# Makefile.in generated by automake 1.9.6 from Makefile.am.
# Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



#
# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
#
# Copyright (c) 1998-2004 Luca Deri <deri@ntop.org>
# Updated 1Q 2000 Rocco Carbone <rocco@ntop.org>
# Updates 2003-2004 Luca Deri and Burton Strauss
#
# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#




srcdir = .
top_srcdir = .

pkgdatadir = $(datadir)/ntop
pkglibdir = $(libdir)/ntop
pkgincludedir = $(includedir)/ntop
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i686-redhat-linux-gnu
host_triplet = i686-redhat-linux-gnu
target_triplet = i686-redhat-linux-gnu
bin_PROGRAMS = ntop$(EXEEXT)
EXTRA_PROGRAMS = ntops$(EXEEXT)
DIST_COMMON = README $(am__configure_deps) $(noinst_HEADERS) \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/config.h.in $(top_srcdir)/configure AUTHORS COPYING \
	ChangeLog INSTALL NEWS THANKS compile config.guess config.sub \
	depcomp install-sh ltmain.sh missing mkinstalldirs
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
	"$(DESTDIR)$(bindir)" "$(DESTDIR)$(man8dir)"
libLTLIBRARIES_INSTALL = $(INSTALL)
LTLIBRARIES = $(lib_LTLIBRARIES)
am__DEPENDENCIES_1 =
am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1)
am_libntop_la_OBJECTS = address.lo argv.lo dataFormat.lo fcUtils.lo \
	getopt.lo getopt1.lo globals-core.lo hash.lo iface.lo \
	initialize.lo l7.lo leaks.lo ntop.lo pbuf.lo database.lo \
	plugin.lo prefs.lo protocols.lo sessions.lo term.lo util.lo \
	utildl.lo traffic.lo vendor.lo version.lo ntop_darwin.lo
libntop_la_OBJECTS = $(am_libntop_la_OBJECTS)
am_libntopreport_la_OBJECTS = emitter.lo globals-report.lo graph.lo \
	fcReport.lo http.lo report.lo reportUtils.lo ssl.lo \
	webInterface.lo
libntopreport_la_OBJECTS = $(am_libntopreport_la_OBJECTS)
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
PROGRAMS = $(bin_PROGRAMS)
am_ntop_OBJECTS = ntop-main.$(OBJEXT) ntop-admin.$(OBJEXT)
ntop_OBJECTS = $(am_ntop_OBJECTS)
ntops_SOURCES = ntops.c
ntops_OBJECTS = ntops.$(OBJEXT)
ntops_LDADD = $(LDADD)
binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
SCRIPTS = $(bin_SCRIPTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(libntop_la_SOURCES) $(libntopreport_la_SOURCES) \
	$(ntop_SOURCES) ntops.c
DIST_SOURCES = $(libntop_la_SOURCES) $(libntopreport_la_SOURCES) \
	$(ntop_SOURCES) ntops.c
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(man_MANS)
HEADERS = $(noinst_HEADERS)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print

#
# Fake out the missing tests for the auto* tools
#
ACLOCAL = /bin/sh ./missing --run echo
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} /root/source/ntop-source/ntop/missing --run tar
AR = ar
AS = as
AUTOCONF = /bin/sh ./missing --run echo
AUTOHEADER = /bin/sh ./missing --run echo
AUTOMAKE = /bin/sh ./missing --run echo
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CCLD = gcc
CFG_CONFIGFILE_DIR = /usr/local/etc/ntop
CFG_DATAFILE_DIR = /usr/local/share/ntop
CFG_DBFILE_DIR = /usr/local/var/ntop
CFG_PLUGIN_DIR = /usr/local/lib/ntop/plugins
CFG_RUN_DIR = /usr/local/var/ntop
CFLAGS = -g -O2 -I/usr/local/include -Wshadow -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations -Wnested-externs  -fPIC -DPIC
CORELIBS =  -L/root/source/glibc-build -lpcap
CPP = gcc -E
CPPFLAGS =  -DLINUX -I/usr/local/include 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = dlltool
DYN_FLAGS = 
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = grep -E
EXEEXT = 
F77 = f95
FFLAGS = -g -O2
INCS = -DINET6 -O2 -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables -g -lcrypto -Dlinux -I/usr/include/rpm -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -I. -I/usr/include/net-snmp 
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LDFLAGS =  -L/root/source/glibc-build
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBTOOL_DEPS = ./ltmain.sh
LN_S = ln -s
LTLIBOBJS = 
MAKEINFO = ${SHELL} /root/source/ntop-source/ntop/missing --run makeinfo
MAKE_SHARED_LIBRARY_PARM = -shared -flat_namespace
MYSQL = 
NETSNMP = net-snmp-config
NTOP_VERSION_EXTRA = 
OBJDUMP = objdump
OBJEXT = o
PACKAGE = ntop
PACKAGE_BUGREPORT = 
PACKAGE_NAME = ntop
PACKAGE_STRING = ntop 3.3.4
PACKAGE_TARNAME = ntop
PACKAGE_VERSION = 3.3.4
PATH_SEPARATOR = :
PLUGINS = plugins
RANLIB = ranlib
RRD_INC = 
RRD_LIB = 
SCRIPTVER = v3.3.4-22-11-2007
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/sh
SNMP_LIBS = 
SO_VERSION_PATCH = 
STRIP = strip
VERSION = 3.3.4
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 = f95
ac_ct_MYSQL = 
ac_ct_NETSNMP = net-snmp-config
ac_ct_RANLIB = ranlib
ac_ct_STRIP = strip
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__fastdepCXX_FALSE = #
am__fastdepCXX_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i686-redhat-linux-gnu
build_alias = 
build_cpu = i686
build_os = linux-gnu
build_vendor = redhat
datadir = ${prefix}/share
exec_prefix = ${prefix}
host = i686-redhat-linux-gnu
host_alias = 
host_cpu = i686
host_os = linux-gnu
host_vendor = redhat
includedir = ${prefix}/include
infodir = ${prefix}/info
install_sh = /root/source/ntop-source/ntop/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/man
mkdir_p = mkdir -p --
oldincludedir = /usr/include
prefix = /usr/local
program_transform_name = s,x,x,
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
sysconfdir = ${prefix}/etc
target = i686-redhat-linux-gnu
target_alias = 
target_cpu = i686
target_os = linux-gnu
target_vendor = redhat
AUTOMAKE_OPTIONS = 1.6   # Require Automake 1.6 or better.

#
# The name of the game with its own major, minor and release version.
#
PKGNAME = ntop
PROGRAM = $(PKGNAME)-$(VERSION)
INCLUDES = -I. $(INCS) ${RRD_INC}
BASE_LIBS = -lpthread -lcrypt -lc -lssl -lrrd_th -lpcre -lgdbm -lz -L/usr/lib -lnetsnmp -lcrypto -lm -L/usr/lib/lib -lwrap   -L/usr/local/lib -lpcap ${RRD_LIB}

#AM_CFLAGS =
#AM_LDFLAGS= 
DISTCLEANFILES = trivialcompilemessage *.db #* *~ *.log
CLEANFILES = $(DISTCLEANFILES) stamp-h1
INSTALLCLEANFILES = addressQueue.db dnsCache.db

# A list of all the files in the current directory which can be regenerated
MAINTAINERCLEANFILES = COPYING Makefile.in aclocal.m4 config.guess \
                       config.h.in config.sub configure install-sh \
                       ltmain.sh missing mkinstalldirs \
                       stamp-h.in

SUBDIRS = . plugins
ETTER_PASSIVE_FILE = etter.finger.os
ETTER_PASSIVE = $(ETTER_PASSIVE_FILE).gz
ETTER_PASSIVE_DOWNLOAD_FROM = "http://cvs.sourceforge.net/viewcvs.py/ettercap/ettercap_ng/share"
ETTER_PASSIVE_DOWNLOAD_PARMS = "rev=HEAD"
NTOPDATA = ntop-cert.pem \
           p2c.opt.table.gz \
           $(ETTER_PASSIVE) \
           oui.txt.gz \
           specialMAC.txt.gz

NTOPHTML = html html/*.js html/*.html  html/*.gif html/*.jpg html/*.ico html/*.png \
           html/*.css html/*.dtd \
	   html/PlotKit \
	   html/PlotKit/*js \
	   html/MochiKit \
	   html/MochiKit/*js \
	   html/img_inquisitor \
	   html/img_inquisitor/*gif \
	   html/jscalendar \
	   html/jscalendar/*js \
	   html/jscalendar/lang \
	   html/jscalendar/lang/*js \
           html/statsicons \
           html/statsicons/flags html/statsicons/os \
           html/statsicons/flags/*.gif html/statsicons/os/*.gif \
           html/PlotKit html/PlotKit/*.js \
           html/MochiKit html/MochiKit/*.js

WEBFILES = `cat www/FILES`
PLUGINSFILES = `cat plugins/FILES`
DATABASEFILES = `cat database/FILES`
DOCSFILES = `cat docs/FILES`
bin_SCRIPTS = 
ntop_SOURCES = main.c admin.c
ntop_DEPENDENCIES = libntopreport.la libntop.la
ntop_LDADD = libntopreport.la libntop.la $(BASE_LIBS)
ntop_LDFLAGS = $(AM_LDFLAGS)
ntop_CFLAGS = 
noinst_HEADERS = getopt.h globals-core.h globals-report.h ntop.h

# all the Archives
lib_LTLIBRARIES = libntop.la libntopreport.la

# core Archive, or the 'engine'
libntop_la_SOURCES = address.c    argv.c        dataFormat.c   fcUtils.c \
                     getopt.c     getopt1.c     globals-core.c \
                     hash.c       iface.c       initialize.c  l7.c leaks.c \
                     ntop.c       pbuf.c        database.c \
                     plugin.c     prefs.c       protocols.c   \
                     sessions.c   term.c        util.c        utildl.c \
                     traffic.c    vendor.c      version.c      \
                     ntop_darwin.c

libntop_la_DEPENDENCIES = config.h
libntop_la_LIBADD = $(BASE_LIBS)
libntop_la_LDFLAGS = $(AM_LDFLAGS) -release $(VERSION) -export-dynamic 

# Archive for http representation, or the 'viewer'
libntopreport_la_SOURCES = emitter.c       globals-report.c  graph.c \
                           fcReport.c      http.c          \
                           report.c        reportUtils.c     ssl.c   \
                           webInterface.c

libntopreport_la_DEPENDENCIES = libntop.la
libntopreport_la_LIBADD = libntop.la $(BASE_LIBS)
libntopreport_la_LDFLAGS = $(AM_LDFLAGS) -release $(VERSION) -export-dynamic 
man_MANS = ntop.8
CLEANLIST = `ls -l $(DESTDIR)$(libdir)/*ntop*.so $(DESTDIR)$(libdir)/*Plugin*.so | \
          grep -v $(VERSION) | \
          grep -v '\->' | \
          $(AWK) '{ print $$NF }'`


# Create ntop's package for Debian GNU/Linux using Official scripts
# Please keep silent the building process.
QUIET = 1> /dev/null 2>&1
all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
am--refresh:
	@:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

config.h: stamp-h1
	@if test ! -f $@; then \
	  rm -f stamp-h1; \
	  $(MAKE) stamp-h1; \
	else :; fi

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in:  $(am__configure_deps) 
	cd $(top_srcdir) && $(AUTOHEADER)
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    f=$(am__strip_dir) \
	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
	  else :; fi; \
	done

uninstall-libLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  p=$(am__strip_dir) \
	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
	done

clean-libLTLIBRARIES:
	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
libntop.la: $(libntop_la_OBJECTS) $(libntop_la_DEPENDENCIES) 
	$(LINK) -rpath $(libdir) $(libntop_la_LDFLAGS) $(libntop_la_OBJECTS) $(libntop_la_LIBADD) $(LIBS)
libntopreport.la: $(libntopreport_la_OBJECTS) $(libntopreport_la_DEPENDENCIES) 
	$(LINK) -rpath $(libdir) $(libntopreport_la_LDFLAGS) $(libntopreport_la_OBJECTS) $(libntopreport_la_LIBADD) $(LIBS)
install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  if test -f $$p \
	     || test -f $$p1 \
	  ; then \
	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
	  else :; fi; \
	done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
	done

clean-binPROGRAMS:
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  echo " rm -f $$p $$f"; \
	  rm -f $$p $$f ; \
	done
ntop$(EXEEXT): $(ntop_OBJECTS) $(ntop_DEPENDENCIES) 
	@rm -f ntop$(EXEEXT)
	$(LINK) $(ntop_LDFLAGS) $(ntop_OBJECTS) $(ntop_LDADD) $(LIBS)
ntops$(EXEEXT): $(ntops_OBJECTS) $(ntops_DEPENDENCIES) 
	@rm -f ntops$(EXEEXT)
	$(LINK) $(ntops_LDFLAGS) $(ntops_OBJECTS) $(ntops_LDADD) $(LIBS)
install-binSCRIPTS: $(bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
	@list='$(bin_SCRIPTS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f $$d$$p; then \
	    f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
	    echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
	    $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \
	  else :; fi; \
	done

uninstall-binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_SCRIPTS)'; for p in $$list; do \
	  f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
	done

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

include ./$(DEPDIR)/address.Plo
include ./$(DEPDIR)/argv.Plo
include ./$(DEPDIR)/dataFormat.Plo
include ./$(DEPDIR)/database.Plo
include ./$(DEPDIR)/emitter.Plo
include ./$(DEPDIR)/fcReport.Plo
include ./$(DEPDIR)/fcUtils.Plo
include ./$(DEPDIR)/getopt.Plo
include ./$(DEPDIR)/getopt1.Plo
include ./$(DEPDIR)/globals-core.Plo
include ./$(DEPDIR)/globals-report.Plo
include ./$(DEPDIR)/graph.Plo
include ./$(DEPDIR)/hash.Plo
include ./$(DEPDIR)/http.Plo
include ./$(DEPDIR)/iface.Plo
include ./$(DEPDIR)/initialize.Plo
include ./$(DEPDIR)/l7.Plo
include ./$(DEPDIR)/leaks.Plo
include ./$(DEPDIR)/ntop-admin.Po
include ./$(DEPDIR)/ntop-main.Po
include ./$(DEPDIR)/ntop.Plo
include ./$(DEPDIR)/ntop_darwin.Plo
include ./$(DEPDIR)/ntops.Po
include ./$(DEPDIR)/pbuf.Plo
include ./$(DEPDIR)/plugin.Plo
include ./$(DEPDIR)/prefs.Plo
include ./$(DEPDIR)/protocols.Plo
include ./$(DEPDIR)/report.Plo
include ./$(DEPDIR)/reportUtils.Plo
include ./$(DEPDIR)/sessions.Plo
include ./$(DEPDIR)/ssl.Plo
include ./$(DEPDIR)/term.Plo
include ./$(DEPDIR)/traffic.Plo
include ./$(DEPDIR)/util.Plo
include ./$(DEPDIR)/utildl.Plo
include ./$(DEPDIR)/vendor.Plo
include ./$(DEPDIR)/version.Plo
include ./$(DEPDIR)/webInterface.Plo

.c.o:
	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c $<

.c.obj:
	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
#	source='$<' object='$@' libtool=yes \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(LTCOMPILE) -c -o $@ $<

ntop-main.o: main.c
	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ntop_CFLAGS) $(CFLAGS) -MT ntop-main.o -MD -MP -MF "$(DEPDIR)/ntop-main.Tpo" -c -o ntop-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c; \
	then mv -f "$(DEPDIR)/ntop-main.Tpo" "$(DEPDIR)/ntop-main.Po"; else rm -f "$(DEPDIR)/ntop-main.Tpo"; exit 1; fi
#	source='main.c' object='ntop-main.o' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ntop_CFLAGS) $(CFLAGS) -c -o ntop-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c

ntop-main.obj: main.c
	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ntop_CFLAGS) $(CFLAGS) -MT ntop-main.obj -MD -MP -MF "$(DEPDIR)/ntop-main.Tpo" -c -o ntop-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi`; \
	then mv -f "$(DEPDIR)/ntop-main.Tpo" "$(DEPDIR)/ntop-main.Po"; else rm -f "$(DEPDIR)/ntop-main.Tpo"; exit 1; fi
#	source='main.c' object='ntop-main.obj' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ntop_CFLAGS) $(CFLAGS) -c -o ntop-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi`

ntop-admin.o: admin.c
	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ntop_CFLAGS) $(CFLAGS) -MT ntop-admin.o -MD -MP -MF "$(DEPDIR)/ntop-admin.Tpo" -c -o ntop-admin.o `test -f 'admin.c' || echo '$(srcdir)/'`admin.c; \
	then mv -f "$(DEPDIR)/ntop-admin.Tpo" "$(DEPDIR)/ntop-admin.Po"; else rm -f "$(DEPDIR)/ntop-admin.Tpo"; exit 1; fi
#	source='admin.c' object='ntop-admin.o' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ntop_CFLAGS) $(CFLAGS) -c -o ntop-admin.o `test -f 'admin.c' || echo '$(srcdir)/'`admin.c

ntop-admin.obj: admin.c
	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ntop_CFLAGS) $(CFLAGS) -MT ntop-admin.obj -MD -MP -MF "$(DEPDIR)/ntop-admin.Tpo" -c -o ntop-admin.obj `if test -f 'admin.c'; then $(CYGPATH_W) 'admin.c'; else $(CYGPATH_W) '$(srcdir)/admin.c'; fi`; \
	then mv -f "$(DEPDIR)/ntop-admin.Tpo" "$(DEPDIR)/ntop-admin.Po"; else rm -f "$(DEPDIR)/ntop-admin.Tpo"; exit 1; fi
#	source='admin.c' object='ntop-admin.obj' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ntop_CFLAGS) $(CFLAGS) -c -o ntop-admin.obj `if test -f 'admin.c'; then $(CYGPATH_W) 'admin.c'; else $(CYGPATH_W) '$(srcdir)/admin.c'; fi`

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:
install-man8: $(man8_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man8dir)" || $(mkdir_p) "$(DESTDIR)$(man8dir)"
	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.8*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    8*) ;; \
	    *) ext='8' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
	done
uninstall-man8:
	@$(NORMAL_UNINSTALL)
	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.8*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    8*) ;; \
	    *) ext='8' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(am__remove_distdir)
	mkdir $(distdir)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && cd $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
	@cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(MANS) \
		$(HEADERS) config.h
install-binPROGRAMS: install-libLTLIBRARIES

installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man8dir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
	clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-hdr distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-data-local install-man

install-exec-am: install-binPROGRAMS install-binSCRIPTS \
	install-libLTLIBRARIES

install-info: install-info-recursive

install-man: install-man8

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
	uninstall-info-am uninstall-libLTLIBRARIES uninstall-man

uninstall-info: uninstall-info-recursive

uninstall-man: uninstall-man8

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
	check-am clean clean-binPROGRAMS clean-generic \
	clean-libLTLIBRARIES clean-libtool clean-recursive ctags \
	ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \
	dist-tarZ dist-zip distcheck distclean distclean-compile \
	distclean-generic distclean-hdr distclean-libtool \
	distclean-recursive distclean-tags distcleancheck distdir \
	distuninstallcheck dvi dvi-am html html-am info info-am \
	install install-am install-binPROGRAMS install-binSCRIPTS \
	install-data install-data-am install-data-local install-exec \
	install-exec-am install-info install-info-am \
	install-libLTLIBRARIES install-man install-man8 install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \
	pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
	uninstall-binPROGRAMS uninstall-binSCRIPTS uninstall-info-am \
	uninstall-libLTLIBRARIES uninstall-man uninstall-man8


.PHONY: snapshot

acinclude.m4: acinclude.m4.ntop libtool.m4.in
	@cat acinclude.m4.ntop libtool.m4.in >acinclude.m4

#
# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# rules to handle nroff documentation
# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
#
ntop.8:
	@echo ""

ntop.txt: ntop.8
	@echo ""
	@echo "-----------------------------------------------"
	@echo "Converting $< to ASCII format  .... Please wait"
	@echo ""
	@echo "   Oh, yeah..."
	@echo "       If we hang here, then you are probably "
	@echo "       running make not GNU make (gmake)"
	@echo ""
	@groff -mandoc -Tascii $< | LANG=C sed 's/_^H//g' | LANG=C sed 's/^H[ -\~]//g' > ntop.txt
	@echo "$@ done !"
	@echo "-----------------------------------------------"
	@echo ""

# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
# rules to translate ASCII files to HTML
# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

ntop.html: ntop.8
	@echo ""
	@echo "-----------------------------------------------"
	@echo "Converting $< to HTML format  .... Please wait"
	@echo ""
	@echo "   Oh, yeah..."
	@echo "       If we hang here, then you are probably "
	@echo "       running make not GNU make (gmake)"
	@echo ""
	@groff -mandoc -Thtml $< | LANG=C sed 's/_^H//g' | LANG=C sed 's/^H[ -\~]//g' | gawk -f utils/insertssi.awk > html/ntop.html
	@cp -f html/ntop.html ntop.html
	@echo "$@ done !"
	@echo "-----------------------------------------------"
	@echo ""

# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
# rules to translate FAQ file to HTML
# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

faq.html: docs/FAQ
	@echo ""
	@echo "-----------------------------------------------"
	@echo "Converting $< to HTML format  .... Please wait"
	@echo ""
	@echo "   Oh, yeah..."
	@echo "       If we hang here, then you are probably "
	@echo "       running make not GNU make (gmake)"
	@echo ""
	@gawk -f utils/faqtohtml.awk $< | LANG=C sed 's/_^H//g' | LANG=C sed 's/^H[ -\~]//g' > html/faq.html
	@cp -f html/faq.html faq.html
	@echo "$@ done !"
	@echo "-----------------------------------------------"
	@echo ""

ntop-cert.pem:
	openssl req -new -x509 -sha1 -extensions v3_ca -nodes -days 365 -out cert.pem
	cat privkey.pem cert.pem > ntop-cert.pem
	/bin/rm -f privkey.pem cert.pem

listlibclean:
	@echo ""
	@echo "This is a list of old shared library files that will be deleted"
	@echo "if you run 'make libclean'"
	@echo ""
	@for file in $(CLEANLIST); do \
          if test -f $$file; then \
             echo "   $$file"; \
          fi; \
        done
	@echo ""

libclean:
	@echo ""
	@echo "Cleanup of old shared library files..."
	@echo ""
	@echo "  This is a list of files that will be deleted..."
	@echo ""
	@for file in $(CLEANLIST); do \
          if test -f $$file; then \
             echo "   $$file"; \
          fi; \
        done
	@echo ""
	@echo ""
	@echo "Press cntl-c to stop or enter to continue and delete these files..."
	@read select
	@echo ""
	@for file in $(CLEANLIST); do \
          if test -f $$file; then \
             echo "   ...Deleting $$file"; \
             rm -f $$file; \
          fi; \
        done

install: install-recursive

	@mkdir -p $(DESTDIR)/$(CFG_DBFILE_DIR)

	@echo ""
	@echo "------------------------------------------------------------"
	@echo ""
	@echo "  Cleanup of old database files..."
	@echo ""
	@for file in $(INSTALLCLEANFILES); do \
	  if test -f $(DESTDIR)$(datadir)/ntop/$$file; then \
	     echo "        ...Deleting $(DESTDIR)$(datadir)/ntop/$$file"; \
	     rm -rf $(DESTDIR)$(datadir)/ntop/$$file; \
	  fi; \
	done

	@if ! test -f $(DESTDIR)/$(CFG_CONFIGFILE_DIR)/AS-list.txt.gz; then \
	  echo ""; \
	  echo ""; \
	  echo "------------------------------------------------------------"; \
	  echo ""; \
	  echo "NOTE: ntop can show traffic by AS (Autonomous System) Number"; \
	  echo ""; \
	  echo "      Because this feature consumes a number of MB of memory,"; \
	  echo "      the datafile is not installed by default."; \
	  echo ""; \
	  echo "      Which, if there is no file - from this or a previous"; \
	  echo "      install - effectively disables the ASN feature."; \
	  echo ""; \
	  echo "      To install the AS data, type:"; \
	  echo ""; \
	  echo "# make install-data-as"; \
	fi

	@if test ".$(CLEANLIST)" != "."; then \
	  echo ""; \
	  echo ""; \
	  echo "************************************************************"; \
	  echo ""; \
	  echo "  There appear to be old shared library files on your system."; \
	  echo "  You may wish to delete these if you are no longer using the"; \
	  echo "  older versions."; \
	  echo ""; \
	  echo "  To see the list of files, run"; \
	  echo ""; \
	  echo "# make listlibclean"; \
	  echo ""; \
	  echo "  To delete them (you will have a chance to abort before the"; \
	  echo "  actual delete):"; \
	  echo ""; \
	  echo "# make libclean"; \
	  echo ""; \
	fi

	@if test -f $(DESTDIR)/$(datadir)/ntop/warnuser; then \
	  echo ""; \
	  echo ""; \
	  echo "************************************************************"; \
	  echo "************************************************************"; \
	  echo ""; \
	  echo "  WARNING: This install created a directory for the ntop"; \
	  echo "           files and databases:"; \
	  echo ""; \
	  echo "             $(DESTDIR)/$(datadir)/ntop"; \
	  echo ""; \
	  echo "           This directory MUST be owned by the user"; \
	  echo "           which you are going to use to run ntop."; \
	  echo ""; \
	  echo "           The command you must issue is something like:"; \
	  echo ""; \
	  echo "           chown -R ntop.ntop $(DESTDIR)/$(datadir)/ntop"; \
	  echo "     or    chown -R ntop:users $(DESTDIR)/$(datadir)/ntop"; \
	  echo ""; \
	  echo "           man chown to check the syntax for YOUR system"; \
	  echo ""; \
	  echo "************************************************************"; \
	  echo "************************************************************"; \
	  echo ""; \
	  echo ""; \
	  rm -f $(DESTDIR)/$(datadir)/ntop/warnuser; \
	fi

install-data-as:
	@$(top_srcdir)/mkinstalldirs $(DESTDIR)/$(CFG_CONFIGFILE_DIR);
	@for file in AS-list.txt.gz; do \
          if test -d $$file; then \
             $(top_srcdir)/mkinstalldirs $(DESTDIR)/$(CFG_CONFIGFILE_DIR)/$$file; \
           else \
             cp -p $$file $(DESTDIR)/$(CFG_CONFIGFILE_DIR)/$$file; \
          fi; \
        done

install-data-local: ntop.txt ntop.html faq.html
	@$(top_srcdir)/mkinstalldirs $(DESTDIR)/$(libdir)/plugins;
	@if ! test -d $(DESTDIR)/$(datadir)/ntop; then \
	  $(top_srcdir)/mkinstalldirs $(DESTDIR)/$(datadir)/ntop; \
	  touch $(DESTDIR)/$(datadir)/ntop/warnuser; \
	else \
	  rm -f $(DESTDIR)/$(datadir)/ntop/warnuser; \
	fi
	@$(top_srcdir)/mkinstalldirs $(DESTDIR)/$(datadir)/ntop/html;
	@for file in $(NTOPHTML); do \
          if test -d $$file; then \
             $(top_srcdir)/mkinstalldirs $(DESTDIR)/$(datadir)/ntop/$$file; \
           else \
             cp -p $$file $(DESTDIR)/$(datadir)/ntop/$$file; \
          fi; \
        done
	@$(top_srcdir)/mkinstalldirs $(DESTDIR)/$(CFG_CONFIGFILE_DIR);
	@for file in $(NTOPDATA); do \
          if test -d $$file; then \
             $(top_srcdir)/mkinstalldirs $(DESTDIR)/$(CFG_CONFIGFILE_DIR)/$$file; \
           else \
             cp -p $$file $(DESTDIR)/$(CFG_CONFIGFILE_DIR)/$$file; \
          fi; \
        done

# build the IPX SAP table
sapt: saptable.h
	@cat Internet/novell-sap-numbers | cut -c1-3 | sed -f sapt.sed > saptable.h

# download the vendor information table
dnvt:
	@echo ""
	@echo ""
	@echo -n "Preparing "
	@if test -f oui.txt; then \
	  rm -rf oui.txt; \
	fi
	@if test -f oui.txt.gz.old; then \
	  rm -rf oui.txt.gz.old; \
	fi;
	@mv oui.txt.gz oui.txt.gz.old
	@echo "(old oui.txt.gz file is now oui.txt.gz.old)"
	@echo ""
	@wget -c http://standards.ieee.org/regauth/oui/oui.txt
	@gzip oui.txt
	@echo ""
	@echo ""
	@echo -n "Old file lines were: "
	@gunzip -c oui.txt.gz.old | wc -l
	@echo -n "New file lines are:  "
	@gunzip -c oui.txt.gz | wc -l
	@echo ""
	@echo ""
	@echo "New file is:"
	@ls -l oui.txt.gz

# download the Novell SAP Protocol information table
dnsapt:
	@(cd Internet; wget -c http://www.iana.org/assignments/novell-sap-numbers)

# download the passive ethernet fingerprint database
dnetter:
	@echo ""
	@echo ""
	@echo "Preparing "
	@echo ""

	@if test -f $(ETTER_PASSIVE).old; then \
	  echo "...Deleting prior file, $(ETTER_PASSIVE).old..."; \
	  rm -rf $(ETTER_PASSIVE).old; \
	fi;
	@if test -f $(ETTER_PASSIVE); then \
	  echo "...Moving current $(ETTER_PASSIVE) to $(ETTER_PASSIVE).old"; \
	  mv $(ETTER_PASSIVE) $(ETTER_PASSIVE).old; \
	fi;
	@for file in $(ETTER_PASSIVE) $(ETTER_PASSIVE).gz \
		$(ETTER_PASSIVE_FILE) $(ETTER_PASSIVE_FILE).gz; do \
          if test -f $$file; then \
	     echo "...Deleting prior file, $$file..."; \
             rm -rf $$file; \
          fi; \
        done
	@echo ""
	@echo "...Downloading new file..."
	@wget -O $(ETTER_PASSIVE_FILE) \
		$(ETTER_PASSIVE_DOWNLOAD_FROM)/$(ETTER_PASSIVE_FILE)?$(ETTER_PASSIVE_DOWNLOAD_PARMS)
	@echo ""
	@echo "gziping downloaded file..."
	@gzip $(ETTER_PASSIVE_FILE)
	@echo ""
	@echo ""
	@if test -f $(ETTER_PASSIVE).old; then \
	  echo -n "Old file lines were: "; \
	  gunzip -c $(ETTER_PASSIVE).old | wc -l; \
	fi;
	@echo -n "New file lines are:  "
	@gunzip -c $(ETTER_PASSIVE) | wc -l
	@echo ""
	@echo ""
	@echo "New file is:"
	@ls -l $(ETTER_PASSIVE)

# download the data for and make the p2c.opt.table
p2ctable:
	@utils/p2c

# ntop census
census-fail:
	@echo "This option is no longer available... thanks for trying"

census-ok:
	@echo "This option is no longer available... thanks for trying"
deb-official:
	@echo "Making Debian package using scripts in packages/debian.official/. Please be patient..."
	@fakeroot make -f packages/debian.official/rules binary $(QUIET)
	@rm -f packages/debian.official/files packages/debian.official/ntop.substvars
	@version=`head -1 packages/debian.official/changelog | cut -d " " -f 2 | sed -e 's|(||' | sed -e 's|)||'` && mv ../ntop_$$version_*.deb packages/debian.official/
	@rm -rf packages/debian.official/ntop
	@echo "Your Debian package is under packages/debian.official/"
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: