Nov 3 22:33:48 - pptp: Conntrackinfo = 2

Nov 4 12:56:12 - No response to 3 echo-requests

Nov 4 12:56:12 - Serial link appears to be disconnected.

Nov 4 12:56:12 - Couldn't increase MTU to 1500.

Nov 4 12:56:12 - Couldn't increase MRU to 1500

Nov 4 12:56:12 - LCP down.

Nov 4 12:56:13 - IPSEC EVENT: KLIPS device ipsec0 shut down.

Nov 4 12:56:18 - Connection terminated.

Nov 4 12:56:18 - Connect time 19902941.8 minutes.

Nov 4 12:56:18 - Sent 3277337468 bytes, received 2775267572 bytes.

Nov 4 12:56:18 - Doing disconnect

Nov 4 12:56:18 - Exit.

Nov 4 12:56:43 - Initialize LCP.

Nov 4 12:56:43 - Plugin pppoe loaded.

Nov 4 12:56:43 - PPPoE Plugin Initialized

Nov 4 12:56:43 - Plugin pppoe called.

Nov 4 12:56:43 - pppd 2.4.1 started by root, uid 0

Nov 4 12:56:43 - Sending PADI

Nov 4 12:56:43 - HOST_UNIQ successful match

Nov 4 12:56:43 - Got connection: 557

Nov 4 12:56:43 - Connecting PPPoE socket: 00:90:1a:42:71:0d 5705 eth1 0x42238

Nov 4 12:56:43 - using channel 2

Nov 4 12:56:43 - ppp0 Using interface ppp0

Nov 4 12:56:43 - ppp0 Connect: ppp0 <--> eth1

Nov 4 12:56:43 - Couldn't increase MTU to 1500.

Nov 4 12:56:43 - Couldn't increase MRU to 1500

Nov 4 12:56:43 - LCP is allowed to come up.

Nov 4 12:56:43 - Couldn't increase MRU to 1500

Nov 4 12:56:45 - CHAP authentication success

Nov 4 12:56:45 - local IP address xxx.xxx.xxx.xxx

Nov 4 12:56:45 - remote IP address 85.10.0.254

Nov 4 12:56:45 - primary DNS address 212.18.32.10

Nov 4 12:56:45 - secondary DNS address 212.18.32.12

Nov 4 12:57:05 - [VPN Log]: shutting down

Nov 4 12:57:07 - [VPN Log]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD)

Nov 4 12:57:07 - [VPN Log]: @(#) built on Aug 2 2007:11:09:37:

Nov 4 12:57:07 - [VPN Log]: Setting NAT-Traversal port-4500 floating to on

Nov 4 12:57:08 - [VPN Log]: port floating activation criteria nat_t=1/port_fload=1

Nov 4 12:57:08 - [VPN Log]: including NAT-Traversal patch (Version 0.6c)

Nov 4 12:57:08 - [VPN Log]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0)

Nov 4 12:57:08 - [VPN Log]: starting up 1 cryptographic helpers

Nov 4 12:57:08 - [VPN Log]: started helper pid=2642 (fd:5)

Nov 4 12:57:08 - [VPN Log]: Using KLIPS IPsec interface code on 2.4.27-star

Nov 4 12:57:08 - [VPN Log]: Changing to directory '/etc/ipsec.d/cacerts'

Nov 4 12:57:08 - [VPN Log]: Changing to directory '/etc/ipsec.d/aacerts'

Nov 4 12:57:08 - [VPN Log]: Changing to directory '/etc/ipsec.d/ocspcerts'

Nov 4 12:57:08 - [VPN Log]: Changing to directory '/etc/ipsec.d/crls'

Nov 4 12:57:08 - [VPN Log]: Warning: empty directory

Nov 4 13:02:18 - Send out NTP request to ntp.nasa.gov

Nov 4 13:03:41 - Send out NTP request to time-nw.nist.gov

Nov 4 13:05:55 - Send out NTP request to ntp.nasa.gov

Nov 4 13:05:58 - Receive NTP Reply from ntp.nasa.gov

Nov 4 13:06:17 - [VPN Log]: shutting down

Nov 4 13:06:17 - IPSEC EVENT: KLIPS device ipsec0 shut down.

Nov 4 13:06:19 - [VPN Log]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD)

Nov 4 13:06:19 - [VPN Log]: @(#) built on Aug 2 2007:11:09:37:

Nov 4 13:06:19 - [VPN Log]: Setting NAT-Traversal port-4500 floating to on

Nov 4 13:06:19 - [VPN Log]: port floating activation criteria nat_t=1/port_fload=1

Nov 4 13:06:19 - [VPN Log]: including NAT-Traversal patch (Version 0.6c)

Nov 4 13:06:19 - [VPN Log]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0)

Nov 4 13:06:19 - [VPN Log]: starting up 1 cryptographic helpers

Nov 4 13:06:19 - [VPN Log]: started helper pid=3126 (fd:5)

Nov 4 13:06:19 - [VPN Log]: Using KLIPS IPsec interface code on 2.4.27-star

Nov 4 13:06:20 - [VPN Log]: Changing to directory '/etc/ipsec.d/cacerts'

Nov 4 13:06:20 - [VPN Log]: Changing to directory '/etc/ipsec.d/aacerts'

Nov 4 13:06:20 - [VPN Log]: Changing to directory '/etc/ipsec.d/ocspcerts'

Nov 4 13:06:20 - [VPN Log]: Changing to directory '/etc/ipsec.d/crls'

Nov 4 13:06:20 - [VPN Log]: Warning: empty directory

Nov 5 01:29:07 - pptp: Conntrackinfo = 2

Nov 5 01:29:09 - pptp_help(): not a control pkt

Nov 5 10:35:10 - pptp: Conntrackinfo = 2

Nov 7 01:06:44 - eth0: received packet with own address as source address

Nov 7 07:42:45 - pptp: Conntrackinfo = 2

Nov 7 10:31:52 - H.323_NAT: partial packet 0/6 in 0/0

Nov 7 11:06:21 - Send out NTP request to ntp.nasa.gov

Nov 7 11:06:25 - Receive NTP Reply from ntp.nasa.gov

Nov 7 11:06:45 - [VPN Log]: shutting down

Nov 7 11:06:45 - IPSEC EVENT: KLIPS device ipsec0 shut down.

Nov 7 11:06:48 - [VPN Log]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD)

Nov 7 11:06:48 - [VPN Log]: @(#) built on Aug 2 2007:11:09:37:

Nov 7 11:06:48 - [VPN Log]: Setting NAT-Traversal port-4500 floating to on

Nov 7 11:06:48 - [VPN Log]: port floating activation criteria nat_t=1/port_fload=1

Nov 7 11:06:48 - [VPN Log]: including NAT-Traversal patch (Version 0.6c)

Nov 7 11:06:48 - [VPN Log]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0)

Nov 7 11:06:48 - [VPN Log]: starting up 1 cryptographic helpers

Nov 7 11:06:48 - [VPN Log]: started helper pid=3653 (fd:5)

Nov 7 11:06:48 - [VPN Log]: Using KLIPS IPsec interface code on 2.4.27-star

Nov 7 11:06:48 - [VPN Log]: Changing to directory '/etc/ipsec.d/cacerts'

Nov 7 11:06:48 - [VPN Log]: Changing to directory '/etc/ipsec.d/aacerts'

Nov 7 11:06:48 - [VPN Log]: Changing to directory '/etc/ipsec.d/ocspcerts'

Nov 7 11:06:48 - [VPN Log]: Changing to directory '/etc/ipsec.d/crls'

Nov 7 11:06:48 - [VPN Log]: Warning: empty directory

Nov 7 16:10:36 - H.323_NAT: partial packet 0/6 in 0/0

Nov 9 10:50:15 - No response to 3 echo-requests

Nov 9 10:50:15 - Serial link appears to be disconnected.

Nov 9 10:50:15 - Couldn't increase MTU to 1500.

Nov 9 10:50:15 - Couldn't increase MRU to 1500

Nov 9 10:50:15 - LCP down.

Nov 9 10:50:16 - IPSEC EVENT: KLIPS device ipsec0 shut down.

Nov 9 10:50:21 - Connection terminated.

Nov 9 10:50:21 - Connect time 7040.2 minutes.

Nov 9 10:50:21 - Sent 2782267144 bytes, received 3009400085 bytes.

Nov 9 10:50:21 - Doing disconnect

Nov 9 10:50:21 - Exit.

Nov 9 10:50:46 - Initialize LCP.

Nov 9 10:50:46 - Plugin pppoe loaded.

Nov 9 10:50:46 - PPPoE Plugin Initialized

Nov 9 10:50:46 - Plugin pppoe called.

Nov 9 10:50:46 - pppd 2.4.1 started by root, uid 0

Nov 9 10:50:46 - Sending PADI

Nov 9 10:50:46 - HOST_UNIQ successful match

Nov 9 10:50:46 - Got connection: 2bc1

Nov 9 10:50:46 - Connecting PPPoE socket: 00:90:1a:42:71:0d c12b eth1 0x42238

Nov 9 10:50:46 - using channel 3

Nov 9 10:50:46 - ppp0 Using interface ppp0

Nov 9 10:50:46 - ppp0 Connect: ppp0 <--> eth1

Nov 9 10:50:46 - Couldn't increase MTU to 1500.

Nov 9 10:50:46 - Couldn't increase MRU to 1500

Nov 9 10:50:46 - LCP is allowed to come up.

Nov 9 10:50:46 - Couldn't increase MRU to 1500

Nov 9 10:50:49 - CHAP authentication success

Nov 9 10:50:49 - local IP address xxx.xxx.xxx.xxx

Nov 9 10:50:49 - remote IP address 85.10.0.254

Nov 9 10:50:49 - primary DNS address 212.18.32.10

Nov 9 10:50:49 - secondary DNS address 212.18.32.12

Nov 9 10:51:09 - [VPN Log]: shutting down

Nov 9 10:51:12 - [VPN Log]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD)

Nov 9 10:51:12 - [VPN Log]: @(#) built on Aug 2 2007:11:09:37:

Nov 9 10:51:12 - [VPN Log]: Setting NAT-Traversal port-4500 floating to on

Nov 9 10:51:12 - [VPN Log]: port floating activation criteria nat_t=1/port_fload=1

Nov 9 10:51:12 - [VPN Log]: including NAT-Traversal patch (Version 0.6c)

Nov 9 10:51:12 - [VPN Log]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0)

Nov 9 10:51:12 - [VPN Log]: starting up 1 cryptographic helpers

Nov 9 10:51:12 - [VPN Log]: started helper pid=4352 (fd:5)

Nov 9 10:51:12 - [VPN Log]: Using KLIPS IPsec interface code on 2.4.27-star

Nov 9 10:51:12 - [VPN Log]: Changing to directory '/etc/ipsec.d/cacerts'

Nov 9 10:51:12 - [VPN Log]: Changing to directory '/etc/ipsec.d/aacerts'

Nov 9 10:51:12 - [VPN Log]: Changing to directory '/etc/ipsec.d/ocspcerts'

Nov 9 10:51:12 - [VPN Log]: Changing to directory '/etc/ipsec.d/crls'

Nov 9 10:51:12 - [VPN Log]: Warning: empty directory

Nov 9 10:56:23 - Send out NTP request to ntp.nasa.gov

Nov 9 10:56:26 - Receive NTP Reply from ntp.nasa.gov

Nov 9 10:56:45 - [VPN Log]: shutting down

Nov 9 10:56:45 - IPSEC EVENT: KLIPS device ipsec0 shut down.

Nov 9 10:56:47 - [VPN Log]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD)

Nov 9 10:56:47 - [VPN Log]: @(#) built on Aug 2 2007:11:09:37:

Nov 9 10:56:47 - [VPN Log]: Setting NAT-Traversal port-4500 floating to on

Nov 9 10:56:47 - [VPN Log]: port floating activation criteria nat_t=1/port_fload=1

Nov 9 10:56:47 - [VPN Log]: including NAT-Traversal patch (Version 0.6c)

Nov 9 10:56:47 - [VPN Log]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0)

Nov 9 10:56:47 - [VPN Log]: starting up 1 cryptographic helpers

Nov 9 10:56:47 - [VPN Log]: started helper pid=4920 (fd:5)

Nov 9 10:56:47 - [VPN Log]: Using KLIPS IPsec interface code on 2.4.27-star

Nov 9 10:56:48 - [VPN Log]: Changing to directory '/etc/ipsec.d/cacerts'

Nov 9 10:56:48 - [VPN Log]: Changing to directory '/etc/ipsec.d/aacerts'

Nov 9 10:56:48 - [VPN Log]: Changing to directory '/etc/ipsec.d/ocspcerts'

Nov 9 10:56:48 - [VPN Log]: Changing to directory '/etc/ipsec.d/crls'

Nov 9 10:56:48 - [VPN Log]: Warning: empty directory

Nov 11 22:11:06 - ipt_tcpmss_target: bad length (1188 bytes)

Nov 12 00:16:57 - pptp: Conntrackinfo = 2

Nov 12 03:42:13 - ipt_tcpmss_target: bad length (1188 bytes)

Nov 12 06:06:30 - ipt_tcpmss_target: bad length (346 bytes)

Nov 12 06:06:45 - ipt_tcpmss_target: bad length (1188 bytes)

Nov 12 06:06:50 - ipt_tcpmss_target: bad length (944 bytes)

Nov 12 06:06:56 - ipt_tcpmss_target: bad length (578 bytes)

Nov 12 06:07:06 - ipt_tcpmss_target: bad length (1188 bytes)

Nov 12 06:08:41 - ipt_tcpmss_target: bad length (1066 bytes)

Nov 12 06:08:50 - ipt_tcpmss_target: bad length (822 bytes)

Nov 12 06:09:22 - ipt_tcpmss_target: bad length (1188 bytes)

Nov 12 06:09:46 - ipt_tcpmss_target: bad length (1476 bytes)

Nov 12 06:09:46 - ipt_tcpmss_target: bad length (40 bytes)

Nov 12 06:09:49 - ipt_tcpmss_target: bad length (572 bytes)

Nov 12 06:10:01 - ipt_tcpmss_target: bad length (1188 bytes)

Nov 12 06:10:25 - ipt_tcpmss_target: bad length (1066 bytes)

Nov 12 06:10:27 - ipt_tcpmss_target: bad length (1492 bytes)

Nov 12 06:10:29 - ipt_tcpmss_target: bad length (276 bytes)

Nov 12 06:10:34 - ipt_tcpmss_target: bad length (944 bytes)

Nov 12 06:10:39 - ipt_tcpmss_target: bad length (700 bytes)

Nov 12 06:11:07 - ipt_tcpmss_target: bad length (944 bytes)

Nov 12 06:11:10 - ipt_tcpmss_target: bad length (1188 bytes)

Nov 12 07:40:05 - ipt_tcpmss_target: bad length (1188 bytes)

Nov 12 07:40:20 - ipt_tcpmss_target: bad length (1492 bytes)

Nov 12 07:40:20 - ipt_tcpmss_target: bad length (102 bytes)

Nov 12 08:36:06 - No response to 3 echo-requests

Nov 12 08:36:06 - Serial link appears to be disconnected.

Nov 12 08:36:06 - Couldn't increase MTU to 1500.

Nov 12 08:36:06 - Couldn't increase MRU to 1500

Nov 12 08:36:06 - LCP down.

Nov 12 08:36:07 - IPSEC EVENT: KLIPS device ipsec0 shut down.

Nov 12 08:36:12 - Connection terminated.

Nov 12 08:36:12 - Connect time 4165.6 minutes.

Nov 12 08:36:12 - Sent 364803712 bytes, received 1062479758 bytes.

Nov 12 08:36:12 - Doing disconnect

Nov 12 08:36:12 - Exit.

Nov 12 08:36:37 - Initialize LCP.

Nov 12 08:36:37 - Plugin pppoe loaded.

Nov 12 08:36:37 - PPPoE Plugin Initialized

Nov 12 08:36:37 - Plugin pppoe called.

Nov 12 08:36:07 - IPSEC EVENT: KLIPS device ipsec0 shut down.

Nov 12 08:36:12 - Connection terminated.

Nov 12 08:36:12 - Connect time 4165.6 minutes.

Nov 12 08:36:12 - Sent 364803712 bytes, received 1062479758 bytes.

Nov 12 08:36:12 - Doing disconnect

Nov 12 08:36:12 - Exit.

Nov 12 08:36:37 - Initialize LCP.

Nov 12 08:36:37 - Plugin pppoe loaded.

Nov 12 08:36:37 - PPPoE Plugin Initialized

Nov 12 08:36:37 - Plugin pppoe called.

Nov 12 08:36:37 - pppd 2.4.1 started by root, uid 0

Nov 12 08:36:37 - Sending PADI

Nov 12 08:36:37 - HOST_UNIQ successful match

Nov 12 08:36:37 - Got connection: 3935

Nov 12 08:36:37 - Connecting PPPoE socket: 00:90:1a:42:71:0d 3539 eth1 0x42238

Nov 12 08:36:37 - using channel 4

Nov 12 08:36:37 - ppp0 Using interface ppp0

Nov 12 08:36:37 - ppp0 Connect: ppp0 <--> eth1

Nov 12 08:36:37 - Couldn't increase MTU to 1500.

Nov 12 08:36:37 - Couldn't increase MRU to 1500

Nov 12 08:36:37 - LCP is allowed to come up.

Nov 12 08:36:37 - Couldn't increase MRU to 1500

Nov 12 08:36:41 - CHAP authentication success

Nov 12 08:36:41 - local IP address xxx.xxx.xxx.xxx

Nov 12 08:36:41 - remote IP address 85.10.0.254

Nov 12 08:36:41 - primary DNS address 212.18.32.10

Nov 12 08:36:41 - secondary DNS address 212.18.32.12

Nov 12 08:37:01 - [VPN Log]: shutting down

Nov 12 08:37:04 - [VPN Log]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD)

Nov 12 08:37:04 - [VPN Log]: @(#) built on Aug 2 2007:11:09:37:

Nov 12 08:37:04 - [VPN Log]: Setting NAT-Traversal port-4500 floating to on

Nov 12 08:37:04 - [VPN Log]: port floating activation criteria nat_t=1/port_fload=1

Nov 12 08:37:04 - [VPN Log]: including NAT-Traversal patch (Version 0.6c)

Nov 12 08:37:04 - [VPN Log]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0)

Nov 12 08:37:04 - [VPN Log]: starting up 1 cryptographic helpers

Nov 12 08:37:04 - [VPN Log]: started helper pid=5655 (fd:5)

Nov 12 08:37:04 - [VPN Log]: Using KLIPS IPsec interface code on 2.4.27-star

Nov 12 08:37:04 - [VPN Log]: Changing to directory '/etc/ipsec.d/cacerts'

Nov 12 08:37:04 - [VPN Log]: Changing to directory '/etc/ipsec.d/aacerts'

Nov 12 08:37:04 - [VPN Log]: Changing to directory '/etc/ipsec.d/ocspcerts' 0

Nov 12 08:37:04 - [VPN Log]: Changing to directory '/etc/ipsec.d/crls'

Nov 12 08:37:04 - [VPN Log]: Warning: empty directory

Nov 12 08:42:15 - Send out NTP request to ntp.nasa.gov

Nov 12 08:42:19 - Receive NTP Reply from ntp.nasa.gov

Nov 12 08:42:39 - [VPN Log]: shutting down

Nov 12 08:42:39 - IPSEC EVENT: KLIPS device ipsec0 shut down.

Nov 12 08:42:41 - [VPN Log]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD)

Nov 12 08:42:41 - [VPN Log]: @(#) built on Aug 2 2007:11:09:37:

Nov 12 08:42:41 - [VPN Log]: Setting NAT-Traversal port-4500 floating to on

Nov 12 08:42:41 - [VPN Log]: port floating activation criteria nat_t=1/port_fload=1

Nov 12 08:42:41 - [VPN Log]: including NAT-Traversal patch (Version 0.6c)

Nov 12 08:42:41 - [VPN Log]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0)

Nov 12 08:42:41 - [VPN Log]: starting up 1 cryptographic helpers

Nov 12 08:42:41 - [VPN Log]: started helper pid=6209 (fd:5)

Nov 12 08:42:41 - [VPN Log]: Using KLIPS IPsec interface code on 2.4.27-star

Nov 12 08:42:42 - [VPN Log]: Changing to directory '/etc/ipsec.d/cacerts'

Nov 12 08:42:42 - [VPN Log]: Changing to directory '/etc/ipsec.d/aacerts'

Nov 12 08:42:42 - [VPN Log]: Changing to directory '/etc/ipsec.d/ocspcerts'

Nov 12 08:42:42 - [VPN Log]: Changing to directory '/etc/ipsec.d/crls'

Nov 12 08:42:42 - [VPN Log]: Warning: empty directory

Nov 12 11:16:17 - pptp: Conntrackinfo = 2

Nov 12 14:31:48 - pptp: Conntrackinfo = 2

Nov 12 14:36:48 - pptp: Conntrackinfo = 2

Nov 13 11:17:11 - ipt_tcpmss_target: bad length (1188 bytes)

Nov 13 11:39:38 - pptp: Conntrackinfo = 2

Nov 14 08:02:00 - No response to 3 echo-requests

Nov 14 08:02:00 - Serial link appears to be disconnected.

Nov 14 08:02:00 - Couldn't increase MTU to 1500.

Nov 14 08:02:00 - Couldn't increase MRU to 1500

Nov 14 08:02:00 - LCP down.

Nov 14 08:02:01 - IPSEC EVENT: KLIPS device ipsec0 shut down.

Nov 14 08:02:06 - Connection terminated.

Nov 14 08:02:06 - Connect time 2828.0 minutes.

Nov 14 08:02:06 - Sent 3852699580 bytes, received 1936298268 bytes.

Nov 14 08:02:06 - Doing disconnect

Nov 14 08:02:06 - Exit.

Nov 14 08:02:31 - Initialize LCP.

Nov 14 08:02:31 - Plugin pppoe loaded.

Nov 14 08:02:31 - PPPoE Plugin Initialized

Nov 14 08:02:31 - Plugin pppoe called.

Nov 14 08:02:31 - pppd 2.4.1 started by root, uid 0

Nov 14 08:02:31 - Sending PADI

Nov 14 08:02:31 - HOST_UNIQ successful match

Nov 14 08:02:31 - Got connection: 3c56

Nov 14 08:02:31 - Connecting PPPoE socket: 00:90:1a:42:71:0d 563c eth1 0x42238

Nov 14 08:02:31 - using channel 5

Nov 14 08:02:31 - ppp0 Using interface ppp0

Nov 14 08:02:31 - ppp0 Connect: ppp0 <--> eth1

Nov 14 08:02:31 - Couldn't increase MTU to 1500.

Nov 14 08:02:31 - Couldn't increase MRU to 1500

Nov 14 08:02:31 - LCP is allowed to come up.

Nov 14 08:02:31 - Couldn't increase MRU to 1500

Nov 14 08:02:35 - CHAP authentication success

Nov 14 08:02:35 - local IP address xxx.xxx.xxx.xxx

Nov 14 08:02:35 - remote IP address 85.10.0.254

Nov 14 08:02:35 - primary DNS address 212.18.32.10

Nov 14 08:02:35 - secondary DNS address 212.18.32.12

Nov 14 08:02:55 - [VPN Log]: shutting down

Nov 14 08:02:57 - [VPN Log]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD)

Nov 14 08:02:57 - [VPN Log]: @(#) built on Aug 2 2007:11:09:37:

Nov 14 08:02:57 - [VPN Log]: Setting NAT-Traversal port-4500 floating to on

Nov 14 08:02:57 - [VPN Log]: port floating activation criteria nat_t=1/port_fload=1

Nov 14 08:02:57 - [VPN Log]: including NAT-Traversal patch (Version 0.6c)

Nov 14 08:02:57 - [VPN Log]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0)

Nov 14 08:02:57 - [VPN Log]: starting up 1 cryptographic helpers

Nov 14 08:02:57 - [VPN Log]: started helper pid=6878 (fd:5)

Nov 14 08:02:58 - [VPN Log]: Using KLIPS IPsec interface code on 2.4.27-star

Nov 14 08:02:58 - [VPN Log]: Changing to directory '/etc/ipsec.d/cacerts'

Nov 14 08:02:58 - [VPN Log]: Changing to directory '/etc/ipsec.d/aacerts'

Nov 14 08:02:58 - [VPN Log]: Changing to directory '/etc/ipsec.d/ocspcerts'

Nov 14 08:02:58 - [VPN Log]: Changing to directory '/etc/ipsec.d/crls'

Nov 14 08:02:58 - [VPN Log]: Warning: empty directory

Nov 14 08:08:09 - Send out NTP request to ntp.nasa.gov

Nov 14 08:08:12 - Receive NTP Reply from ntp.nasa.gov

Nov 14 08:08:31 - [VPN Log]: shutting down

Nov 14 08:08:31 - IPSEC EVENT: KLIPS device ipsec0 shut down.

Nov 14 08:08:34 - [VPN Log]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD)

Nov 14 08:08:34 - [VPN Log]: @(#) built on Aug 2 2007:11:09:37:

Nov 14 08:08:34 - [VPN Log]: Setting NAT-Traversal port-4500 floating to on

Nov 14 08:08:34 - [VPN Log]: port floating activation criteria

Nov 14 08:08:34 - [VPN Log]: including NAT-Traversal patch (Version 0.6c)

Nov 14 08:08:34 - [VPN Log]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0)

Nov 14 08:08:34 - [VPN Log]: starting up 1 cryptographic helpers

Nov 14 08:08:34 - [VPN Log]: started helper pid=7368 (fd:5)

Nov 14 08:08:34 - [VPN Log]: Using KLIPS IPsec interface code on 2.4.27-star

Nov 14 08:08:34 - [VPN Log]: Changing to directory '/etc/ipsec.d/cacerts'

Nov 14 08:08:34 - [VPN Log]: Changing to directory '/etc/ipsec.d/aacerts'

Nov 14 08:08:34 - [VPN Log]: Changing to directory '/etc/ipsec.d/ocspcerts'

Nov 14 08:08:34 - [VPN Log]: Changing to directory '/etc/ipsec.d/crls'

Nov 14 08:08:34 - [VPN Log]: Warning: empty directory