-sh-3.2# ./bbupdater -v
Resetting target...
Error: Failed to initialize comm layer:  (is it open by another app?)
Done
-sh-3.2# ./bbupdater 
Error: please specify an FLS or EEP file (with the -f/-e option)
Done
-sh-3.2# ./ieraser 
Resetting the Baseband...Done
Opened: /dev/tty.baseband
iEraser: tool by geohot
thanks to gray and the dev team for the implementation
thanks to nightwatch for the awesome toolchain
and thanks to anonymous, iProof, lazyc0der, and dinopio for the idea for this cool trick
this tool erases your main fw, starting at 0x20000. you need this for the testpoint to work
you need a file called secpack matching your current firmware version in this folder
see http://iphonejtag.blogspot.com for instructions on finding this file
Waiting for data...
Got Header: 77 0b cc
Bus error
-sh-3.2# 
-sh-3.2# 
-sh-3.2# ieraser
Resetting the Baseband...Done
Opened: /dev/tty.baseband
iEraser: tool by geohot
thanks to gray and the dev team for the implementation
thanks to nightwatch for the awesome toolchain
and thanks to anonymous, iProof, lazyc0der, and dinopio for the idea for this cool trick
this tool erases your main fw, starting at 0x20000. you need this for the testpoint to work
you need a file called secpack matching your current firmware version in this folder
see http://iphonejtag.blogspot.com for instructions on finding this file
Waiting for data...
Got Header: 77 0b cc
Bus error
-sh-3.2# bbupdater -v
Resetting target...
pinging the baseband...
issuing +xgendata...
    firmware: DEV_ICE_MODEM_04.02.13_G
 eep version: EEP_VERSION:208
eep revision: EEP_REVISION:1
  bootloader: BOOTLOADER_VERSION:4.6_M3S2
Done
-sh-3.2# ieraser 
Resetting the Baseband...Done
Opened: /dev/tty.baseband
iEraser: tool by geohot
thanks to gray and the dev team for the implementation
thanks to nightwatch for the awesome toolchain
and thanks to anonymous, iProof, lazyc0der, and dinopio for the idea for this cool trick
this tool erases your main fw, starting at 0x20000. you need this for the testpoint to work
you need a file called secpack matching your current firmware version in this folder
see http://iphonejtag.blogspot.com for instructions on finding this file
Waiting for data...
Got Header: 77 0b cc
Bus error
-sh-3.2# ieraser -v
Resetting the Baseband...Done
Opened: /dev/tty.baseband
iEraser: tool by geohot
thanks to gray and the dev team for the implementation
thanks to nightwatch for the awesome toolchain
and thanks to anonymous, iProof, lazyc0der, and dinopio for the idea for this cool trick
this tool erases your main fw, starting at 0x20000. you need this for the testpoint to work
you need a file called secpack matching your current firmware version in this folder
see http://iphonejtag.blogspot.com for instructions on finding this file
Waiting for data...
Got Header: 77 0b cc
Bus error
-sh-3.2# bbupdater -e ICE03.14.08_G.eep -f ICE03.14.08_G.fls 
Preparing to flash using /dev/tty.baseband at 750000 baud
Please reset target
Resetting target...
ProcessDetailUpdated: Boot-loader is active
ProcessDetailUpdated: EBL version: 4.6_M3S2 4..6
ProcessDetailUpdated: Boot mode is: CC
ProcessDetailUpdated: Baud rate set to 750000
ProcessDetailUpdated: Get flash id.
ProcessDetailUpdated: CFI stage 1
ProcessDetailUpdated: Flash ID is: 88620089
ProcessDetailUpdated: CFI stage 2
ProcessDetailUpdated: Boot process finished
ProcessOutlineUpdated: Reading SW version data
ProcessDetailUpdated: Receiving data.
ProcessOutlineUpdated: Process time was 10.0 sec.
Upgrade from ??/ to 
Downloading EEP
ProcessOutlineUpdated: Start downloading from file ICE03.14.08_G.eep.
ProcessDetailUpdated: Sending sec-pack.
ProcessDetailUpdated: Load region 0
ProcessDetailUpdated: Sending end-pack.
ProcessOutlineUpdated: Process time was 928 msec.
Error: Failed to download .EEP: Could not verify downloaded image.
Preparing to flash using /dev/tty.baseband at 750000 baud
Please reset target
Resetting target...
ProcessDetailUpdated: Boot-loader is active
ProcessDetailUpdated: EBL version: 4.6_M3S2 4..6
ProcessDetailUpdated: Boot mode is: CC
ProcessDetailUpdated: Baud rate set to 750000
ProcessDetailUpdated: Get flash id.
ProcessDetailUpdated: CFI stage 1
ProcessDetailUpdated: Flash ID is: 88620089
ProcessDetailUpdated: CFI stage 2
ProcessDetailUpdated: Boot process finished
ProcessOutlineUpdated: Reading SW version data
ProcessDetailUpdated: Receiving data.
ProcessOutlineUpdated: Process time was 10.0 sec.
Upgrade from ??/ to 
Downloading EEP
ProcessOutlineUpdated: Start downloading from file ICE03.14.08_G.eep.
ProcessDetailUpdated: Sending sec-pack.
ProcessDetailUpdated: Load region 0
ProcessDetailUpdated: Sending end-pack.
ProcessOutlineUpdated: Process time was 923 msec.
Error: Failed to download .EEP: Could not verify downloaded image.
Preparing to flash using /dev/tty.baseband at 750000 baud
Please reset target
Resetting target...
ProcessDetailUpdated: Boot-loader is active
ProcessDetailUpdated: EBL version: 4.6_M3S2 4..6
ProcessDetailUpdated: Boot mode is: CC
ProcessDetailUpdated: Baud rate set to 750000
ProcessDetailUpdated: Get flash id.
ProcessDetailUpdated: CFI stage 1
ProcessDetailUpdated: Flash ID is: 88620089
ProcessDetailUpdated: CFI stage 2
ProcessDetailUpdated: Boot process finished
ProcessOutlineUpdated: Reading SW version data
ProcessDetailUpdated: Receiving data.
ProcessOutlineUpdated: Process time was 10.0 sec.
Upgrade from ??/ to 
Downloading EEP
ProcessOutlineUpdated: Start downloading from file ICE03.14.08_G.eep.
ProcessDetailUpdated: Sending sec-pack.
ProcessDetailUpdated: Load region 0
ProcessDetailUpdated: Sending end-pack.
ProcessOutlineUpdated: Process time was 923 msec.
Error: Failed to download .EEP: Could not verify downloaded image.
Preparing to flash using /dev/tty.baseband at 750000 baud
Please reset target
Resetting target...
ProcessDetailUpdated: Boot-loader is active
ProcessDetailUpdated: EBL version: 4.6_M3S2 4..6
ProcessDetailUpdated: Boot mode is: CC
ProcessDetailUpdated: Baud rate set to 750000
ProcessDetailUpdated: Get flash id.
ProcessDetailUpdated: CFI stage 1
ProcessDetailUpdated: Flash ID is: 88620089
ProcessDetailUpdated: CFI stage 2
ProcessDetailUpdated: Boot process finished
ProcessOutlineUpdated: Reading SW version data
ProcessDetailUpdated: Receiving data.
ProcessOutlineUpdated: Process time was 10.0 sec.
Upgrade from ??/ to 
Downloading EEP
ProcessOutlineUpdated: Start downloading from file ICE03.14.08_G.eep.
ProcessDetailUpdated: Sending sec-pack.
ProcessDetailUpdated: Load region 0
ProcessDetailUpdated: Sending end-pack.
ProcessOutlineUpdated: Process time was 923 msec.
Error: Failed to download .EEP: Could not verify downloaded image.
Preparing to flash using /dev/tty.baseband at 750000 baud
Please reset target
Resetting target...
ProcessDetailUpdated: Boot-loader is active
ProcessDetailUpdated: EBL version: 4.6_M3S2 4..6
ProcessDetailUpdated: Boot mode is: CC
ProcessDetailUpdated: Baud rate set to 750000
ProcessDetailUpdated: Get flash id.
ProcessDetailUpdated: CFI stage 1
ProcessDetailUpdated: Flash ID is: 88620089
ProcessDetailUpdated: CFI stage 2
ProcessDetailUpdated: Boot process finished
ProcessOutlineUpdated: Reading SW version data
ProcessDetailUpdated: Receiving data.
ProcessOutlineUpdated: Process time was 10.0 sec.
Upgrade from ??/ to 
Downloading EEP
ProcessOutlineUpdated: Start downloading from file ICE03.14.08_G.eep.
ProcessDetailUpdated: Sending sec-pack.
ProcessDetailUpdated: Load region 0
ProcessDetailUpdated: Sending end-pack.
ProcessOutlineUpdated: Process time was 924 msec.
Error: Failed to download .EEP: Could not verify downloaded image.
Preparing to flash using /dev/tty.baseband at 750000 baud
Please reset target
Resetting target...
ProcessDetailUpdated: Boot-loader is active
ProcessDetailUpdated: EBL version: 4.6_M3S2 4..6
ProcessDetailUpdated: Boot mode is: CC
ProcessDetailUpdated: Baud rate set to 750000
ProcessDetailUpdated: Get flash id.
ProcessDetailUpdated: CFI stage 1
ProcessDetailUpdated: Flash ID is: 88620089
ProcessDetailUpdated: CFI stage 2
ProcessDetailUpdated: Boot process finished
ProcessOutlineUpdated: Reading SW version data
ProcessDetailUpdated: Receiving data.
ProcessOutlineUpdated: Process time was 10.0 sec.
Upgrade from ??/ to 
Downloading EEP
ProcessOutlineUpdated: Start downloading from file ICE03.14.08_G.eep.
ProcessDetailUpdated: Sending sec-pack.
ProcessDetailUpdated: Load region 0
ProcessDetailUpdated: Sending end-pack.
ProcessOutlineUpdated: Process time was 969 msec.
Error: Failed to download .EEP: Could not verify downloaded image.
Preparing to flash using /dev/tty.baseband at 750000 baud
Please reset target
Resetting target...
ProcessDetailUpdated: Boot-loader is active
ProcessDetailUpdated: EBL version: 4.6_M3S2 4..6
ProcessDetailUpdated: Boot mode is: CC
ProcessDetailUpdated: Baud rate set to 750000
ProcessDetailUpdated: Get flash id.
ProcessDetailUpdated: CFI stage 1
ProcessDetailUpdated: Flash ID is: 88620089
ProcessDetailUpdated: CFI stage 2
ProcessDetailUpdated: Boot process finished
ProcessOutlineUpdated: Reading SW version data
ProcessDetailUpdated: Receiving data.
ProcessOutlineUpdated: Process time was 10.0 sec.
Upgrade from ??/ to 
Downloading EEP
ProcessOutlineUpdated: Start downloading from file ICE03.14.08_G.eep.
ProcessDetailUpdated: Sending sec-pack.
ProcessDetailUpdated: Load region 0
ProcessDetailUpdated: Sending end-pack.
ProcessOutlineUpdated: Process time was 923 msec.
Error: Failed to download .EEP: Could not verify downloaded image.
Preparing to flash using /dev/tty.baseband at 750000 baud
Please reset target
Resetting target...
ProcessDetailUpdated: Boot-loader is active
ProcessDetailUpdated: EBL version: 4.6_M3S2 4..6
ProcessDetailUpdated: Boot mode is: CC
ProcessDetailUpdated: Baud rate set to 750000
ProcessDetailUpdated: Get flash id.
ProcessDetailUpdated: CFI stage 1
ProcessDetailUpdated: Flash ID is: 88620089
ProcessDetailUpdated: CFI stage 2
ProcessDetailUpdated: Boot process finished
ProcessOutlineUpdated: Reading SW version data
ProcessDetailUpdated: Receiving data.
ProcessOutlineUpdated: Process time was 10.0 sec.
Upgrade from ??/ to 
Downloading EEP
ProcessOutlineUpdated: Start downloading from file ICE03.14.08_G.eep.
ProcessDetailUpdated: Sending sec-pack.
ProcessDetailUpdated: Load region 0
ProcessDetailUpdated: Sending end-pack.
ProcessOutlineUpdated: Process time was 923 msec.
Error: Failed to download .EEP: Could not verify downloaded image.
Preparing to flash using /dev/tty.baseband at 750000 baud
Please reset target
Resetting target...
ProcessDetailUpdated: Boot-loader is active
ProcessDetailUpdated: EBL version: 4.6_M3S2 4..6
ProcessDetailUpdated: Boot mode is: CC
ProcessDetailUpdated: Baud rate set to 750000
ProcessDetailUpdated: Get flash id.
ProcessDetailUpdated: CFI stage 1
ProcessDetailUpdated: Flash ID is: 88620089
ProcessDetailUpdated: CFI stage 2
ProcessDetailUpdated: Boot process finished
ProcessOutlineUpdated: Reading SW version data
ProcessDetailUpdated: Receiving data.
^C