[ 0.000000] Linux version 2.6.20-16-generic (root@king) (gcc version 4.1.2 (U buntu 4.1.2-0ubuntu4)) #2 SMP Sun Sep 23 18:31:23 UTC 2007 (Ubuntu 2.6.20-16.32- generic) [ 0.000000] Command line: root=UUID=9df25e6c-7f9a-4748-ad17-b35e9e089513 ro q uiet splash frontend noapic [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 262128) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x0000 0000000f7b90 [ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x 000000003fff3040 [ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x 000000003fff30c0 [ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x 000000003fff9580 [ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x 000000003fff97c0 [ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x 000000003fff94c0 [ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x 0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003fff0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 262128) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 262128 [ 0.000000] On node 0 totalpages: 262031 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1101 pages reserved [ 0.000000] DMA zone: 2842 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3527 pages used for memmap [ 0.000000] DMA32 zone: 254505 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option. [ 0.000000] Using ACPI for processor (LAPIC) configuration information [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTAB LE: APIC at: 0xFEE00000 [ 0.000000] I/O APIC #2 at 0xFEC00000. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Processors: 2 [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000 [ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a000 0000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 257347 [ 0.000000] Kernel command line: root=UUID=9df25e6c-7f9a-4748-ad17-b35e9e0895 13 ro quiet splash frontend noapic [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 22.489752] Console: colour VGA+ 80x25 [ 22.490346] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 22.491279] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 22.491382] Checking aperture... [ 22.491385] CPU 0: aperture @ 2d40000000 size 32 MB [ 22.491387] Aperture too small (32 MB) [ 22.496126] No AGP bridge found [ 22.507046] Memory: 1021088k/1048512k available (2218k kernel code, 27036k re served, 1162k data, 304k init) [ 22.585685] Calibrating delay using timer specific routine.. 4023.10 BogoMIPS (lpj=8046215) [ 22.585741] Security Framework v1.0.0 initialized [ 22.585749] SELinux: Disabled at boot. [ 22.585773] Mount-cache hash table entries: 256 [ 22.585915] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 22.585917] CPU: L2 Cache: 512K (64 bytes/line) [ 22.585920] CPU 0/0 -> Node 0 [ 22.585922] CPU: Physical Processor ID: 0 [ 22.585923] CPU: Processor Core ID: 0 [ 22.585947] SMP alternatives: switching to UP code [ 22.586218] Early unpacking initramfs... done [ 22.872195] ACPI: Core revision 20060707 [ 22.874516] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 22.877418] ACPI: setting ELCR to 0200 (from 0c28) [ 22.878367] Using local APIC timer interrupts. [ 22.928077] result 12564474 [ 22.928078] Detected 12.564 MHz APIC timer. [ 22.929678] SMP alternatives: switching to SMP code [ 22.929810] Booting processor 1/2 APIC 0x1 [ 22.939866] Initializing CPU#1 [ 22.941021] spurious 8259A interrupt: IRQ7. [ 23.017197] Calibrating delay using timer specific routine.. 4026.31 BogoMIPS (lpj=8052639) [ 23.017203] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 23.017205] CPU: L2 Cache: 512K (64 bytes/line) [ 23.017208] CPU 1/1 -> Node 0 [ 23.017209] CPU: Physical Processor ID: 0 [ 23.017211] CPU: Processor Core ID: 1 [ 23.017290] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 23.021203] CPU 1: Syncing TSC to CPU 0. [ 23.021500] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 52 5 cycles) [ 23.021510] Brought up 2 CPUs [ 23.021518] Disabling vsyscall due to use of PM timer [ 23.021521] time.c: Using 3.579545 MHz WALL PM GTOD PM timer. [ 23.021523] time.c: Detected 2010.313 MHz processor. [ 23.862225] migration_cost=209 [ 23.862556] Time: 5:25:05 Date: 10/07/107 [ 23.862596] NET: Registered protocol family 16 [ 23.862677] ACPI: bus type pci registered [ 23.862683] PCI: Using configuration type 1 [ 23.869903] ACPI: Interpreter enabled [ 23.869906] ACPI: Using PIC for interrupt routing [ 23.870523] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 23.870527] PCI: Probing PCI hardware (bus 00) [ 23.873020] PCI: Transparent bridge - 0000:00:09.0 [ 23.873229] Boot video device is 0000:05:00.0 [ 23.873286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 23.957818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 23.960118] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) * 0, disabled. [ 23.960484] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) * 0, disabled. [ 23.960866] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 23.961231] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) * 0, disabled. [ 23.961596] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) * 0, disabled. [ 23.961960] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 23.962322] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) * 0, disabled. [ 23.962685] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 23.963049] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 23.963411] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) * 0, disabled. [ 23.963778] ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 23.964140] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 23.964502] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) * 0, disabled. [ 23.964894] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 23.965265] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 23.965638] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) * 0, disabled. [ 23.966048] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 23.966457] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 23.966859] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 23.967261] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 23.967573] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 23.967994] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 23.968411] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 23.968842] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 23.969262] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 23.969679] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 23.970094] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 23.970511] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 23.970927] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 23.971352] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 23.971779] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 23.972209] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 23.975387] Linux Plug and Play Support v0.97 (c) Adam Belay [ 23.975398] pnp: PnP ACPI init [ 23.982554] pnp: PnP ACPI: found 13 devices [ 23.982612] PCI: Using ACPI for IRQ routing [ 23.982616] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 23.982686] NET: Registered protocol family 8 [ 23.982688] NET: Registered protocol family 20 [ 23.983187] pnp: 00:01: ioport range 0x1000-0x107f could not be reserved [ 23.983190] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved [ 23.983193] pnp: 00:01: ioport range 0x1400-0x147f has been reserved [ 23.983196] pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved [ 23.983199] pnp: 00:01: ioport range 0x1800-0x187f has been reserved [ 23.983202] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved [ 23.983494] PCI: Bridge: 0000:00:09.0 [ 23.983497] IO window: a000-afff [ 23.983500] MEM window: fde00000-fdefffff [ 23.983503] PREFETCH window: fdf00000-fdffffff [ 23.983506] PCI: Bridge: 0000:00:0b.0 [ 23.983508] IO window: 9000-9fff [ 23.983510] MEM window: fdd00000-fddfffff [ 23.983513] PREFETCH window: fdc00000-fdcfffff [ 23.983515] PCI: Bridge: 0000:00:0c.0 [ 23.983517] IO window: 8000-8fff [ 23.983520] MEM window: fdb00000-fdbfffff [ 23.983523] PREFETCH window: fda00000-fdafffff [ 23.983525] PCI: Bridge: 0000:00:0d.0 [ 23.983527] IO window: 7000-7fff [ 23.983530] MEM window: fd900000-fd9fffff [ 23.983533] PREFETCH window: fd800000-fd8fffff [ 23.983538] PCI: Bridge: 0000:00:0e.0 [ 23.983540] IO window: 6000-6fff [ 23.983542] MEM window: fa000000-fcffffff [ 23.983545] PREFETCH window: d0000000-dfffffff [ 23.983553] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 23.983560] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 23.983565] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 23.983571] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 23.983576] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 23.983621] NET: Registered protocol family 2 [ 24.020717] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 24.020933] TCP established hash table entries: 131072 (order: 9, 2097152 byt es) [ 24.022239] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 24.022904] TCP: Hash tables configured (established 131072 bind 65536) [ 24.022908] TCP reno registered [ 24.032772] checking if image is initramfs... it is [ 24.598595] Freeing initrd memory: 6661k freed [ 24.603115] audit: initializing netlink socket (disabled) [ 24.603128] audit(1194413105.072:1): initialized [ 24.603308] VFS: Disk quotas dquot_6.5.1 [ 24.603329] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 24.603375] io scheduler noop registered [ 24.603377] io scheduler anticipatory registered [ 24.603379] io scheduler deadline registered [ 24.603393] io scheduler cfq registered (default) [ 24.620202] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 [ 24.620209] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 24.620215] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 [ 24.620221] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 24.620227] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 [ 24.620233] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 24.620239] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 [ 24.620245] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 24.620412] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 24.620429] assign_interrupt_mode Found MSI capability [ 24.620433] Allocate Port Service[0000:00:0b.0:pcie00] [ 24.620493] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 24.620509] assign_interrupt_mode Found MSI capability [ 24.620511] Allocate Port Service[0000:00:0c.0:pcie00] [ 24.620569] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 24.620585] assign_interrupt_mode Found MSI capability [ 24.620587] Allocate Port Service[0000:00:0d.0:pcie00] [ 24.620643] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 24.620658] assign_interrupt_mode Found MSI capability [ 24.620661] Allocate Port Service[0000:00:0e.0:pcie00] [ 24.645412] Real Time Clock Driver v1.12ac [ 24.645458] Linux agpgart interface v0.102 (c) Dave Jones [ 24.645461] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 24.645570] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 24.646096] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 24.646290] mice: PS/2 mouse device common for all mice [ 24.646862] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 bloc ksize [ 24.647018] input: Macintosh mouse button emulation as /class/input/input0 [ 24.647053] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 24.647057] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 24.647210] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 24.647213] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 24.647519] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 24.647523] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 24.647621] TCP cubic registered [ 24.647631] NET: Registered protocol family 1 [ 24.647700] ACPI: (supports S0 S3 S4 S5) [ 24.647751] Magic number: 15:457:415 [ 24.647877] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 24.647963] Freeing unused kernel memory: 304k freed [ 24.664601] input: AT Translated Set 2 keyboard as /class/input/input1 [ 25.814263] Capability LSM initialized [ 25.846544] ACPI: Fan [FAN] (on) [ 25.851502] ACPI: Thermal Zone [THRM] (34 C) [ 26.302792] usbcore: registered new interface driver usbfs [ 26.302814] usbcore: registered new interface driver hub [ 26.335946] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 [ 26.335967] NFORCE-CK804: chipset revision 243 [ 26.335970] NFORCE-CK804: not 100% native mode: will probe irqs later [ 26.335975] NFORCE-CK804: 0000:00:06.0 (rev f3) UDMA133 controller [ 26.335984] ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DM A [ 26.335994] ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DM A [ 26.336002] Probing IDE interface ide0... [ 26.345046] usbcore: registered new device driver usb [ 26.345094] Floppy drive(s): fd0 is 1.44M [ 26.346346] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0 .59. [ 26.347309] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Dr iver [ 26.372100] FDC 0 is a post-1991 82077 [ 26.850579] hdb: Maxtor 6Y120P0, ATA DISK drive [ 26.906753] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 26.922314] Probing IDE interface ide1... [ 27.661970] hdc: LG CD-RW CED-8120B, ATAPI CD/DVD-ROM drive [ 27.998531] ide1 at 0x170-0x177,0x376 on irq 15 [ 27.999875] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11 [ 27.999878] PCI: setting IRQ 11 as level-triggered [ 27.999881] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 11 (lev el, low) -> IRQ 11 [ 27.999887] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 27.999895] forcedeth: using HIGHDMA [ 28.521485] eth0: forcedeth.c: subsystem: 01019:1b13 bound to 0000:00:0a.0 [ 28.521991] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10 [ 28.521996] PCI: setting IRQ 10 as level-triggered [ 28.521999] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 10 (lev el, low) -> IRQ 10 [ 28.522014] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 28.522018] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 28.522263] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus numbe r 1 [ 28.522294] ehci_hcd 0000:00:02.1: debug port 1 [ 28.522298] PCI: cache line size of 64 is not supported by device 0000:00:02. 1 [ 28.522308] ehci_hcd 0000:00:02.1: irq 10, io mem 0xfe02e000 [ 28.522313] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 28.523441] usb usb1: configuration #1 chosen from 1 choice [ 28.523620] hub 1-0:1.0: USB hub found [ 28.523629] hub 1-0:1.0: 10 ports detected [ 28.527430] SCSI subsystem initialized [ 28.532875] libata version 2.20 loaded. [ 28.632749] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 5 [ 28.632755] PCI: setting IRQ 5 as level-triggered [ 28.632758] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 5 (leve l, low) -> IRQ 5 [ 28.632776] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 28.632780] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 28.632812] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus numbe r 2 [ 28.632830] ohci_hcd 0000:00:02.0: irq 5, io mem 0xfe02f000 [ 28.691248] usb usb2: configuration #1 chosen from 1 choice [ 28.691275] hub 2-0:1.0: USB hub found [ 28.691285] hub 2-0:1.0: 10 ports detected [ 28.797137] sata_nv 0000:00:07.0: version 3.3 [ 28.797552] ACPI: PCI Interrupt Link [LSID] enabled at IRQ 10 [ 28.797555] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LSID] -> GSI 10 (lev el, low) -> IRQ 10 [ 28.797567] sata_nv 0000:00:07.0: Using ADMA mode [ 28.797586] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 28.797684] ata1: SATA max UDMA/133 cmd 0xffffc2000001e480 ctl 0xffffc2000001 e4a0 bmdma 0x000000000001d400 irq 10 [ 28.797731] ata2: SATA max UDMA/133 cmd 0xffffc2000001e580 ctl 0xffffc2000001 e5a0 bmdma 0x000000000001d408 irq 10 [ 28.797740] scsi0 : sata_nv [ 29.052858] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 29.187051] usb 1-3: configuration #1 chosen from 1 choice [ 29.268711] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 29.318549] ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625 142448 [ 29.318554] ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 [ 29.318557] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 29.385141] ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625 142448 [ 29.385146] ata1.00: configured for UDMA/133 [ 29.385149] ata1: EH pending after completion, repeating EH (cnt=4) [ 29.385162] scsi1 : sata_nv [ 29.492527] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 29.700368] ata2: SATA link down (SStatus 0 SControl 300) [ 29.700489] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ : 0 ANSI: 5 [ 29.700497] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFF F, hw segs 61 [ 29.701570] ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11 [ 29.701573] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LFID] -> GSI 11 (lev el, low) -> IRQ 11 [ 29.701584] sata_nv 0000:00:08.0: Using ADMA mode [ 29.701601] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 29.701666] ata3: SATA max UDMA/133 cmd 0xffffc20000020480 ctl 0xffffc2000002 04a0 bmdma 0x000000000001c000 irq 11 [ 29.701713] ata4: SATA max UDMA/133 cmd 0xffffc20000020580 ctl 0xffffc2000002 05a0 bmdma 0x000000000001c008 irq 11 [ 29.701724] scsi2 : sata_nv [ 29.714446] usb 2-2: configuration #1 chosen from 1 choice [ 29.718123] usbcore: registered new interface driver libusual [ 29.721334] Initializing USB Mass Storage driver... [ 29.721421] scsi4 : SCSI emulation for USB Mass Storage devices [ 29.721496] usb-storage: device found at 3 [ 29.721488] usbcore: registered new interface driver usb-storage [ 29.721492] USB Mass Storage support registered. [ 29.721506] usb-storage: waiting for device to settle before scanning [ 30.016133] ata3: SATA link down (SStatus 0 SControl 300) [ 30.016148] scsi3 : sata_nv [ 30.327899] ata4: SATA link down (SStatus 0 SControl 300) [ 30.338894] hdb: max request size: 128KiB [ 30.339052] hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/ 63, UDMA(133) [ 30.339184] hdb: cache flushes supported [ 30.339221] hdb: hdb1 < hdb5<5>SCSI device sda: 625142448 512-byte hdwr sect ors (320073 MB) [ 30.353956] sda: Write Protect is off [ 30.353959] sda: Mode Sense: 00 3a 00 00 [ 30.353972] SCSI device sda: write cache: enabled, read cache: enabled, doesn 't support DPO or FUA [ 30.354025] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) [ 30.354033] sda: Write Protect is off [ 30.354035] sda: Mode Sense: 00 3a 00 00 [ 30.354048] SCSI device sda: write cache: enabled, read cache: enabled, doesn 't support DPO or FUA [ 30.354053] sda:<6>usbcore: registered new interface driver hiddev [ 30.360682] hdb6<6>input: Logitech USB-PS/2 Optical Mouse as /class/input/in put2 [ 30.361304] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on u sb-0000:00:02.0-2 [ 30.361319] usbcore: registered new interface driver usbhid [ 30.361322] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 30.374083] unknown partition table [ 30.374275] sd 0:0:0:0: Attached scsi disk sda [ 30.377536] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 30.378907] hdb7 > [ 30.381354] hdc: ATAPI 32X CD-ROM CD-R/RW drive, 8192kB Cache, DMA [ 30.381363] Uniform CD-ROM driver Revision: 3.20 [ 30.966123] Attempting manual resume [ 30.966127] swsusp: Resume From Partition 3:71 [ 30.966129] PM: Checking swsusp image. [ 30.979516] PM: Resume from disk failed. [ 30.994475] EXT3-fs: INFO: recovery required on readonly filesystem. [ 30.994479] EXT3-fs: write access will be enabled during recovery. [ 34.720471] usb-storage: device scan complete [ 34.723343] scsi 4:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 2.17 PQ : 0 ANSI: 2 [ 34.731701] SCSI device sdb: 4001425 512-byte hdwr sectors (2049 MB) [ 34.737692] sdb: Write Protect is off [ 34.737695] sdb: Mode Sense: 03 00 00 00 [ 34.737696] sdb: assuming drive cache: write through [ 34.754682] SCSI device sdb: 4001425 512-byte hdwr sectors (2049 MB) [ 34.760673] sdb: Write Protect is off [ 34.760674] sdb: Mode Sense: 03 00 00 00 [ 34.760676] sdb: assuming drive cache: write through [ 34.760706] sdb: sdb1 [ 34.765243] sd 4:0:0:0: Attached scsi removable disk sdb [ 34.765278] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 37.104137] kjournald starting. Commit interval 5 seconds [ 37.104171] EXT3-fs: hdb6: orphan cleanup on readonly fs [ 37.104180] ext3_orphan_cleanup: deleting unreferenced inode 3080293 [ 37.231449] ext3_orphan_cleanup: deleting unreferenced inode 3031127 [ 37.245911] ext3_orphan_cleanup: deleting unreferenced inode 3031126 [ 37.252496] ext3_orphan_cleanup: deleting unreferenced inode 3031125 [ 37.252506] ext3_orphan_cleanup: deleting unreferenced inode 3031124 [ 37.252525] ext3_orphan_cleanup: deleting unreferenced inode 3031123 [ 37.252535] ext3_orphan_cleanup: deleting unreferenced inode 3031121 [ 37.252541] ext3_orphan_cleanup: deleting unreferenced inode 3031120 [ 37.252548] ext3_orphan_cleanup: deleting unreferenced inode 3031119 [ 37.252555] ext3_orphan_cleanup: deleting unreferenced inode 3031118 [ 37.291536] ext3_orphan_cleanup: deleting unreferenced inode 3031117 [ 37.363112] ext3_orphan_cleanup: deleting unreferenced inode 3031047 [ 37.370120] ext3_orphan_cleanup: deleting unreferenced inode 4800776 [ 37.370138] EXT3-fs: hdb6: 13 orphan inodes deleted [ 37.370140] EXT3-fs: recovery complete. [ 37.679812] EXT3-fs: mounted filesystem with ordered data mode. [ 66.537793] NET: Registered protocol family 17 [ 66.599876] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 66.662717] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 66.662758] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 66.669159] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 66.711076] parport: PnPBIOS parport detected. [ 66.711153] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE ,COMPAT,ECP,DMA] [ 66.729397] input: PC Speaker as /class/input/input3 [ 66.977882] nvidia: module license 'NVIDIA' taints kernel. [ 67.233271] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5 [ 67.233276] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNK3] -> GSI 5 (leve l, low) -> IRQ 5 [ 67.233285] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 67.233495] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9755 Mon Feb 26 23:16:31 PST 2007 [ 67.560903] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 3 [ 67.560908] PCI: setting IRQ 3 as level-triggered [ 67.560911] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LACI] -> GSI 3 (leve l, low) -> IRQ 3 [ 67.560944] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 67.879301] intel8x0_measure_ac97_clock: measured 54895 usecs [ 67.879303] intel8x0: clocking to 46914 [ 67.998157] lp0: using parport0 (interrupt-driven). [ 68.045904] Adding 1052216k swap on /dev/disk/by-uuid/66802bd6-95ef-46f5-8c24 -7ad89bd257db. Priority:-1 extents:1 across:1052216k [ 68.211418] EXT3 FS on hdb6, internal journal [ 78.759221] input: Power Button (FF) as /class/input/input4 [ 78.759246] ACPI: Power Button (FF) [PWRF] [ 78.759285] input: Power Button (CM) as /class/input/input5 [ 78.759302] ACPI: Power Button (CM) [PWRB] [ 78.796182] Using specific hotkey driver [ 78.839165] No dock devices found. [ 78.874938] ibm_acpi: ec object not found [ 79.016880] pcc_acpi: loading... [ 79.233125] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 380 0+ processors (version 2.00.00) [ 79.233233] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe [ 79.233238] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10 [ 79.233240] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 98.965858] NET: Registered protocol family 10 [ 98.965961] lo: Disabled Privacy Extensions [ 104.387318] eth0: no IPv6 routers present [ 311.282438] gaim[5521]: segfault at 00002b5a302e74b0 rip 00002b5a302e74b0 rsp 00007fff882426a8 error 14 [ 371.179749] eth0: no IPv6 routers present [ 461.027820] eth0: link down.