA IRQ mask 0x0898, PCI irq 9 [ 75.228000] Socket status: 30000006 [ 75.228000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 75.228000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 75.228000] cs: IO port probe 0x2000-0x2fff: clean. [ 75.228000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [ 75.228000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff [ 75.228000] Yenta: CardBus bridge found at 0000:02:04.1 [103c:0021] [ 75.248000] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 75.248000] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 75.356000] Yenta: ISA IRQ mask 0x0898, PCI irq 9 [ 75.356000] Socket status: 30000006 [ 75.356000] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 75.356000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 75.356000] cs: IO port probe 0x2000-0x2fff: clean. [ 75.356000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [ 75.356000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff [ 75.448000] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 75.856000] irda_init() [ 75.856000] NET: Registered protocol family 23 [ 76.244000] Synaptics Touchpad, model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0 [ 76.284000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 76.288000] parport_pc 00:09: reported by Plug and Play ACPI [ 76.288000] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] [ 76.348000] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 76.416000] cs: IO port probe 0x100-0x3af: clean. [ 76.416000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 76.416000] cs: IO port probe 0x820-0x8ff: clean. [ 76.416000] cs: IO port probe 0xc00-0xcf7: clean. [ 76.420000] cs: IO port probe 0xa00-0xaff: clean. [ 76.444000] cs: IO port probe 0x100-0x3af: clean. [ 76.444000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 76.444000] cs: IO port probe 0x820-0x8ff: clean. [ 76.444000] cs: IO port probe 0xc00-0xcf7: clean. [ 76.448000] cs: IO port probe 0xa00-0xaff: clean. [ 78.248000] lp0: using parport0 (interrupt-driven). [ 78.316000] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k [ 78.968000] EXT3 FS on sda6, internal journal [ 81.516000] ACPI: Battery Slot [BAT1] (battery present) [ 81.624000] input: Power Button (FF) as /class/input/input4 [ 81.624000] ACPI: Power Button (FF) [PWRF] [ 81.664000] input: Lid Switch as /class/input/input5 [ 81.664000] ACPI: Lid Switch [LID] [ 81.684000] input: Power Button (CM) as /class/input/input6 [ 81.684000] ACPI: Power Button (CM) [PWRB] [ 81.696000] input: Sleep Button (CM) as /class/input/input7 [ 81.696000] ACPI: Sleep Button (CM) [SLPB] [ 82.056000] No dock devices found. [ 82.180000] ACPI: Video Device [GRFX] (multi-head: yes rom: no post: no) [ 82.212000] ACPI: AC Adapter [ACAD] (on-line) [ 82.620000] cpufreq: change failed with new_state 2 and result 0 [ 82.620000] cpufreq: change failed with new_state 2 and result 0 [ 86.048000] ppdev: user-space parallel port driver [ 86.504000] audit(1194055971.968:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4858 profile="/usr/sbin/cupsd" [ 86.620000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 86.620000] apm: overridden by ACPI. [ 88.636000] Failure registering capabilities with primary security module. [ 89.544000] Bluetooth: Core ver 2.11 [ 89.544000] NET: Registered protocol family 31 [ 89.544000] Bluetooth: HCI device and connection manager initialized [ 89.544000] Bluetooth: HCI socket layer initialized [ 89.748000] Bluetooth: L2CAP ver 2.8 [ 89.748000] Bluetooth: L2CAP socket layer initialized [ 90.056000] Bluetooth: RFCOMM socket layer initialized [ 90.060000] Bluetooth: RFCOMM TTY layer initialized [ 90.060000] Bluetooth: RFCOMM ver 1.8 [ 94.924000] [drm] Initialized drm 1.1.0 20060810 [ 94.932000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 94.936000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 94.940000] [drm] Initialized i915 1.6.0 20060119 on minor 1 [ 116.424000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 118.740000] NET: Registered protocol family 17 [ 121.612000] NET: Registered protocol family 10 [ 121.612000] lo: Disabled Privacy Extensions [ 132.116000] eth0: no IPv6 routers present [ 1636.432000] usb 1-1: USB disconnect, address 2 [ 1638.536000] hub 1-0:1.0: over-current change on port 1 [ 1639.032000] usb 1-1: new low speed USB device using uhci_hcd and address 3 [ 1639.464000] usb 1-1: configuration #1 chosen from 1 choice [ 1639.492000] input: Chicony USB Wireless HID Receiver as /class/input/input8 [ 1639.492000] input: USB HID v1.11 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1 [ 1639.524000] hiddev96: USB HID v1.11 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1 [ 1646.284000] ACPI: EC: acpi_ec_wait timeout, status = 0, expect_event = 1 [ 1646.284000] ACPI: EC: read timeout, command = 128 [ 1646.284000] ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20070126] [ 1646.284000] ACPI Exception (dswexec-0462): AE_TIME, While resolving operands for [OpcodeName unavailable] [20070126] [ 1646.284000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (Node ddd61e58), AE_TIME [ 1646.284000] ACPI Exception (battery-0206): AE_TIME, Evaluating _BST [20070126] [46374.112000] usb 1-1: USB disconnect, address 3 [46377.428000] hub 1-0:1.0: over-current change on port 1 [46377.924000] usb 1-1: new low speed USB device using uhci_hcd and address 4 [46378.356000] usb 1-1: configuration #1 chosen from 1 choice [46378.384000] input: Chicony USB Wireless HID Receiver as /class/input/input9 [46378.384000] input: USB HID v1.11 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1 [46378.416000] hiddev96: USB HID v1.11 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-1