Linux version 2.6.22-ARCH (root@T-POWA-LX) (gcc version 4.2.1) #1 SMP PREEMPT Wed Sep 26 20:57:40 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f6f0000 (usable) BIOS-e820: 000000001f6f0000 - 000000001f6fb000 (ACPI data) BIOS-e820: 000000001f6fb000 - 000000001f700000 (ACPI NVS) BIOS-e820: 000000001f700000 - 000000001f780000 (usable) BIOS-e820: 000000001f780000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) 0MB HIGHMEM available. 503MB LOWMEM available. found SMP MP-table at 000f62d0 Entering add_active_range(0, 0, 128896) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 128896 HighMem 128896 -> 128896 early_node_map[1] active PFN ranges 0: 0 -> 128896 On node 0 totalpages: 128896 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 975 pages used for memmap Normal zone: 123825 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI present. ACPI: RSDP 000F6360, 0014 (r0 PTLTD ) ACPI: RSDT 1F6F73EC, 0034 (r1 PTLTD RSDT 60400D0 LTP 0) ACPI: FACP 1F6FAEE2, 0074 (r1 IBM NETVISTA 60400D0 PTL 1) ACPI: DSDT 1F6F7420, 3AC2 (r1 IBM Yelotail 60400D0 MSFT 100000E) ACPI: FACS 1F6FBFC0, 0040 ACPI: TCPA 1F6FAF56, 0032 (r1 IBM NETVISTA 60400D0 PTL 1) ACPI: APIC 1F6FAF88, 0050 (r1 PTLTD APIC 60400D0 LTP 0) ACPI: BOOT 1F6FAFD8, 0028 (r1 PTLTD $SBFTBL$ 60400D0 LTP 1) ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Built 1 zonelists. Total pages: 127889 Kernel command line: initrd=initrd.img rootdelay=5 BOOT_IMAGE=vmlinuz mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 2658.255 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 478124k/515584k available (2391k kernel code, 36704k reserved, 780k data, 304k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff82000 - 0xfffff000 ( 500 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) lowmem : 0xc0000000 - 0xdf780000 ( 503 MB) .init : 0xc041f000 - 0xc046b000 ( 304 kB) .data : 0xc0355f5f - 0xc04191bc ( 780 kB) .text : 0xc0100000 - 0xc0355f5f (2391 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5347.27 BogoMIPS (lpj=8909242) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed Early unpacking initramfs... done ACPI: Core revision 20070126 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09 Total of 1 processors activated (5347.27 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 Brought up 1 CPUs Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=3 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) * The chipset may have PM-Timer Bug. Due to workarounds for a bug, * this clock source is slow. If you are sure your timer does not have * this bug, please use "acpi_pm_good" to disable the workaround PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI: RTC can wake from S4 pnp: 00:01: iomem range 0xeffffc00-0xefffffff has been reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:02:0a.0 IO window: 3000-3fff MEM window: b0200000-b02fffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-3fff MEM window: b0100000-b02fffff PREFETCH window: d0000000-dfffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 16384 (order: 5, 196608 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 28426k freed Simple Boot Flag at 0x6c set to 0x1 IBM machine detected. Enabling interrupts during APM calls. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:03:00.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: module loaded input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:KBC] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 304k freed input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (27 C) Linux agpgart interface v0.102 (c) Dave Jones rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 50692 usecs intel8x0: clocking to 48000 libata version 2.21 loaded. ata_piix 0000:00:1f.1: version 2.11 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15 ata1.00: ATAPI: SONY CD-RW CRX175A1, 5YS3, max UDMA/33 ata1.00: configured for UDMA/33 ata2.00: ATA-7: ST3250620A, 3.AAE, max UDMA/100 ata2.00: 488397168 sectors, multi 16: LBA48 ata2.00: configured for UDMA/100 scsi 0:0:0:0: CD-ROM SONY CD-RW CRX175A1 5YS3 PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA ST3250620A 3.AA PQ: 0 ANSI: 5 e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 19 e100: eth0: e100_probe: addr 0xb0100000, irq 19, MAC addr 00:0D:60:3D:10:4C eepro100.c:v1.09j-t 9/29/99 Donald Becker eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others PPP generic driver version 2.4.2 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xb0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-2: new full speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 1:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 usbcore: registered new interface driver snd-usb-audio usbcore: registered new interface driver hiddev input: Logitech Optical USB Mouse as /class/input/input4 input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md: linear personality registered for level -1 md: multipath personality registered for level -4 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 3352.800 MB/sec raid5: using function: pIII_sse (3352.800 MB/sec) raid6: int32x1 658 MB/s raid6: int32x2 855 MB/s raid6: int32x4 985 MB/s raid6: int32x8 608 MB/s raid6: mmxx1 2143 MB/s raid6: mmxx2 2757 MB/s raid6: sse1x1 1312 MB/s raid6: sse1x2 2415 MB/s raid6: sse2x1 2260 MB/s raid6: sse2x2 2996 MB/s raid6: using algorithm sse2x2 (2996 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com ACPI: PCI interrupt for device 0000:02:08.0 disabled e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 19 e100: eth0: e100_probe: addr 0xb0100000, irq 19, MAC addr 00:0D:60:3D:10:4C