pata_via 0000:00:0f.0: version 0.3.2
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 21 (level, low) -> IRQ 17
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0x0001ff00 ctl 0x0001fe02 bmdma 0x0001fb00 irq 17
ata2: PATA max UDMA/133 cmd 0x0001fd00 ctl 0x0001fc02 bmdma 0x0001fb08 irq 17
ata1.00: ATA-7: ST3500320AS, SD04, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-7: ST3500320AS, SD04, max UDMA/133
ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.01: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
ata1.01: failed to set xfermode (err_mask=0x1)
ata1: failed to recover some devices, retrying in 5 secs
ata1.00: configured for UDMA/33
ata1.01: failed to set xfermode (err_mask=0x1)
ata1.01: limiting speed to UDMA/33:PIO3
ata1: failed to recover some devices, retrying in 5 secs
ata1.00: configured for UDMA/33
ata1.01: failed to set xfermode (err_mask=0x1)
ata1.01: disabled
ata1: failed to recover some devices, retrying in 5 secs
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      ST3500320AS      SD04 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
 or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
 or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0