paul@paul-desktop:~$ dmesg [ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: root=UUID=bd64b621-1ff5-402b-beb8-0f4166b57aab ro quiet splash locale=fr_FR [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 262128) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7660 checksum 0 [ 0.000000] ACPI: RSDP 000F7660, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 3FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FFF3180, 6A06 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: SSDT 3FFF9CC0, 0188 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: MCFG 3FFF9EC0, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 3FFF9C00, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003fff0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 262128) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 262128 [ 0.000000] On node 0 totalpages: 262031 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1124 pages reserved [ 0.000000] DMA zone: 2819 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3527 pages used for memmap [ 0.000000] DMA32 zone: 254505 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 257324 [ 0.000000] Kernel command line: root=UUID=bd64b621-1ff5-402b-beb8-0f4166b57aab ro quiet splash locale=fr_FR [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 27.797042] time.c: Detected 2010.320 MHz processor. [ 27.797767] Console: colour VGA+ 80x25 [ 27.797783] Checking aperture... [ 27.797786] CPU 0: aperture @ 8240000000 size 32 MB [ 27.797788] Aperture too small (32 MB) [ 27.802899] No AGP bridge found [ 27.813229] Memory: 1021380k/1048512k available (2274k kernel code, 26744k reserved, 1181k data, 296k init) [ 27.813277] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 27.890976] Calibrating delay using timer specific routine.. 4023.08 BogoMIPS (lpj=8046163) [ 27.891007] Security Framework v1.0.0 initialized [ 27.891013] SELinux: Disabled at boot. [ 27.891105] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 27.891796] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 27.892115] Mount-cache hash table entries: 256 [ 27.892248] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 27.892250] CPU: L2 Cache: 512K (64 bytes/line) [ 27.892253] CPU 0/0 -> Node 0 [ 27.892255] CPU: Physical Processor ID: 0 [ 27.892257] CPU: Processor Core ID: 0 [ 27.892274] SMP alternatives: switching to UP code [ 27.892534] Early unpacking initramfs... done [ 28.199458] ACPI: Core revision 20070126 [ 28.199520] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 28.244123] Using local APIC timer interrupts. [ 28.293833] result 12564495 [ 28.293835] Detected 12.564 MHz APIC timer. [ 28.294764] SMP alternatives: switching to SMP code [ 28.294886] Booting processor 1/2 APIC 0x1 [ 28.303859] Initializing CPU#1 [ 28.381554] Calibrating delay using timer specific routine.. 4020.95 BogoMIPS (lpj=8041919) [ 28.381560] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 28.381563] CPU: L2 Cache: 512K (64 bytes/line) [ 28.381565] CPU 1/1 -> Node 0 [ 28.381567] CPU: Physical Processor ID: 0 [ 28.381568] CPU: Processor Core ID: 1 [ 28.381646] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 [ 28.386650] Brought up 2 CPUs [ 29.382476] migration_cost=190 [ 29.383750] NET: Registered protocol family 16 [ 29.383833] ACPI: bus type pci registered [ 29.383838] PCI: Using configuration type 1 [ 29.385100] ACPI: EC: Look up EC in DSDT [ 29.392362] ACPI: Interpreter enabled [ 29.392365] ACPI: (supports S0 S1 S3 S4 S5) [ 29.392382] ACPI: Using IOAPIC for interrupt routing [ 29.402013] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 29.402022] PCI: Probing PCI hardware (bus 00) [ 29.402396] PCI: Transparent bridge - 0000:00:09.0 [ 29.402686] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 29.402989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 29.469916] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.470090] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.470262] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 29.470431] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.470601] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.470773] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 29.470943] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.471114] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 29.471285] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 29.471455] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.471628] ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 29.471802] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 29.471973] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.472151] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 29.472330] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 29.472507] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.472696] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 29.472879] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 29.473061] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 29.473242] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 29.473364] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 29.473555] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 29.473743] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 29.473933] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 29.474120] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 29.474308] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 29.474495] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 29.474683] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 29.474871] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 29.475066] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 29.475262] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 29.475457] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 29.475562] Linux Plug and Play Support v0.97 (c) Adam Belay [ 29.475575] pnp: PnP ACPI init [ 29.475584] ACPI: bus type pnp registered [ 29.480756] pnp: PnP ACPI: found 15 devices [ 29.480759] ACPI: ACPI bus type pnp unregistered [ 29.480817] PCI: Using ACPI for IRQ routing [ 29.480821] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 29.480892] NET: Registered protocol family 8 [ 29.480894] NET: Registered protocol family 20 [ 29.481002] pnp: 00:01: ioport range 0x4000-0x407f has been reserved [ 29.481005] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved [ 29.481008] pnp: 00:01: ioport range 0x4400-0x447f has been reserved [ 29.481011] pnp: 00:01: ioport range 0x4480-0x44ff has been reserved [ 29.481014] pnp: 00:01: ioport range 0x4800-0x487f has been reserved [ 29.481016] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved [ 29.481019] pnp: 00:01: iomem range 0x0-0x0 could not be reserved [ 29.481031] pnp: 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved [ 29.481036] pnp: 00:0e: iomem range 0xf0000-0xf3fff could not be reserved [ 29.481039] pnp: 00:0e: iomem range 0xf4000-0xf7fff could not be reserved [ 29.481042] pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved [ 29.481045] pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved [ 29.481310] PCI: Bridge: 0000:00:09.0 [ 29.481312] IO window: disabled. [ 29.481315] MEM window: disabled. [ 29.481317] PREFETCH window: disabled. [ 29.481320] PCI: Bridge: 0000:00:0b.0 [ 29.481321] IO window: disabled. [ 29.481323] MEM window: disabled. [ 29.481325] PREFETCH window: disabled. [ 29.481327] PCI: Bridge: 0000:00:0c.0 [ 29.481329] IO window: disabled. [ 29.481331] MEM window: disabled. [ 29.481333] PREFETCH window: disabled. [ 29.481335] PCI: Bridge: 0000:00:0d.0 [ 29.481336] IO window: disabled. [ 29.481339] MEM window: disabled. [ 29.481340] PREFETCH window: disabled. [ 29.481343] PCI: Bridge: 0000:00:0e.0 [ 29.481345] IO window: a000-afff [ 29.481348] MEM window: d0000000-d1ffffff [ 29.481351] PREFETCH window: c0000000-cfffffff [ 29.481359] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 29.481366] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 29.481372] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 29.481377] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 29.481382] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 29.481435] NET: Registered protocol family 2 [ 29.480802] Time: acpi_pm clocksource has been installed. [ 29.513848] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 29.514252] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) [ 29.516260] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 29.516894] TCP: Hash tables configured (established 131072 bind 65536) [ 29.516898] TCP reno registered [ 29.529909] checking if image is initramfs... it is [ 30.128605] Freeing initrd memory: 7743k freed [ 30.133098] audit: initializing netlink socket (disabled) [ 30.133113] audit(1195657047.300:1): initialized [ 30.135125] VFS: Disk quotas dquot_6.5.1 [ 30.135174] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 30.135256] io scheduler noop registered [ 30.135258] io scheduler anticipatory registered [ 30.135260] io scheduler deadline registered [ 30.135352] io scheduler cfq registered (default) [ 30.152565] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 [ 30.152575] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 30.152581] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 [ 30.152587] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 30.152593] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 [ 30.152599] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 30.152604] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 [ 30.152611] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 30.152618] Boot video device is 0000:01:00.0 [ 30.152765] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 30.152783] assign_interrupt_mode Found MSI capability [ 30.152786] Allocate Port Service[0000:00:0b.0:pcie00] [ 30.152849] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 30.152867] assign_interrupt_mode Found MSI capability [ 30.152869] Allocate Port Service[0000:00:0c.0:pcie00] [ 30.152922] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 30.152939] assign_interrupt_mode Found MSI capability [ 30.152941] Allocate Port Service[0000:00:0d.0:pcie00] [ 30.152991] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 30.153007] assign_interrupt_mode Found MSI capability [ 30.153010] Allocate Port Service[0000:00:0e.0:pcie00] [ 30.176892] Real Time Clock Driver v1.12ac [ 30.176993] Linux agpgart interface v0.102 (c) Dave Jones [ 30.176996] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 30.177082] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 30.177623] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 30.178324] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 30.178451] input: Macintosh mouse button emulation as /class/input/input0 [ 30.178525] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 30.178527] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 30.432393] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 30.432535] mice: PS/2 mouse device common for all mice [ 30.432661] TCP cubic registered [ 30.432714] NET: Registered protocol family 1 [ 30.432909] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 30.432920] Freeing unused kernel memory: 296k freed [ 30.468932] input: AT Translated Set 2 keyboard as /class/input/input1 [ 31.602666] AppArmor: AppArmor initialized<5>audit(1195657048.768:2): type=1505 info="AppArmor initialized" pid=1257 [ 31.609099] fuse init (API version 7.8) [ 31.612729] Failure registering capabilities with primary security module. [ 31.635744] ACPI: Fan [FAN] (on) [ 31.641130] ACPI: Thermal Zone [THRM] (40 C) [ 32.126314] usbcore: registered new interface driver usbfs [ 32.126343] usbcore: registered new interface driver hub [ 32.126368] usbcore: registered new device driver usb [ 32.127116] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 32.127477] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 32.127486] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 32.127658] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 32.127665] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 32.127838] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 32.127855] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd2004000 [ 32.138099] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 32.147736] SCSI subsystem initialized [ 32.152619] libata version 2.21 loaded. [ 32.191730] Floppy drive(s): fd0 is 1.44M [ 32.198200] usb usb1: configuration #1 chosen from 1 choice [ 32.198230] hub 1-0:1.0: USB hub found [ 32.198240] hub 1-0:1.0: 10 ports detected [ 32.227187] FDC 0 is a post-1991 82077 [ 32.303301] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 32.303316] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22 [ 32.303323] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 32.303336] forcedeth: using HIGHDMA [ 32.307942] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 32.307948] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 32.607464] usb 1-4: new low speed USB device using ohci_hcd and address 2 [ 32.826454] eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 [ 32.827764] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 [ 32.827788] NFORCE-CK804: chipset revision 242 [ 32.827790] NFORCE-CK804: not 100% native mode: will probe irqs later [ 32.827796] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller [ 32.827805] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 32.827813] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 32.827821] Probing IDE interface ide0... [ 32.831592] usb 1-4: configuration #1 chosen from 1 choice [ 33.141966] usb 1-10: new full speed USB device using ohci_hcd and address 3 [ 33.343205] usb 1-10: configuration #1 chosen from 1 choice [ 33.347470] usbcore: registered new interface driver hiddev [ 33.357437] input: Logitech USB Receiver as /class/input/input2 [ 33.357459] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-4 [ 33.357476] usbcore: registered new interface driver usbhid [ 33.357480] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 33.566814] hda: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive [ 34.350225] hdb: LITE-ON LTR-52246S, ATAPI CD/DVD-ROM drive [ 34.410735] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 34.416180] Probing IDE interface ide1... [ 34.985050] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 34.985060] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 21 [ 34.985226] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 34.985233] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 34.985529] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 34.985558] ehci_hcd 0000:00:02.1: debug port 1 [ 34.985562] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 34.985572] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000 [ 34.985578] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 34.985606] usb 1-4: USB disconnect, address 2 [ 34.990206] usb usb2: configuration #1 chosen from 1 choice [ 34.990360] hub 2-0:1.0: USB hub found [ 34.990368] hub 2-0:1.0: 10 ports detected [ 35.001235] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 35.001243] Uniform CD-ROM driver Revision: 3.20 [ 35.017184] hdb: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 35.096729] sata_nv 0000:00:07.0: version 3.4 [ 35.097172] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 35.097181] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20 [ 35.097185] sata_nv 0000:00:07.0: Using ADMA mode [ 35.097378] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 35.097741] scsi0 : sata_nv [ 35.097798] scsi1 : sata_nv [ 35.097873] ata1: SATA max UDMA/133 cmd 0xffffc200005e6480 ctl 0xffffc200005e64a0 bmdma 0x000000000001d800 irq 20 [ 35.097878] ata2: SATA max UDMA/133 cmd 0xffffc200005e6580 ctl 0xffffc200005e65a0 bmdma 0x000000000001d808 irq 20 [ 35.116501] usb 1-10: USB disconnect, address 3 [ 35.569241] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 35.616743] ata1.00: ATA-7: ST3320620AS, 3.AAC, max UDMA/133 [ 35.616748] ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 35.683327] ata1.00: configured for UDMA/133 [ 35.971837] usb 1-4: new low speed USB device using ohci_hcd and address 4 [ 35.996915] ata2: SATA link down (SStatus 0 SControl 300) [ 35.995915] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 35.995923] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 35.996401] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 35.996405] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 35.996409] sata_nv 0000:00:08.0: Using ADMA mode [ 35.996603] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 35.996708] scsi2 : sata_nv [ 35.996776] scsi3 : sata_nv [ 35.996856] ata3: SATA max UDMA/133 cmd 0xffffc200005e8480 ctl 0xffffc200005e84a0 bmdma 0x000000000001c400 irq 23 [ 35.996861] ata4: SATA max UDMA/133 cmd 0xffffc200005e8580 ctl 0xffffc200005e85a0 bmdma 0x000000000001c408 irq 23 [ 36.197088] usb 1-4: configuration #1 chosen from 1 choice [ 36.212209] input: Logitech USB Receiver as /class/input/input3 [ 36.212229] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-4 [ 36.312678] ata3: SATA link down (SStatus 0 SControl 300) [ 36.519426] usb 1-10: new full speed USB device using ohci_hcd and address 5 [ 36.624442] ata4: SATA link down (SStatus 0 SControl 300) [ 36.629820] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 36.629832] sd 0:0:0:0: [sda] Write Protect is off [ 36.629835] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 36.629851] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.629902] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 36.629909] sd 0:0:0:0: [sda] Write Protect is off [ 36.629912] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 36.629924] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.629928] sda: sda1 sda2 sda4 < sda5 sda6 > [ 36.660055] sd 0:0:0:0: [sda] Attached SCSI disk [ 36.664217] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 36.729700] usb 1-10: configuration #1 chosen from 1 choice [ 36.922654] Attempting manual resume [ 36.922659] swsusp: Resume From Partition 8:5 [ 36.922661] PM: Checking swsusp image. [ 36.922820] PM: Resume from disk failed. [ 36.948370] kjournald starting. Commit interval 5 seconds [ 36.947278] EXT3-fs: mounted filesystem with ordered data mode. [ 42.606451] ip_tables: (C) 2000-2006 Netfilter Core Team [ 42.646187] Netfilter messages via NETLINK v0.30. [ 42.666141] nf_conntrack version 0.5.0 (4095 buckets, 32760 max) [ 44.517798] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 44.519706] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 44.621758] parport_pc 00:09: reported by Plug and Play ACPI [ 44.621823] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 44.721104] input: PC Speaker as /class/input/input4 [ 44.804782] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 44.804806] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 44.879080] usbcore: registered new interface driver lmpcm_usb [ 44.879086] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/misc/lmpcm_usb.c: v0.5.5:USB Logitech MediaPlay Cordless Mouse driver [ 45.023181] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 45.023187] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22 [ 45.023406] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 45.034779] usbcore: registered new interface driver snd-usb-audio [ 45.352775] intel8x0_measure_ac97_clock: measured 58712 usecs [ 45.352779] intel8x0: clocking to 46969 [ 46.466279] lp0: using parport0 (interrupt-driven). [ 46.529077] Adding 3012148k swap on /dev/sda5. Priority:-1 extents:1 across:3012148k [ 47.594595] EXT3 FS on sda6, internal journal [ 62.261566] input: Power Button (FF) as /class/input/input5 [ 62.261858] ACPI: Power Button (FF) [PWRF] [ 62.263128] input: Power Button (CM) as /class/input/input6 [ 62.263407] ACPI: Power Button (CM) [PWRB] [ 62.298849] No dock devices found. [ 62.686317] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00) [ 62.687176] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 [ 62.687180] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa [ 62.687184] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 63.926438] ppdev: user-space parallel port driver [ 64.031943] audit(1195653481.669:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5352 profile="/usr/sbin/cupsd" [ 66.091888] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 66.168918] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 66.175006] NFSD: starting 90-second grace period [ 67.342667] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 67.342671] vboxdrv: Successfully done. [ 67.528633] Failure registering capabilities with primary security module. [ 67.624481] Bluetooth: Core ver 2.11 [ 67.624544] NET: Registered protocol family 31 [ 67.624547] Bluetooth: HCI device and connection manager initialized [ 67.624550] Bluetooth: HCI socket layer initialized [ 67.638923] Bluetooth: L2CAP ver 2.8 [ 67.638927] Bluetooth: L2CAP socket layer initialized [ 67.661301] Bluetooth: RFCOMM socket layer initialized [ 67.661319] Bluetooth: RFCOMM TTY layer initialized [ 67.661322] Bluetooth: RFCOMM ver 1.8 [ 69.254465] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 69.274731] [fglrx] Maximum main memory to use for locked dma buffers: 923 MBytes. [ 69.274762] [fglrx] ASYNCIO init succeed! [ 69.274964] [fglrx] PAT is enabled successfully! [ 69.275781] [fglrx] module loaded - fglrx 8.42.3 [Oct 19 2007] on minor 0 [ 69.379738] NET: Registered protocol family 10 [ 69.379839] lo: Disabled Privacy Extensions [ 69.398776] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 69.398787] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [ 69.956464] NET: Registered protocol family 17 [ 72.672590] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000 [ 72.672597] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 [ 72.672601] [fglrx] Reserve Block - 2 offset = 0X1ffff000 length = 0X1000 [ 72.672606] [fglrx] Reserve Block - 3 offset = 0Xffc0000 length = 0X40000 [ 78.881174] eth0: no IPv6 routers present [ 9543.505764] Inbound IN=eth0 OUT= MAC= SRC=192.168.2.2 DST=228.67.43.91 LEN=39 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=15947 DPT=15947 LEN=19 [ 9554.465438] Inbound IN=eth0 OUT= MAC= SRC=192.168.2.2 DST=228.67.43.91 LEN=39 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=15947 DPT=15947 LEN=19 [ 9559.810014] Inbound IN=eth0 OUT= MAC= SRC=192.168.2.2 DST=228.67.43.91 LEN=39 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=15947 DPT=15947 LEN=19 [10338.965127] blender[10469]: segfault at 00000000ac437cc0 rip 00002ae6f75f2df0 rsp 00007fffb60c87f8 error 6 [15576.198569] usb 1-9: new full speed USB device using ohci_hcd and address 6 [15576.301056] usb 1-9: configuration #1 chosen from 1 choice [15656.003308] usb 1-9: USB disconnect, address 6 [15740.716549] usb 1-9: new full speed USB device using ohci_hcd and address 7 [15740.822600] usb 1-9: configuration #1 chosen from 1 choice [15752.126961] usb 1-9: USB disconnect, address 7 [15754.415852] usb 1-9: new full speed USB device using ohci_hcd and address 8 [15754.518011] usb 1-9: configuration #1 chosen from 1 choice [15758.384789] usb 1-9: USB disconnect, address 8 [15760.635198] usb 1-9: new full speed USB device using ohci_hcd and address 9 [15760.737410] usb 1-9: configuration #1 chosen from 1 choice [15760.816199] usbcore: registered new interface driver libusual [15760.843778] Initializing USB Mass Storage driver... [15760.844054] scsi4 : SCSI emulation for USB Mass Storage devices [15760.844264] usb-storage: device found at 9 [15760.844267] usb-storage: waiting for device to settle before scanning [15760.844575] usbcore: registered new interface driver usb-storage [15760.844745] USB Mass Storage support registered. [15763.343924] usb-storage: device scan complete [15763.347413] scsi 4:0:0:0: Direct-Access TI OMAP730 PQ: 0 ANSI: 0 CCS [15763.352898] sd 4:0:0:0: [sdb] 1024 512-byte hardware sectors (1 MB) [15763.356405] sd 4:0:0:0: [sdb] Write Protect is off [15763.356411] sd 4:0:0:0: [sdb] Mode Sense: 00 32 00 00 [15763.356414] sd 4:0:0:0: [sdb] Assuming drive cache: write through [15763.365888] sd 4:0:0:0: [sdb] 1024 512-byte hardware sectors (1 MB) [15763.369385] sd 4:0:0:0: [sdb] Write Protect is off [15763.369388] sd 4:0:0:0: [sdb] Mode Sense: 00 32 00 00 [15763.369390] sd 4:0:0:0: [sdb] Assuming drive cache: write through [15763.369393] sdb: [15763.376910] sd 4:0:0:0: [sdb] Attached SCSI removable disk [15763.376951] sd 4:0:0:0: Attached scsi generic sg1 type 0 [15788.961360] usb 1-9: USB disconnect, address 9 [15788.961597] Buffer I/O error on device sdb, logical block 3 [15788.961600] lost page write due to I/O error on sdb [15788.989180] scsi 4:0:0:0: rejecting I/O to dead device [15796.722537] usb 1-9: new full speed USB device using ohci_hcd and address 10 [15796.828583] usb 1-9: configuration #1 chosen from 1 choice [15903.877935] usb 1-9: USB disconnect, address 10 [15905.681329] usb 1-9: new full speed USB device using ohci_hcd and address 11 [15905.787412] usb 1-9: configuration #1 chosen from 1 choice [15905.790420] scsi5 : SCSI emulation for USB Mass Storage devices [15905.790480] usb-storage: device found at 11 [15905.790483] usb-storage: waiting for device to settle before scanning [15908.287999] usb-storage: device scan complete [15908.291494] scsi 5:0:0:0: Direct-Access TI OMAP730 PQ: 0 ANSI: 0 CCS [15908.297199] sd 5:0:0:0: [sdb] 1961984 512-byte hardware sectors (1005 MB) [15908.300469] sd 5:0:0:0: [sdb] Write Protect is off [15908.300473] sd 5:0:0:0: [sdb] Mode Sense: 00 32 00 00 [15908.300476] sd 5:0:0:0: [sdb] Assuming drive cache: write through [15908.309969] sd 5:0:0:0: [sdb] 1961984 512-byte hardware sectors (1005 MB) [15908.313563] sd 5:0:0:0: [sdb] Write Protect is off [15908.313569] sd 5:0:0:0: [sdb] Mode Sense: 00 32 00 00 [15908.313572] sd 5:0:0:0: [sdb] Assuming drive cache: write through [15908.313577] sdb: sdb1 [15908.321500] sd 5:0:0:0: [sdb] Attached SCSI removable disk [15908.321544] sd 5:0:0:0: Attached scsi generic sg1 type 0 [15908.482332] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15908.482340] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15908.482345] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15908.482350] end_request: I/O error, dev sdb, sector 1961976 [15908.482354] Buffer I/O error on device sdb, logical block 245247 [15908.537293] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15908.537300] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15908.537305] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15908.537309] end_request: I/O error, dev sdb, sector 1961976 [15908.537314] Buffer I/O error on device sdb, logical block 245247 [15908.592750] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15908.592757] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15908.592761] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15908.592765] end_request: I/O error, dev sdb, sector 1961976 [15908.592769] Buffer I/O error on device sdb, logical block 245247 [15908.647712] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15908.647719] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15908.647723] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15908.647727] end_request: I/O error, dev sdb, sector 1961976 [15908.647731] Buffer I/O error on device sdb, logical block 245247 [15908.706668] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15908.706676] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15908.706680] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15908.706685] end_request: I/O error, dev sdb, sector 1961976 [15908.706689] Buffer I/O error on device sdb, logical block 245247 [15908.762626] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15908.762634] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15908.762638] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15908.762643] end_request: I/O error, dev sdb, sector 1961976 [15908.762646] Buffer I/O error on device sdb, logical block 245247 [15908.818091] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15908.818099] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15908.818104] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15908.818108] end_request: I/O error, dev sdb, sector 1961976 [15908.818112] Buffer I/O error on device sdb, logical block 245247 [15908.892035] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15908.892044] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15908.892048] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15908.892052] end_request: I/O error, dev sdb, sector 1961976 [15908.892057] Buffer I/O error on device sdb, logical block 245247 [15908.946495] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15908.946504] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15908.946509] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15908.946514] end_request: I/O error, dev sdb, sector 1961976 [15908.946519] Buffer I/O error on device sdb, logical block 245247 [15909.146941] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15909.146950] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15909.146954] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15909.146959] end_request: I/O error, dev sdb, sector 1961976 [15909.146964] Buffer I/O error on device sdb1, logical block 245216 [15909.202305] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15909.202314] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15909.202319] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15909.202325] end_request: I/O error, dev sdb, sector 1961976 [15909.259763] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15909.259772] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15909.259776] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15909.259782] end_request: I/O error, dev sdb, sector 1961976 [15909.313725] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15909.313733] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15909.313738] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15909.313743] end_request: I/O error, dev sdb, sector 1961976 [15909.369683] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15909.369691] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15909.369696] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15909.369700] end_request: I/O error, dev sdb, sector 1961976 [15909.423643] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15909.423652] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15909.423656] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15909.423661] end_request: I/O error, dev sdb, sector 1961976 [15909.479604] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15909.479612] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15909.479617] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15909.479621] end_request: I/O error, dev sdb, sector 1961976 [15909.551548] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15909.551557] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15909.551562] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15909.551567] end_request: I/O error, dev sdb, sector 1961976 [15909.605511] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15909.605519] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15909.605524] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15909.605530] end_request: I/O error, dev sdb, sector 1961976 [15909.732414] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15909.732423] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15909.732427] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15909.732431] end_request: I/O error, dev sdb, sector 1961976 [15909.787878] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15909.787885] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15909.787889] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15909.787893] end_request: I/O error, dev sdb, sector 1961976 [15909.842343] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15909.842350] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15909.842354] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15909.842359] end_request: I/O error, dev sdb, sector 1961976 [15909.896796] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15909.896802] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15909.896806] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15909.896810] end_request: I/O error, dev sdb, sector 1961976 [15909.952004] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15909.952011] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15909.952014] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15909.952019] end_request: I/O error, dev sdb, sector 1961976 [15910.006714] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15910.006720] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15910.006724] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15910.006729] end_request: I/O error, dev sdb, sector 1961976 [15910.061672] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15910.061678] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15910.061681] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15910.061686] end_request: I/O error, dev sdb, sector 1961976 [15910.135120] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15910.135126] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15910.135130] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15910.135135] end_request: I/O error, dev sdb, sector 1961976 [15910.190578] sd 5:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [15910.190584] sd 5:0:0:0: [sdb] Sense Key : Medium Error [current] [15910.190588] sd 5:0:0:0: [sdb] Add. Sense: No additional sense information [15910.190592] end_request: I/O error, dev sdb, sector 1961976 [16112.530050] usb 1-9: USB disconnect, address 11 [16112.548885] scsi 5:0:0:0: rejecting I/O to dead device [16116.199138] usb 1-9: new full speed USB device using ohci_hcd and address 12 [16116.301613] usb 1-9: configuration #1 chosen from 1 choice [16250.214901] usb 1-9: USB disconnect, address 12 [16253.450653] usb 1-9: new full speed USB device using ohci_hcd and address 13 [16253.556860] usb 1-9: configuration #1 chosen from 1 choice [16286.405252] usb 1-9: USB disconnect, address 13 [16365.029927] usb 1-9: new full speed USB device using ohci_hcd and address 14 [16365.132218] usb 1-9: configuration #1 chosen from 1 choice [16526.069985] firestarter[12057]: segfault at 000000000000001a rip 00002ae6f808ac2a rsp 0000000041001040 error 6 [16643.797138] usb 1-9: USB disconnect, address 14 [16646.266071] usb 1-9: new full speed USB device using ohci_hcd and address 15 [16646.372215] usb 1-9: configuration #1 chosen from 1 choice