[trunkgroups]

[channels]
language=en
context=default
usecallerid=yes
hidecallerid=no
callerid=asreceived
cidsignalling=bell
cidstart=ring
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
overlapdial=no
callreturn=yes
; turned this off to address DTMF input issues on DID
; Sat Jul 28 00:57:09 EDT 2007
;echocancel=no
echocancel=yes
echotraining=no
;echocancelwhenbridged=no
;echotraining=yes
;relaxdtmf=no
; lets see if this helps under load...
relaxdtmf=yes
;http://www.asteriskdocs.org/modules/tinycontent/content/docbook/current/docs-html/x1695.html
rxgain=6.0
txgain=0.0
callgroup=1
pickupgroup=1
; immediate - Controls whether an initiated call is transferred to the "s"
; extension dial plan immediately or whether the call receives a
; connection signal and has to wait for timeouts.
immediate=no
adsi=no
;    prewink:     Pre-wink time (default 50ms)
;    preflash:    Pre-flash time (default 50ms)
;    wink:        Wink time (default 150ms)
;    flash:       Flash time (default 750ms)
;    start:       Start time (default 1500ms)
;    rxwink:      Receiver wink time (default 300ms)
rxwink=450
;    rxflash:     Receiver flashtime (default 1250ms)
;    debounce:    Debounce timing (default 600ms)

busydetect=yes
busycount=6
amaFlags=documentation
accountCode=zapata
callprogress=yes
progzone=us
signalling = em_w
group=1
channel => 1-24

; http://www.asteriskguru.com/tutorials/em.html
; http://www.voip-info.org/wiki/index.php?page=Asterisk+config+zapata.conf.sample

language=en
echocancel=yes
context=fax
signalling=fxo_ks
group=2
channel => 25-28