(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 0.1.0
        ABI class: X.Org Video Driver, version 1.2
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.2
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "ATI Radeon X1950 GT" (Chipset = 0x7288)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe190)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xe1000000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.1.0
        ABI class: X.Org Video Driver, version 1.2
(EE) fglrx(0): unknown type(0xffffffff)=0xff
(II) fglrx(0): EAX=0x00004f00, EBX=0x00000000, ECX=0x00000000, EDX=0x00000000
(II) fglrx(0): ESP=0x00000ffa, EBP=0x00000000, ESI=0x00000000, EDI=0x00002000
(II) fglrx(0): CS=0xc000, SS=0x0100, DS=0x0040, ES=0x0000, FS=0x0000, GS=0x0000
(II) fglrx(0): EIP=0x00000468, EFLAGS=0x00003200
(II) fglrx(0): code at 0x000c0468:
 e8 95 07 e8 aa 12 74 10 2e 3a 26 36 02 75 24 3c
 0e 75 20 e8 57 00 eb 1d 2e 3a 26 36 02 75 05 e8
(II) stack at 0x00001ffa:
 00 06 00 00 00 32
(II) fglrx(0): VESA BIOS not detected
(WW) fglrx(0): GetVBEMode failed
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
        compiled for 7.1.0, module version = 8.40.4
        ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(WW) fglrx(0): Only one display is connnected,so single mode is enabled

Backtrace:
0: X(xf86SigHandler+0x85) [0x80ceca5]
1: /usr/lib/xorg/modules/drivers//fglrx_drv.so(swlDalHelperSetSafeMode+0x50) [0xb79499f0]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(swlDalHelperPreInit+0x589) [0xb794b9f9]
3: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxPreInit+0x787) [0xb791da37]
4: X(InitOutput+0x988) [0x80a2898]

Fatal server error:
Caught signal 11.  Server aborting