Inserting STAPI modules
System date is set to:
Fri Mar 24 11:11:00 UTC 2006
stapi_modlist.txt is not exist
Dummy Partitions initialized
ACCESS 00000002
Open Read/Write
PIO 0-5 initialized
ACCESS 00000002EVT_Open=ST_NO_ERROR
Open Read/Write

EVT_Setup(EVT1)=EVACCESS 00000002
Open Read/Write
T_Open=SUTILS: ioctl command 0 [0x00007e00]
T_NO_ERROR
vvj>                    UTILS: ioctl command 7 [0x00007e07]
UTILS_IOC_READREGISTER: at Register_p b9001000
we are not COCOREF !!!
I2C_BACK init ok
I2C_VIDEO init ok
I2C_FRONT init ok
======================================================================

<<< 7109LINUX REFERENCE TREE RELEASE REL_1.0.0 >>>
<<<<<<<<<<<<< 7109 SILICON CUT 2.0 >>>>>>>>>>>>>>

<<<<<<<<<<< Infrastructure & Utilities >>>>>>>>>>>

      BOARD         BOARD-REL_2.4.7
      CHIP          CHIP-REL_2.1.27
      MAKE          MAKE-REL_3.0.2A0
      INCLUDE       INCLUDE-REL_2.1.15
      STEVT         STEVT-REL_2.1.2
      STCOMMON      STCOMMON-REL_2.0.1
      STOS          STOS-REL_2.1.1
      STSYS         STSYS-REL_1.4.2
      TESTTOOL      STTST-REL_3.3.3
      STAPIGAT      STAPIGAT-REL_1.0.66

<<<<<<<<<<<<< Video, Display & Audio >>>>>>>>>>>>>

      STAUDLX       Aud Drv = [STAUDLX-REL_1.0.3]:Recommended LX = [HEGRnD_CBL_ACC_AMP_BL017_10]
      STVID         STVID-REL_3.14.2
      STVMIX        STVMIX-REL_2.0.ACCESS 00000002
Open Read/Write
ioctl command [0XC004060A]
STTUNER_GETREVISION: Revision is STTUNER-REL_6.2.4
STTUNER_GETREVISION: Strlen is 17
10
      STVTG         STVTG-REL_1.14.1
      STVOUT        STVOUT-REL_4.3.1
      STAVMEM       STAVMEM-REL_4.4.0
      STDENC        STDENC-REL_3.3.20
      STHDMI        STHDMI-REL_2.1.1
      STLAYER       STLAYER-REL_3.8.5
      STCLKRV       STCLKRV-REL_5.4.0A0

<<<<<<<<<<<<<<<<< FE & Transport >>>>>>>>>>>>>>>>>

      STTUNER       STTUNER-REL_6.2.4
ACCESS 00000002     STMERGE-REL_2.2.1
Open Read/Write
ioctl command [0XC0040614]

      STPTI4        STPTI_DVB-REL_6.ACCESS 00000002
Open Read/Write
ioctl command [0XC0040600]
6.ioctl command [0XC0040602]
5

ChipID = 46
<<<<<<<<<<<<<<<<<<<< Graphics >>>>>>>>>>>>>>>>>>>>

      STBLIT        STBLIT-REL_1.10.0
      STGFB         STGFB-REL_1.0.1
      STGXOBJ       STGXOBJ-REL_4.0.3

<<<<<<<<<<<<<<<<<< Peripherals >>>>>>>>>>>>>>>>>>>

      STFDMA        STFDMA-REL_2.2.0
      STSMART       STSMART-REL_3.7.1A1
      STBLAST       STBLAST-REL_3.5.0
      STVBI         STVBI-REL_1.3.5
      STTTX         STTTX-REL_3.1.4A3
      STCC          STCC-REL_2.0.13
      STPIO         PRJ-STPIO-REL_1.4.0A2
      STI2C         STI2C-REL_2.4.1

<<<<<<<<<<<<<<<<< DVR Components >>>>>>>>>>>>>>>>>

      STINJ         STINJ-REL_1.0.0
      STDVM         STDVM-REL_3.3.1A0
      STPRM         STPRM-REL_3.2.1A0

======================================================================

 vvj ------ TUNER_USED == 1 -------...

 ------BusIndex  0 -------...
TunerInstance:1 at Address:10, BusIndex:0
Searching...
Found Tuner: DemodAddress:0x10   ID:0x46
Tuner is STV0362 cut 1.0
vvj> but we use TUNER_TER_TDA10046...
TUNER: Evt subscribed Ok
Set TDA10046 TER InitParam!!!
TUNER_Setup(TDA10046_TER,TUNER0,I2C_BACK,EVT)=STTUNER_Init ST_NO_ERROR
demod_tda10046_firmwareload: DSP version controll error
demod_tda10046_firmwareload: DSP version 29;
TUNER_Open=ST_NO_ERioctl command [0XC004060C]
ROR
TUNioctl command [0XC004060D]
ER_Handle_Multiple[TunerInst] = 425984
TUNER_Setup: Setup band list!!!
TUNER_SetBandList=ST_NO_ERROR
TUNER_SetScanList=ST_NO_ERROR
Lock to Transponder/ioctl command [0XC004060F]
STTUNER_SETFREQUENCY: Frequency is 722000
STTUNER_SETFREQUENCY: ScanParams_p->Modulation is 64
Channel #6: ARD
Got uRF=721997634;
RF locked 721997 Hz
        *Can't get BER
STTUNER_SetFrequencioctl command [0XC0040608]
sttuner_ioctl: STTUNER_IOC_GETTUNERINFO
y(TUNER0,722000)=ST_NO_ERROR
Tuner Locked
TUNER_Gioctl command [0XC0040608]
sttuner_ioctl: STTUNER_IOC_GETTUNERINFO
etTunerInfo: FREQ=721997 STATUS=LOCKED FEC=NONE MOD=ALL BAND=3 AGC=TRUE
        *Can't get BER
        *Can't get BER
        *Can't get BER
ACCESS 00000002
Open Read/Write
STMERGE_Init successful
 SERVICE_TSMEpticore: Interrupt task started
RGE_InitParams: DVB
Set Params successful
PTIA and PTIB  are connected successfully to STMERGE_TSIN_0 !
SERVICE_TSMERGE_InitParams: DVB
Set Params successpticore: LoaderFunction called
ful
PTpticore:TC code loaded
IA and PTIB  are connected successfully to STMERGE_TSIN_1 !
SERVICE_TSMERGE_InitParams: DVB
Set Params successful
PTIA and PTIB  are connected successfully to STMERGE_TSIN_2 !
SERVpticore: LoaderFunction called
ICE_TSMEpticore:TC code loaded
RGE_InitParams: DVB
Set Params successful
PTIA and PTIB  are cACCESS 00000002
Open Read/Write
onnectedClockRecoveryFilterTask Created..
 successfully to STMERGE_SWACCESS 00000002
Open Read/Write
STVBI_IOC_INIT

SERVICE_PTI_InitParams: DVB
PTI_Init(PTI, STPTI_STREAM_ID_TSIN0)= PTI_Open(PTI)=ST_NO_ERROR
SERVICE_PTI_InitParams: DVB
PTI_Init(PTI1, STPTI_STREAM_ID_TSIN1)= PTI_Open(PTI1)=ST_NO_ERROR
SERVICE_PTI_InitParams: DVB
PTI_Init(PTI2, STPTI_STREAM_ID_TSIN2)= PTI_Open(PTI2)=ST_NO_ERROR
SERVICE_PTI_InitParams: DVB
PTI_Init(PTI3, STPTI_STREAM_ID_SWTS0)ACCESS 00000002
Open Read/Write
ioctl command [0X00000F00]
= Pioctl command [0X00000F00]
TI_Open(Pioctl command [0X00000F02]
TI3)=ST_ioctl command [0X00000F05]
ioctl command [0X00000F08]
ioctl command [0X00000F02]

ioctl command [0X00000F05]
Pioctl command [0X00000F08]
ioctl command [0X00000F06]
TI_Slots(VID AUD PCR TTX SUioctl command [0X00000F08]
BT DSMCC APG CAP DIP MPT PIP )
CLKRV_Setup(CLKRV)=CLKRV_Openioctl command [0X00000F08]
=ST_NO_ERROioctl command [0X00000F08]
R
DENC_Setioctl command [0X00000F08]
up(DENC)=ioctl command [0X00000F08]
ST_NO_ERROioctl command [0X00000F08]
R
DENC_Open=ST_NO_ERROR
ACCESS 00000002
Open Read/Write
DENC_SetMode(STDENC_MODE_PALBDGHI)=ST_NO_ERROR
VBI_Setup(VBI)=VTG_Setup(VTG)=ST_NO_ERROR
VTG_Setup(AUX_VTG)=ST_NO_ERROR
VTG_Open[0] = ST_NO_ERROR
VTG_SetMode=ST_NO_ERROR
VTG_Open[1] = ST_NO_ERROR
VACCESS 00000002
Open Read/Write
TG_SetMode=ST_NOioctl command [0X00001100]
_ERROR
STVTG_SetOptionalConfiguration for component HD = ST_NO_ERROR
LAYER_Setup(LAYER_VIDEO1)=ST_NO_ERROR
LAYER_Open=ST_NO_ERROR
LAYER[0].Width = 1280, LAYER[0].Height = 720
LAYER_SetLayerParams=ST_NO_ERROR
LAYER_Setup(LAYER_GDP1)=ST_NO_ERROR
LAYER_Open=ST_NO_ERROR
LAYER[1].Width = 1280, LAYER[1].Height = 720
LAYER_SetLayerParams=ST_NO_ERROR
LAYER_Setup(LAYER_GDP2)=ST_NO_ERROR
LAYER_Open=ST_NO_ERROR
LAYER[2].Width = 1280, LAYER[2].Height = 720
LAYER_SetLayerParams=ST_NO_ERROR
LAYER_Setup(LAYER_APLHA)=ST_NO_ERROR
LAYER_Open=ST_NO_ERROR
LAYER[3].Width = 1280, LAYER[3].Height = 720
LAYER_SetLayerParamioctl command [0X00001100]
s=ST_NO_ERROR
LAYER_Setup(LAYER_CURSOR)=ST_NO_ERROR
LAYER_Open=ST_NO_ERROR
LAYER[4].Width = 1280, LAYER[4].Height = 720
LAYER_SetLayerParams=ST_NO_ERROR
LAYER_Setup(LAYER_VIDEO2)=ST_NO_ERROR
LAYER_Open=ST_NO_ERROR
LAYER[5].Width = 720, LAYER[5].Height = 576
LAYEioctl command [0X00001102]
ioctl command [0X00001105]
STVMIX_IOC_ENABLE
R_SetLayerParams=ST_NO_ERROR
VOUT_Init(VOUT_MAIN) -> OK(ST_NO_ERROR)STVOUT_Enable=ST_NO_ERROR
VOUT_Init(VOUT_HDMI) -> OK(ST_NO_ERROR)STVOUT_Enable=ST_NO_ERROR
VOUT_Init(VOUT_DVO) -> OK(ST_NO_ERROR)STVOUT_Enable=ST_NO_ERROR
VOUT_Init(VOUT_AUX) -> OK(ST_NO_ERROR)STVOUT_Enable=ST_NO_ERROR
VMIioctl command [0X0000110B]
STVMIX_IOC_SETTIMEBASE
Xioctl command [0X00000F08]
ioctl command [0X0000110A]
STVMIX_IOC_SETSCREENPARAMS
_Init[VMIX]=ioctl command [0X00001106]
STVMIX_IOC_ENABLE
ioctl command [0X00001102]
STioctl command [0X00001105]
STVMIX_IOC_ENABLE
_NO_ERROR
VMIX_Init[VMIX_AUX]=ST_NO_ERROR
VMIX[0]_Open=ST_NO_ERROR
VMIX[0]_Disable=ST_NO_ERROR
VMIX[0]_SetTimeBase=ST_NO_ERROR
VMIX_SetScreenParams(VMIX, 260,26,1280,720, 50000,0,0 )
VMIX enabled!
VMIX[1]_Open=ST_NO_ERROR
VMIX[1]_Disable=Sioctl command [0X0000110B]
STVMIX_IOC_SETTIMEBASE
T_NO_Eioctl command [0X00000F08]
RROR
VMioctl command [0X0000110A]
STVMIX_IOC_SETSCREENPARAMS
IXioctl command [0X00001106]
STVMIX_IOC_ENABLE
[1]_SetTimeBase=ST_NO_ERROR
VMIX_SetScreenParams(VMIX_AUX, 132,46,720,576, 50000,1,1 )
VMIX enabled!
ioctl command [0X00001110]
STVMIX_IOC_CONNECTLAYERS
ioctl command [0X00001110]
STVMIX_IOC_CONNECTLAYERS
VIDEO_USED: 1
STVID_Init (Device=MAIN_VID, Maxopen=3)UTILS: ioctl command 10 [0x00007e0a]
Type:2
Setting pointers for PTI injection...
GetWriteAdd K&:c0579aa0
InformReadAdd K&:c0579a80

Setup STVID_SETUP_FRAME_ACCESS 00000002
Open Read/Write
ioctl command [0X00001100]
BUioctl command [0X00001102]
FFERS_PARTITION in LMI_VID
Setup STVID_SETUP_DECIMATED_FRAME_BUFFERS_PARTITION in LMI_VID
VID_OpenViewPort(MAIN_VID,LAYER_VIDEO1)=ST_NO_ERROR
VID_OpenViewPort(MAIN_VID,LAYER_VIDEO2)=ST_NO_ERROR
STVID_DisableFrameRateConversion() Success
STPTI_BufferSetOverflowCoACCESS 00000002
Open Read/Write
ioctl command [0X00006500]
ntrol()=ST_Nioctl command [0X00006502]
ioctl command [0X00006505]
ioctl command [0X00006506]
UTILS: ioctl command 7 [0x00007e07]
UTILS_IOC_READREGISTER: at Register_p b9001000
O_ERROR
VID_SetDataInputInterface=ST_NO_ERROR
UTILS_GetKernelInjectionFunctionPointers()=ST_NO_ERROR
STVID_SetDataInputInterface()=ST_NO_ERROR
STHDMI_Init()=0
STHDMI_Open=ST_NO_ERROR
CC_Setup(ClosedCaption)=ST_NO_ERROR
AUD_Setup(MAIN_AUDIO)=0

Close
Segmentation fault